search := "needle.bmp"
x1 := 1300, y1 := 0, x2 := 1500, y2 := 200
f11::
setbatchlines -1
pToken := Gdip_Startup()
pBitmapNeedle := Gdip_CreateBitmapFromFile(search)
Gdip_GetImageDimensions(pBitmapNeedle, nWidth, nHeight)
Gdip_LockBits(pBitmapNeedle, 0, 0, nWidth, nHeight, nStride, nScan, nBitmapData)
IDXGIFactory := CreateDXGIFactory()
if !IDXGIFactory
{
MsgBox, 16, Error, Create IDXGIFactory failed.
ExitApp
}
loop
{
IDXGIFactory_EnumAdapters(IDXGIFactory, A_Index-1, IDXGIAdapter)
loop
{
hr := IDXGIAdapter_EnumOutputs(IDXGIAdapter, A_Index-1, IDXGIOutput)
if (hr = "DXGI_ERROR_NOT_FOUND")
break
VarSetCapacity(DXGI_OUTPUT_DESC, 88+A_PtrSize, 0)
IDXGIOutput_GetDesc(IDXGIOutput, &DXGI_OUTPUT_DESC)
hWidth := NumGet(DXGI_OUTPUT_DESC, 72, "int")
hHeight := NumGet(DXGI_OUTPUT_DESC, 76, "int")
AttachedToDesktop := NumGet(DXGI_OUTPUT_DESC, 80, "int")
if (AttachedToDesktop = 1)
break 2
}
}
if (AttachedToDesktop != 1)
{
MsgBox, 16, Error, No adapter attached to desktop
ExitApp
}
D3D11CreateDevice(IDXGIAdapter, D3D_DRIVER_TYPE_UNKNOWN := 0, 0, 0, 0, 0, D3D11_SDK_VERSION := 7, d3d_device, 0, d3d_context)
IDXGIOutput1 := IDXGIOutput1_Query(IDXGIOutput)
IDXGIOutput1_DuplicateOutput(IDXGIOutput1, d3d_device, Duplication)
VarSetCapacity(DXGI_OUTDUPL_DESC, 36, 0)
IDXGIOutputDuplication_GetDesc(Duplication, &DXGI_OUTDUPL_DESC)
DesktopImageInSystemMemory := NumGet(DXGI_OUTDUPL_DESC, 32, "uint")
sleep 50 ; As I understand - need some sleep for successful connecting to IDXGIOutputDuplication interface
VarSetCapacity(D3D11_TEXTURE2D_DESC, 44, 0)
NumPut(hWidth, D3D11_TEXTURE2D_DESC, 0, "uint") ; Width
NumPut(hHeight, D3D11_TEXTURE2D_DESC, 4, "uint") ; Height
NumPut(1, D3D11_TEXTURE2D_DESC, 8, "uint") ; MipLevels
NumPut(1, D3D11_TEXTURE2D_DESC, 12, "uint") ; ArraySize
NumPut(DXGI_FORMAT_B8G8R8A8_UNORM := 87, D3D11_TEXTURE2D_DESC, 16, "uint") ; Format
NumPut(1, D3D11_TEXTURE2D_DESC, 20, "uint") ; SampleDescCount
NumPut(0, D3D11_TEXTURE2D_DESC, 24, "uint") ; SampleDescQuality
NumPut(D3D11_USAGE_STAGING := 3, D3D11_TEXTURE2D_DESC, 28, "uint") ; Usage
NumPut(0, D3D11_TEXTURE2D_DESC, 32, "uint") ; BindFlags
NumPut(D3D11_CPU_ACCESS_READ := 0x20000, D3D11_TEXTURE2D_DESC, 36, "uint") ; CPUAccessFlags
NumPut(0, D3D11_TEXTURE2D_DESC, 40, "uint") ; MiscFlags
ID3D11Device_CreateTexture2D(d3d_device, &D3D11_TEXTURE2D_DESC, 0, staging_tex)
x2 := ( !x2 ? hWidth-nWidth+1 : x2-nWidth+1 )
y2 := ( !y2 ? hHeight-nHeight+1 : y2-nHeight+1 )
a := a_tickcount
loop 1000
{
tooltip % A_Index
loop
{
VarSetCapacity(DXGI_OUTDUPL_FRAME_INFO, 48, 0)
AcquireNextFrame := IDXGIOutputDuplication_AcquireNextFrame(Duplication, INFINITE := 0xFFFFFFFF, &DXGI_OUTDUPL_FRAME_INFO, desktop_resource)
LastPresentTime := NumGet(DXGI_OUTDUPL_FRAME_INFO, 0, "int64")
if (LastPresentTime != 0)
{
if (DesktopImageInSystemMemory = 1)
{
VarSetCapacity(DXGI_MAPPED_RECT, A_PtrSize*2, 0)
IDXGIOutputDuplication_MapDesktopSurface(Duplication, &DXGI_MAPPED_RECT)
hStride := NumGet(DXGI_MAPPED_RECT, 0, "int")
hScan := NumGet(DXGI_MAPPED_RECT, A_PtrSize, "ptr")
}
else
{
tex := ID3D11Texture2D_Query(desktop_resource)
ID3D11DeviceContext_CopyResource(d3d_context, staging_tex, tex)
VarSetCapacity(D3D11_MAPPED_SUBRESOURCE, 8+A_PtrSize, 0)
ID3D11DeviceContext_Map(d3d_context, staging_tex, 0, D3D11_MAP_READ := 1, 0, &D3D11_MAPPED_SUBRESOURCE)
hScan := NumGet(D3D11_MAPPED_SUBRESOURCE, 0, "ptr")
hStride := NumGet(D3D11_MAPPED_SUBRESOURCE, A_PtrSize, "uint")
}
if !Gdip_LockedBitsSearch(hStride, hScan, hWidth, hHeight, nStride, nScan, nWidth, nHeight, x, y, x1, y1, x2, y2)
msgbox % x " - " y
if (DesktopImageInSystemMemory = 1)
IDXGIOutputDuplication_UnMapDesktopSurface(Duplication)
else
{
ID3D11DeviceContext_Unmap(d3d_context, staging_tex, 0)
ObjRelease(tex)
}
ObjRelease(desktop_resource)
IDXGIOutputDuplication_ReleaseFrame(duplication)
break
}
ObjRelease(desktop_resource)
IDXGIOutputDuplication_ReleaseFrame(duplication)
}
}
msgbox % a_tickcount - a
Gdip_UnlockBits(pBitmapNeedle, nBitmapData)
Gdip_DisposeImage(pBitmapNeedle)
Release(staging_tex)
Release(d3d_device)
Release(d3d_context)
Release(duplication)
Release(IDXGIAdapter)
Release(IDXGIOutput)
Release(IDXGIOutput1)
Release(IDXGIFactory)
ExitApp
CreateDXGIFactory()
{
if !DllCall("GetModuleHandle","str","DXGI")
DllCall("LoadLibrary","str","DXGI")
if !DllCall("GetModuleHandle","str","D3D11")
DllCall("LoadLibrary","str","D3D11")
GUID(riid, "{7b7166ec-21c7-44ae-b21a-c9ae321ae369}")
hr := DllCall("DXGI\CreateDXGIFactory1", "ptr", &riid, "ptr*", ppFactory)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
return ppFactory
}
IDXGIFactory_EnumAdapters(this, Adapter, ByRef ppAdapter)
{
hr := DllCall(NumGet(NumGet(this+0)+7*A_PtrSize), "ptr", this, "uint", Adapter, "ptr*", ppAdapter)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIAdapter_EnumOutputs(this, Output, ByRef ppOutput)
{
hr := DllCall(NumGet(NumGet(this+0)+7*A_PtrSize), "ptr", this, "uint", Output, "ptr*", ppOutput)
if hr or ErrorLevel
{
if (hr&=0xFFFFFFFF) = 0x887A0002 ; DXGI_ERROR_NOT_FOUND
return "DXGI_ERROR_NOT_FOUND"
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
}
IDXGIAdapter_GetDesc(this, pDesc)
{
hr := DllCall(NumGet(NumGet(this+0)+8*A_PtrSize), "ptr", this, "ptr", pDesc)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutput_GetDesc(this, pDesc)
{
hr := DllCall(NumGet(NumGet(this+0)+7*A_PtrSize), "ptr", this, "ptr", pDesc)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutputDuplication_GetDesc(this, pDesc)
{
DllCall(NumGet(NumGet(this+0)+7*A_PtrSize), "ptr", this, "ptr", pDesc)
if ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutputDuplication_AcquireNextFrame(this, TimeoutInMilliseconds, pFrameInfo, ByRef ppDesktopResource)
{
hr := DllCall(NumGet(NumGet(this+0)+8*A_PtrSize), "ptr", this, "uint", TimeoutInMilliseconds, "ptr", pFrameInfo, "ptr*", ppDesktopResource)
if hr or ErrorLevel
{
if (hr&=0xFFFFFFFF) = 0x887A0027 ; DXGI_ERROR_WAIT_TIMEOUT
return "DXGI_ERROR_WAIT_TIMEOUT"
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
}
D3D11CreateDevice(pAdapter, DriverType, Software, Flags, pFeatureLevels, FeatureLevels, SDKVersion, ByRef ppDevice, ByRef pFeatureLevel, ByRef ppImmediateContext)
{
hr := DllCall("D3D11\D3D11CreateDevice", "ptr", pAdapter, "int", DriverType, "ptr", Software, "uint", Flags, "ptr", pFeatureLevels, "uint", FeatureLevels, "uint", SDKVersion, "ptr*", ppDevice, "ptr*", pFeatureLevel, "ptr*", ppImmediateContext)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
ID3D11Device_CreateTexture2D(this, pDesc, pInitialData, ByRef ppTexture2D)
{
hr := DllCall(NumGet(NumGet(this+0)+5*A_PtrSize), "ptr", this, "ptr", pDesc, "ptr", pInitialData, "ptr*", ppTexture2D)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutputDuplication_MapDesktopSurface(this, pLockedRect)
{
hr := DllCall(NumGet(NumGet(this+0)+12*A_PtrSize), "ptr", this, "ptr", pLockedRect)
if hr or ErrorLevel
{
if (hr&=0xFFFFFFFF) = 0x887A0004 ; DXGI_ERROR_UNSUPPORTED
return "DXGI_ERROR_UNSUPPORTED"
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
}
IDXGIOutputDuplication_UnMapDesktopSurface(this)
{
hr := DllCall(NumGet(NumGet(this+0)+13*A_PtrSize), "ptr", this)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutputDuplication_ReleaseFrame(this)
{
hr := DllCall(NumGet(NumGet(this+0)+14*A_PtrSize), "ptr", this)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutput1_DuplicateOutput(this, pDevice, ByRef ppOutputDuplication)
{
hr := DllCall(NumGet(NumGet(this+0)+22*A_PtrSize), "ptr", this, "ptr", pDevice, "ptr*", ppOutputDuplication)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
IDXGIOutput1_Query(IDXGIOutput)
{
hr := ComObjQuery(IDXGIOutput, "{00cddea8-939b-4b83-a340-a685226666cc}")
if !hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
return hr
}
ID3D11Texture2D_Query(desktop_resource)
{
hr := ComObjQuery(desktop_resource, "{6f15aaf2-d208-4e89-9ab4-489535d34f9c}")
if !hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
return hr
}
ID3D11DeviceContext_CopyResource(this, pDstResource, pSrcResource)
{
hr := DllCall(NumGet(NumGet(this+0)+47*A_PtrSize), "ptr", this, "ptr", pDstResource, "ptr", pSrcResource)
if ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
ID3D11DeviceContext_CopySubresourceRegion(this, pDstResource, DstSubresource, DstX, DstY, DstZ, pSrcResource, SrcSubresource, pSrcBox)
{
hr := DllCall(NumGet(NumGet(this+0)+46*A_PtrSize), "ptr", this, "ptr", pDstResource, "uint", DstSubresource, "uint", DstX, "uint", DstY, "uint", DstZ, "ptr", pSrcResource, "uint", SrcSubresource, "ptr", pSrcBox)
if ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
ID3D11DeviceContext_Map(this, pResource, Subresource, MapType, MapFlags, pMappedResource)
{
hr := DllCall(NumGet(NumGet(this+0)+14*A_PtrSize), "ptr", this, "ptr", pResource, "uint", Subresource, "uint", MapType, "uint", MapFlags, "ptr", pMappedResource)
if hr or ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
ID3D11DeviceContext_Unmap(this, pResource, Subresource)
{
hr := DllCall(NumGet(NumGet(this+0)+15*A_PtrSize), "ptr", this, "ptr", pResource, "uint", Subresource)
if ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
Release(this)
{
DllCall(NumGet(NumGet(this+0)+2*A_PtrSize), "ptr", this)
if ErrorLevel
_Error(A_ThisFunc " error: " hr "`nErrorLevel: " ErrorLevel)
}
GUID(ByRef GUID, sGUID)
{
VarSetCapacity(GUID, 16, 0)
return DllCall("ole32\CLSIDFromString", "WStr", sGUID, "Ptr", &GUID) >= 0 ? &GUID : ""
}
_Error(val)
{
msgbox % val
ExitApp
}
;**********************************************************************************
;
; Gdip_ImageSearch()
; by MasterFocus - 02/APRIL/2013 00:30h BRT
; Thanks to guest3456 for helping me ponder some ideas
; Requires GDIP, Gdip_SetBitmapTransColor() and Gdip_MultiLockedBitsSearch()
; http://www.autohotkey.com/board/topic/71100-gdip-imagesearch/
;
; Licensed under CC BY-SA 3.0 -> http://creativecommons.org/licenses/by-sa/3.0/
; I waive compliance with the "Share Alike" condition of the license EXCLUSIVELY
; for these users: tic , Rseding91 , guest3456
;
;==================================================================================
;
; This function searches for pBitmapNeedle within pBitmapHaystack
; The returned value is the number of instances found (negative = error)
;
; ++ PARAMETERS ++
;
; pBitmapHaystack and pBitmapNeedle
; Self-explanatory bitmap pointers, are the only required parameters
;
; OutputList
; ByRef variable to store the list of coordinates where a match was found
;
; OuterX1, OuterY1, OuterX2, OuterY2
; Equivalent to ImageSearch's X1,Y1,X2,Y2
; Default: 0 for all (which searches the whole haystack area)
;
; Variation
; Just like ImageSearch, a value from 0 to 255
; Default: 0
;
; Trans
; Needle RGB transparent color, should be a numerical value from 0 to 0xFFFFFF
; Default: blank (does not use transparency)
;
; SearchDirection
; Haystack search direction
; Vertical preference:
; 1 = top->left->right->bottom [default]
; 2 = bottom->left->right->top
; 3 = bottom->right->left->top
; 4 = top->right->left->bottom
; Horizontal preference:
; 5 = left->top->bottom->right
; 6 = left->bottom->top->right
; 7 = right->bottom->top->left
; 8 = right->top->bottom->left
;
; Instances
; Maximum number of instances to find when searching (0 = find all)
; Default: 1 (stops after one match is found)
;
; LineDelim and CoordDelim
; Outer and inner delimiters for the list of coordinates (OutputList)
; Defaults: "`n" and ","
;
; ++ RETURN VALUES ++
;
; -1001 ==> invalid haystack and/or needle bitmap pointer
; -1002 ==> invalid variation value
; -1003 ==> X1 and Y1 cannot be negative
; -1004 ==> unable to lock haystack bitmap bits
; -1005 ==> unable to lock needle bitmap bits
; any non-negative value ==> the number of instances found
;
;==================================================================================
;
;**********************************************************************************
Gdip_ImageSearch(pBitmapHaystack,pBitmapNeedle,ByRef OutputList="",OuterX1=0,OuterY1=0,OuterX2=0,OuterY2=0,Variation=0,Trans="",SearchDirection=1,Instances=1,LineDelim="`n",CoordDelim=",") {
; Some validations that can be done before proceeding any further
If !( pBitmapHaystack && pBitmapNeedle )
Return -1001
If Variation not between 0 and 255
return -1002
If ( ( OuterX1 < 0 ) || ( OuterY1 < 0 ) )
return -1003
If SearchDirection not between 1 and 8
SearchDirection := 1
If ( Instances < 0 )
Instances := 0
; Getting the dimensions and locking the bits [haystack]
Gdip_GetImageDimensions(pBitmapHaystack,hWidth,hHeight)
; Last parameter being 1 says the LockMode flag is "READ only"
If Gdip_LockBits(pBitmapHaystack,0,0,hWidth,hHeight,hStride,hScan,hBitmapData,1)
OR !(hWidth := NumGet(hBitmapData,0,"UInt"))
OR !(hHeight := NumGet(hBitmapData,4,"UInt"))
Return -1004
; Careful! From this point on, we must do the following before returning:
; - unlock haystack bits
; Getting the dimensions and locking the bits [needle]
Gdip_GetImageDimensions(pBitmapNeedle,nWidth,nHeight)
; If Trans is correctly specified, create a backup of the original needle bitmap
; and modify the current one, setting the desired color as transparent.
; Also, since a copy is created, we must remember to dispose the new bitmap later.
; This whole thing has to be done before locking the bits.
If Trans between 0 and 0xFFFFFF
{
pOriginalBmpNeedle := pBitmapNeedle
pBitmapNeedle := Gdip_CloneBitmapArea(pOriginalBmpNeedle,0,0,nWidth,nHeight)
Gdip_SetBitmapTransColor(pBitmapNeedle,Trans)
DumpCurrentNeedle := true
}
; Careful! From this point on, we must do the following before returning:
; - unlock haystack bits
; - dispose current needle bitmap (if necessary)
If Gdip_LockBits(pBitmapNeedle,0,0,nWidth,nHeight,nStride,nScan,nBitmapData)
OR !(nWidth := NumGet(nBitmapData,0,"UInt"))
OR !(nHeight := NumGet(nBitmapData,4,"UInt"))
{
If ( DumpCurrentNeedle )
Gdip_DisposeImage(pBitmapNeedle)
Gdip_UnlockBits(pBitmapHaystack,hBitmapData)
Return -1005
}
; Careful! From this point on, we must do the following before returning:
; - unlock haystack bits
; - unlock needle bits
; - dispose current needle bitmap (if necessary)
; Adjust the search box. "OuterX2,OuterY2" will be the last pixel evaluated
; as possibly matching with the needle's first pixel. So, we must avoid going
; beyond this maximum final coordinate.
OuterX2 := ( !OuterX2 ? hWidth-nWidth+1 : OuterX2-nWidth+1 )
OuterY2 := ( !OuterY2 ? hHeight-nHeight+1 : OuterY2-nHeight+1 )
OutputCount := Gdip_MultiLockedBitsSearch(hStride,hScan,hWidth,hHeight
,nStride,nScan,nWidth,nHeight,OutputList,OuterX1,OuterY1,OuterX2,OuterY2
,Variation,SearchDirection,Instances,LineDelim,CoordDelim)
Gdip_UnlockBits(pBitmapHaystack,hBitmapData)
Gdip_UnlockBits(pBitmapNeedle,nBitmapData)
If ( DumpCurrentNeedle )
Gdip_DisposeImage(pBitmapNeedle)
Return OutputCount
}
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;**********************************************************************************
;
; Gdip_SetBitmapTransColor()
; by MasterFocus - 02/APRIL/2013 00:30h BRT
; Requires GDIP
; http://www.autohotkey.com/board/topic/71100-gdip-imagesearch/
;
; Licensed under CC BY-SA 3.0 -> http://creativecommons.org/licenses/by-sa/3.0/
; I waive compliance with the "Share Alike" condition of the license EXCLUSIVELY
; for these users: tic , Rseding91 , guest3456
;
;**********************************************************************************
;==================================================================================
;
; This function modifies the Alpha component for all pixels of a certain color to 0
; The returned value is 0 in case of success, or a negative number otherwise
;
; ++ PARAMETERS ++
;
; pBitmap
; A valid pointer to the bitmap that will be modified
;
; TransColor
; The color to become transparent
; Should range from 0 (black) to 0xFFFFFF (white)
;
; ++ RETURN VALUES ++
;
; -2001 ==> invalid bitmap pointer
; -2002 ==> invalid TransColor
; -2003 ==> unable to retrieve bitmap positive dimensions
; -2004 ==> unable to lock bitmap bits
; -2005 ==> DllCall failed (see ErrorLevel)
; any non-negative value ==> the number of pixels modified by this function
;
;==================================================================================
Gdip_SetBitmapTransColor(pBitmap,TransColor) {
static _SetBmpTrans, Ptr, PtrA
if !( _SetBmpTrans ) {
Ptr := A_PtrSize ? "UPtr" : "UInt"
PtrA := Ptr . "*"
MCode_SetBmpTrans := "
(LTrim Join
8b44240c558b6c241cc745000000000085c07e77538b5c2410568b74242033c9578b7c2414894c24288da424000000
0085db7e458bc18d1439b9020000008bff8a0c113a4e0275178a4c38013a4e01750e8a0a3a0e7508c644380300ff450083c0
0483c204b9020000004b75d38b4c24288b44241c8b5c2418034c242048894c24288944241c75a85f5e5b33c05dc3,405
34c8b5424388bda41c702000000004585c07e6448897c2410458bd84c8b4424304963f94c8d49010f1f800000000085db7e3
8498bc1488bd3660f1f440000410fb648023848017519410fb6480138087510410fb6083848ff7507c640020041ff024883c
00448ffca75d44c03cf49ffcb75bc488b7c241033c05bc3
)"
if ( A_PtrSize == 8 ) ; x64, after comma
MCode_SetBmpTrans := SubStr(MCode_SetBmpTrans,InStr(MCode_SetBmpTrans,",")+1)
else ; x86, before comma
MCode_SetBmpTrans := SubStr(MCode_SetBmpTrans,1,InStr(MCode_SetBmpTrans,",")-1)
VarSetCapacity(_SetBmpTrans, LEN := StrLen(MCode_SetBmpTrans)//2, 0)
Loop, %LEN%
NumPut("0x" . SubStr(MCode_SetBmpTrans,(2*A_Index)-1,2), _SetBmpTrans, A_Index-1, "uchar")
MCode_SetBmpTrans := ""
DllCall("VirtualProtect", Ptr,&_SetBmpTrans, Ptr,VarSetCapacity(_SetBmpTrans), "uint",0x40, PtrA,0)
}
If !pBitmap
Return -2001
If TransColor not between 0 and 0xFFFFFF
Return -2002
Gdip_GetImageDimensions(pBitmap,W,H)
If !(W && H)
Return -2003
If Gdip_LockBits(pBitmap,0,0,W,H,Stride,Scan,BitmapData)
Return -2004
; The following code should be slower than using the MCode approach,
; but will the kept here for now, just for reference.
/*
Count := 0
Loop, %H% {
Y := A_Index-1
Loop, %W% {
X := A_Index-1
CurrentColor := Gdip_GetLockBitPixel(Scan,X,Y,Stride)
If ( (CurrentColor & 0xFFFFFF) == TransColor )
Gdip_SetLockBitPixel(TransColor,Scan,X,Y,Stride), Count++
}
}
*/
; Thanks guest3456 for helping with the initial solution involving NumPut
Gdip_FromARGB(TransColor,A,R,G,B), VarSetCapacity(TransColor,0), VarSetCapacity(TransColor,3,255)
NumPut(B,TransColor,0,"UChar"), NumPut(G,TransColor,1,"UChar"), NumPut(R,TransColor,2,"UChar")
MCount := 0
E := DllCall(&_SetBmpTrans, Ptr,Scan, "int",W, "int",H, "int",Stride, Ptr,&TransColor, "int*",MCount, "cdecl int")
Gdip_UnlockBits(pBitmap,BitmapData)
If ( E != 0 ) {
ErrorLevel := E
Return -2005
}
Return MCount
}
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;**********************************************************************************
;
; Gdip_MultiLockedBitsSearch()
; by MasterFocus - 24/MARCH/2013 06:20h BRT
; Requires GDIP and Gdip_LockedBitsSearch()
; http://www.autohotkey.com/board/topic/71100-gdip-imagesearch/
;
; Licensed under CC BY-SA 3.0 -> http://creativecommons.org/licenses/by-sa/3.0/
; I waive compliance with the "Share Alike" condition of the license EXCLUSIVELY
; for these users: tic , Rseding91 , guest3456
;
;**********************************************************************************
;==================================================================================
;
; This function returns the number of instances found
; The 8 first parameters are the same as in Gdip_LockedBitsSearch()
; The other 10 parameters are the same as in Gdip_ImageSearch()
; Note: the default for the Intances parameter here is 0 (find all matches)
;
;==================================================================================
Gdip_MultiLockedBitsSearch(hStride,hScan,hWidth,hHeight,nStride,nScan,nWidth,nHeight
,ByRef OutputList="",OuterX1=0,OuterY1=0,OuterX2=0,OuterY2=0,Variation=0
,SearchDirection=1,Instances=0,LineDelim="`n",CoordDelim=",")
{
OutputList := ""
OutputCount := !Instances
InnerX1 := OuterX1 , InnerY1 := OuterY1
InnerX2 := OuterX2 , InnerY2 := OuterY2
; The following part is a rather ugly but working hack that I
; came up with to adjust the variables and their increments
; according to the specified Haystack Search Direction
/*
Mod(SD,4) = 0 --> iX = 2 , stepX = +0 , iY = 1 , stepY = +1
Mod(SD,4) = 1 --> iX = 1 , stepX = +1 , iY = 1 , stepY = +1
Mod(SD,4) = 2 --> iX = 1 , stepX = +1 , iY = 2 , stepY = +0
Mod(SD,4) = 3 --> iX = 2 , stepX = +0 , iY = 2 , stepY = +0
SD <= 4 ------> Vertical preference
SD > 4 ------> Horizontal preference
*/
; Set the index and the step (for both X and Y) to +1
iX := 1, stepX := 1, iY := 1, stepY := 1
; Adjust Y variables if SD is 2, 3, 6 or 7
Modulo := Mod(SearchDirection,4)
If ( Modulo > 1 )
iY := 2, stepY := 0
; adjust X variables if SD is 3, 4, 7 or 8
If !Mod(Modulo,3)
iX := 2, stepX := 0
; Set default Preference to vertical and Nonpreference to horizontal
P := "Y", N := "X"
; adjust Preference and Nonpreference if SD is 5, 6, 7 or 8
If ( SearchDirection > 4 )
P := "X", N := "Y"
; Set the Preference Index and the Nonpreference Index
iP := i%P%, iN := i%N%
While (!(OutputCount == Instances) && (0 == Gdip_LockedBitsSearch(hStride,hScan,hWidth,hHeight,nStride
,nScan,nWidth,nHeight,FoundX,FoundY,OuterX1,OuterY1,OuterX2,OuterY2,Variation,SearchDirection)))
{
OutputCount++
OutputList .= LineDelim FoundX CoordDelim FoundY
Outer%P%%iP% := Found%P%+step%P%
Inner%N%%iN% := Found%N%+step%N%
Inner%P%1 := Found%P%
Inner%P%2 := Found%P%+1
While (!(OutputCount == Instances) && (0 == Gdip_LockedBitsSearch(hStride,hScan,hWidth,hHeight,nStride
,nScan,nWidth,nHeight,FoundX,FoundY,InnerX1,InnerY1,InnerX2,InnerY2,Variation,SearchDirection)))
{
OutputCount++
OutputList .= LineDelim FoundX CoordDelim FoundY
Inner%N%%iN% := Found%N%+step%N%
}
}
OutputList := SubStr(OutputList,1+StrLen(LineDelim))
OutputCount -= !Instances
Return OutputCount
}
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
;**********************************************************************************
;
; Gdip_LockedBitsSearch()
; by MasterFocus - 24/MARCH/2013 06:20h BRT
; Mostly adapted from previous work by tic and Rseding91
;
; Requires GDIP
; http://www.autohotkey.com/board/topic/71100-gdip-imagesearch/
;
; Licensed under CC BY-SA 3.0 -> http://creativecommons.org/licenses/by-sa/3.0/
; I waive compliance with the "Share Alike" condition of the license EXCLUSIVELY
; for these users: tic , Rseding91 , guest3456
;
;**********************************************************************************
;==================================================================================
;
; This function searches for a single match of nScan within hScan
;
; ++ PARAMETERS ++
;
; hStride, hScan, hWidth and hHeight
; Haystack stuff, extracted from a BitmapData, extracted from a Bitmap
;
; nStride, nScan, nWidth and nHeight
; Needle stuff, extracted from a BitmapData, extracted from a Bitmap
;
; x and y
; ByRef variables to store the X and Y coordinates of the image if it's found
; Default: "" for both
;
; sx1, sy1, sx2 and sy2
; These can be used to crop the search area within the haystack
; Default: "" for all (does not crop)
;
; Variation
; Same as the builtin ImageSearch command
; Default: 0
;
; sd
; Haystack search direction
; Vertical preference:
; 1 = top->left->right->bottom [default]
; 2 = bottom->left->right->top
; 3 = bottom->right->left->top
; 4 = top->right->left->bottom
; Horizontal preference:
; 5 = left->top->bottom->right
; 6 = left->bottom->top->right
; 7 = right->bottom->top->left
; 8 = right->top->bottom->left
; This value is passed to the internal MCoded function
;
; ++ RETURN VALUES ++
;
; -3001 to -3006 ==> search area incorrectly defined
; -3007 ==> DllCall returned blank
; 0 ==> DllCall succeeded and a match was found
; -4001 ==> DllCall succeeded but a match was not found
; anything else ==> the error value returned by the unsuccessful DllCall
;
;==================================================================================
Gdip_LockedBitsSearch(hStride,hScan,hWidth,hHeight,nStride,nScan,nWidth,nHeight
,ByRef x="",ByRef y="",sx1=0,sy1=0,sx2=0,sy2=0,Variation=0,sd=1)
{
static _ImageSearch, Ptr, PtrA
; Initialize all MCode stuff, if necessary
if !( _ImageSearch ) {
Ptr := A_PtrSize ? "UPtr" : "UInt"
PtrA := Ptr . "*"
MCode_ImageSearch := "
(LTrim Join
8b44243883ec205355565783f8010f857a0100008b7c2458897c24143b7c24600f8db50b00008b44244c8b5c245c8b
4c24448b7424548be80fafef896c242490897424683bf30f8d0a0100008d64240033c033db8bf5896c241c895c2420894424
183b4424480f8d0401000033c08944241085c90f8e9d0000008b5424688b7c24408beb8d34968b54246403df8d4900b80300
0000803c18008b442410745e8b44243c0fb67c2f020fb64c06028d04113bf87f792bca3bf97c738b44243c0fb64c06018b44
24400fb67c28018d04113bf87f5a2bca3bf97c548b44243c0fb63b0fb60c068d04113bf87f422bca3bf97c3c8b4424108b7c
24408b4c24444083c50483c30483c604894424103bc17c818b5c24208b74241c0374244c8b44241840035c24508974241ce9
2dffffff8b6c24688b5c245c8b4c244445896c24683beb8b6c24240f8c06ffffff8b44244c8b7c24148b7424544703e8897c
2414896c24243b7c24600f8cd5feffffe96b0a00008b4424348b4c246889088b4424388b4c24145f5e5d890833c05b83c420
c383f8020f85870100008b7c24604f897c24103b7c24580f8c310a00008b44244c8b5c245c8b4c24448bef0fafe8f7d88944
24188b4424548b742418896c24288d4900894424683bc30f8d0a0100008d64240033c033db8bf5896c2420895c241c894424
243b4424480f8d0401000033c08944241485c90f8e9d0000008b5424688b7c24408beb8d34968b54246403df8d4900b80300
0000803c03008b442414745e8b44243c0fb67c2f020fb64c06028d04113bf87f792bca3bf97c738b44243c0fb64c06018b44
24400fb67c28018d04113bf87f5a2bca3bf97c548b44243c0fb63b0fb60c068d04113bf87f422bca3bf97c3c8b4424148b7c
24408b4c24444083c50483c30483c604894424143bc17c818b5c241c8b7424200374244c8b44242440035c245089742420e9
2dffffff8b6c24688b5c245c8b4c244445896c24683beb8b6c24280f8c06ffffff8b7c24108b4424548b7424184f03ee897c
2410896c24283b7c24580f8dd5feffffe9db0800008b4424348b4c246889088b4424388b4c24105f5e5d890833c05b83c420
c383f8030f85650100008b7c24604f897c24103b7c24580f8ca10800008b44244c8b6c245c8b5c24548b4c24448bf70faff0
4df7d8896c242c897424188944241c8bff896c24683beb0f8c020100008d64240033c033db89742424895c2420894424283b
4424480f8d76ffffff33c08944241485c90f8e9f0000008b5424688b7c24408beb8d34968b54246403dfeb038d4900b80300
0000803c03008b442414745e8b44243c0fb67c2f020fb64c06028d04113bf87f752bca3bf97c6f8b44243c0fb64c06018b44
24400fb67c28018d04113bf87f562bca3bf97c508b44243c0fb63b0fb60c068d04113bf87f3e2bca3bf97c388b4424148b7c
24408b4c24444083c50483c30483c604894424143bc17c818b5c24208b7424248b4424280374244c40035c2450e92bffffff
8b6c24688b5c24548b4c24448b7424184d896c24683beb0f8d0affffff8b7c24108b44241c4f03f0897c2410897424183b7c
24580f8c580700008b6c242ce9d4feffff83f8040f85670100008b7c2458897c24103b7c24600f8d340700008b44244c8b6c
245c8b5c24548b4c24444d8bf00faff7896c242c8974241ceb098da424000000008bff896c24683beb0f8c020100008d6424
0033c033db89742424895c2420894424283b4424480f8d06feffff33c08944241485c90f8e9f0000008b5424688b7c24408b
eb8d34968b54246403dfeb038d4900b803000000803c03008b442414745e8b44243c0fb67c2f020fb64c06028d04113bf87f
752bca3bf97c6f8b44243c0fb64c06018b4424400fb67c28018d04113bf87f562bca3bf97c508b44243c0fb63b0fb60c068d
04113bf87f3e2bca3bf97c388b4424148b7c24408b4c24444083c50483c30483c604894424143bc17c818b5c24208b742424
8b4424280374244c40035c2450e92bffffff8b6c24688b5c24548b4c24448b74241c4d896c24683beb0f8d0affffff8b4424
4c8b7c24104703f0897c24108974241c3b7c24600f8de80500008b6c242ce9d4feffff83f8050f85890100008b7c2454897c
24683b7c245c0f8dc40500008b5c24608b6c24588b44244c8b4c2444eb078da42400000000896c24103beb0f8d200100008b
e80faf6c2458896c241c33c033db8bf5896c2424895c2420894424283b4424480f8d0d01000033c08944241485c90f8ea600
00008b5424688b7c24408beb8d34968b54246403dfeb0a8da424000000008d4900b803000000803c03008b442414745e8b44
243c0fb67c2f020fb64c06028d04113bf87f792bca3bf97c738b44243c0fb64c06018b4424400fb67c28018d04113bf87f5a
2bca3bf97c548b44243c0fb63b0fb60c068d04113bf87f422bca3bf97c3c8b4424148b7c24408b4c24444083c50483c30483
c604894424143bc17c818b5c24208b7424240374244c8b44242840035c245089742424e924ffffff8b7c24108b6c241c8b44
244c8b5c24608b4c24444703e8897c2410896c241c3bfb0f8cf3feffff8b7c24688b6c245847897c24683b7c245c0f8cc5fe
ffffe96b0400008b4424348b4c24688b74241089088b4424385f89305e5d33c05b83c420c383f8060f85670100008b7c2454
897c24683b7c245c0f8d320400008b6c24608b5c24588b44244c8b4c24444d896c24188bff896c24103beb0f8c1a0100008b
f50faff0f7d88974241c8944242ceb038d490033c033db89742424895c2420894424283b4424480f8d06fbffff33c0894424
1485c90f8e9f0000008b5424688b7c24408beb8d34968b54246403dfeb038d4900b803000000803c03008b442414745e8b44
243c0fb67c2f020fb64c06028d04113bf87f752bca3bf97c6f8b44243c0fb64c06018b4424400fb67c28018d04113bf87f56
2bca3bf97c508b44243c0fb63b0fb60c068d04113bf87f3e2bca3bf97c388b4424148b7c24408b4c24444083c50483c30483
c604894424143bc17c818b5c24208b7424248b4424280374244c40035c2450e92bffffff8b6c24108b74241c0374242c8b5c
24588b4c24444d896c24108974241c3beb0f8d02ffffff8b44244c8b7c246847897c24683b7c245c0f8de60200008b6c2418
e9c2feffff83f8070f85670100008b7c245c4f897c24683b7c24540f8cc10200008b6c24608b5c24588b44244c8b4c24444d
896c241890896c24103beb0f8c1a0100008bf50faff0f7d88974241c8944242ceb038d490033c033db89742424895c242089
4424283b4424480f8d96f9ffff33c08944241485c90f8e9f0000008b5424688b7c24408beb8d34968b54246403dfeb038d49
00b803000000803c18008b442414745e8b44243c0fb67c2f020fb64c06028d04113bf87f752bca3bf97c6f8b44243c0fb64c
06018b4424400fb67c28018d04113bf87f562bca3bf97c508b44243c0fb63b0fb60c068d04113bf87f3e2bca3bf97c388b44
24148b7c24408b4c24444083c50483c30483c604894424143bc17c818b5c24208b7424248b4424280374244c40035c2450e9
2bffffff8b6c24108b74241c0374242c8b5c24588b4c24444d896c24108974241c3beb0f8d02ffffff8b44244c8b7c24684f
897c24683b7c24540f8c760100008b6c2418e9c2feffff83f8080f85640100008b7c245c4f897c24683b7c24540f8c510100
008b5c24608b6c24588b44244c8b4c24448d9b00000000896c24103beb0f8d200100008be80faf6c2458896c241c33c033db
8bf5896c2424895c2420894424283b4424480f8d9dfcffff33c08944241485c90f8ea60000008b5424688b7c24408beb8d34
968b54246403dfeb0a8da424000000008d4900b803000000803c03008b442414745e8b44243c0fb67c2f020fb64c06028d04
113bf87f792bca3bf97c738b44243c0fb64c06018b4424400fb67c28018d04113bf87f5a2bca3bf97c548b44243c0fb63b0f
b604068d0c103bf97f422bc23bf87c3c8b4424148b7c24408b4c24444083c50483c30483c604894424143bc17c818b5c2420
8b7424240374244c8b44242840035c245089742424e924ffffff8b7c24108b6c241c8b44244c8b5c24608b4c24444703e889
7c2410896c241c3bfb0f8cf3feffff8b7c24688b6c24584f897c24683b7c24540f8dc5feffff8b4424345fc700ffffffff8b
4424345e5dc700ffffffffb85ff0ffff5b83c420c3,4c894c24204c89442418488954241048894c24085355565741544
155415641574883ec188b8424c80000004d8bd94d8bd0488bda83f8010f85b3010000448b8c24a800000044890c24443b8c2
4b80000000f8d66010000448bac24900000008b9424c0000000448b8424b00000008bbc2480000000448b9424a0000000418
bcd410fafc9894c24040f1f84000000000044899424c8000000453bd00f8dfb000000468d2495000000000f1f80000000003
3ed448bf933f6660f1f8400000000003bac24880000000f8d1701000033db85ff7e7e458bf4448bce442bf64503f7904d63c
14d03c34180780300745a450fb65002438d040e4c63d84c035c2470410fb64b028d0411443bd07f572bca443bd17c50410fb
64b01450fb650018d0411443bd07f3e2bca443bd17c37410fb60b450fb6108d0411443bd07f272bca443bd17c204c8b5c247
8ffc34183c1043bdf7c8fffc54503fd03b42498000000e95effffff8b8424c8000000448b8424b00000008b4c24044c8b5c2
478ffc04183c404898424c8000000413bc00f8c20ffffff448b0c24448b9424a000000041ffc14103cd44890c24894c24044
43b8c24b80000000f8cd8feffff488b5c2468488b4c2460b85ff0ffffc701ffffffffc703ffffffff4883c418415f415e415
d415c5f5e5d5bc38b8424c8000000e9860b000083f8020f858c010000448b8c24b800000041ffc944890c24443b8c24a8000
0007cab448bac2490000000448b8424c00000008b9424b00000008bbc2480000000448b9424a0000000418bc9410fafcd418
bc5894c2404f7d8894424080f1f400044899424c8000000443bd20f8d02010000468d2495000000000f1f80000000004533f
6448bf933f60f1f840000000000443bb424880000000f8d56ffffff33db85ff0f8e81000000418bec448bd62bee4103ef496
3d24903d3807a03007460440fb64a02418d042a4c63d84c035c2470410fb64b02428d0401443bc87f5d412bc8443bc97c554
10fb64b01440fb64a01428d0401443bc87f42412bc8443bc97c3a410fb60b440fb60a428d0401443bc87f29412bc8443bc97
c214c8b5c2478ffc34183c2043bdf7c8a41ffc64503fd03b42498000000e955ffffff8b8424c80000008b9424b00000008b4
c24044c8b5c2478ffc04183c404898424c80000003bc20f8c19ffffff448b0c24448b9424a0000000034c240841ffc9894c2
40444890c24443b8c24a80000000f8dd0feffffe933feffff83f8030f85c4010000448b8c24b800000041ffc944898c24c80
00000443b8c24a80000000f8c0efeffff8b842490000000448b9c24b0000000448b8424c00000008bbc248000000041ffcb4
18bc98bd044895c24080fafc8f7da890c24895424048b9424a0000000448b542404458beb443bda0f8c13010000468d249d0
000000066660f1f84000000000033ed448bf933f6660f1f8400000000003bac24880000000f8d0801000033db85ff0f8e960
00000488b4c2478458bf4448bd6442bf64503f70f1f8400000000004963d24803d1807a03007460440fb64a02438d04164c6
3d84c035c2470410fb64b02428d0401443bc87f63412bc8443bc97c5b410fb64b01440fb64a01428d0401443bc87f48412bc
8443bc97c40410fb60b440fb60a428d0401443bc87f2f412bc8443bc97c27488b4c2478ffc34183c2043bdf7c8a8b8424900
00000ffc54403f803b42498000000e942ffffff8b9424a00000008b8424900000008b0c2441ffcd4183ec04443bea0f8d11f
fffff448b8c24c8000000448b542404448b5c240841ffc94103ca44898c24c8000000890c24443b8c24a80000000f8dc2fef
fffe983fcffff488b4c24608b8424c8000000448929488b4c2468890133c0e981fcffff83f8040f857f010000448b8c24a80
0000044890c24443b8c24b80000000f8d48fcffff448bac2490000000448b9424b00000008b9424c0000000448b8424a0000
0008bbc248000000041ffca418bcd4489542408410fafc9894c2404669044899424c8000000453bd00f8cf8000000468d249
5000000000f1f800000000033ed448bf933f6660f1f8400000000003bac24880000000f8df7fbffff33db85ff7e7e458bf44
48bce442bf64503f7904d63c14d03c34180780300745a450fb65002438d040e4c63d84c035c2470410fb64b028d0411443bd
07f572bca443bd17c50410fb64b01450fb650018d0411443bd07f3e2bca443bd17c37410fb60b450fb6108d0411443bd07f2
72bca443bd17c204c8b5c2478ffc34183c1043bdf7c8fffc54503fd03b42498000000e95effffff8b8424c8000000448b842
4a00000008b4c24044c8b5c2478ffc84183ec04898424c8000000413bc00f8d20ffffff448b0c24448b54240841ffc14103c
d44890c24894c2404443b8c24b80000000f8cdbfeffffe9defaffff83f8050f85ab010000448b8424a000000044890424443
b8424b00000000f8dc0faffff8b9424c0000000448bac2498000000448ba424900000008bbc2480000000448b8c24a800000
0428d0c8500000000898c24c800000044894c2404443b8c24b80000000f8d09010000418bc4410fafc18944240833ed448bf
833f6660f1f8400000000003bac24880000000f8d0501000033db85ff0f8e87000000448bf1448bce442bf64503f74d63c14
d03c34180780300745d438d040e4c63d84d03da450fb65002410fb64b028d0411443bd07f5f2bca443bd17c58410fb64b014
50fb650018d0411443bd07f462bca443bd17c3f410fb60b450fb6108d0411443bd07f2f2bca443bd17c284c8b5c24784c8b5
42470ffc34183c1043bdf7c8c8b8c24c8000000ffc54503fc4103f5e955ffffff448b4424048b4424088b8c24c80000004c8
b5c24784c8b54247041ffc04103c4448944240489442408443b8424b80000000f8c0effffff448b0424448b8c24a80000004
1ffc083c10444890424898c24c8000000443b8424b00000000f8cc5feffffe946f9ffff488b4c24608b042489018b4424044
88b4c2468890133c0e945f9ffff83f8060f85aa010000448b8c24a000000044894c2404443b8c24b00000000f8d0bf9ffff8
b8424b8000000448b8424c0000000448ba424900000008bbc2480000000428d0c8d00000000ffc88944240c898c24c800000
06666660f1f840000000000448be83b8424a80000000f8c02010000410fafc4418bd4f7da891424894424084533f6448bf83
3f60f1f840000000000443bb424880000000f8df900000033db85ff0f8e870000008be9448bd62bee4103ef4963d24903d38
07a03007460440fb64a02418d042a4c63d84c035c2470410fb64b02428d0401443bc87f64412bc8443bc97c5c410fb64b014
40fb64a01428d0401443bc87f49412bc8443bc97c41410fb60b440fb60a428d0401443bc87f30412bc8443bc97c284c8b5c2
478ffc34183c2043bdf7c8a8b8c24c800000041ffc64503fc03b42498000000e94fffffff8b4424088b8c24c80000004c8b5
c247803042441ffcd89442408443bac24a80000000f8d17ffffff448b4c24048b44240c41ffc183c10444894c2404898c24c
8000000443b8c24b00000000f8ccefeffffe991f7ffff488b4c24608b4424048901488b4c246833c0448929e992f7ffff83f
8070f858d010000448b8c24b000000041ffc944894c2404443b8c24a00000000f8c55f7ffff8b8424b8000000448b8424c00
00000448ba424900000008bbc2480000000428d0c8d00000000ffc8890424898c24c8000000660f1f440000448be83b8424a
80000000f8c02010000410fafc4418bd4f7da8954240c8944240833ed448bf833f60f1f8400000000003bac24880000000f8
d4affffff33db85ff0f8e89000000448bf1448bd6442bf64503f74963d24903d3807a03007460440fb64a02438d04164c63d
84c035c2470410fb64b02428d0401443bc87f63412bc8443bc97c5b410fb64b01440fb64a01428d0401443bc87f48412bc84
43bc97c40410fb60b440fb60a428d0401443bc87f2f412bc8443bc97c274c8b5c2478ffc34183c2043bdf7c8a8b8c24c8000
000ffc54503fc03b42498000000e94fffffff8b4424088b8c24c80000004c8b5c24780344240c41ffcd89442408443bac24a
80000000f8d17ffffff448b4c24048b042441ffc983e90444894c2404898c24c8000000443b8c24a00000000f8dcefeffffe
9e1f5ffff83f8080f85ddf5ffff448b8424b000000041ffc84489442404443b8424a00000000f8cbff5ffff8b9424c000000
0448bac2498000000448ba424900000008bbc2480000000448b8c24a8000000428d0c8500000000898c24c800000044890c2
4443b8c24b80000000f8d08010000418bc4410fafc18944240833ed448bf833f6660f1f8400000000003bac24880000000f8
d0501000033db85ff0f8e87000000448bf1448bce442bf64503f74d63c14d03c34180780300745d438d040e4c63d84d03da4
50fb65002410fb64b028d0411443bd07f5f2bca443bd17c58410fb64b01450fb650018d0411443bd07f462bca443bd17c3f4
10fb603450fb6108d0c10443bd17f2f2bc2443bd07c284c8b5c24784c8b542470ffc34183c1043bdf7c8c8b8c24c8000000f
fc54503fc4103f5e955ffffff448b04248b4424088b8c24c80000004c8b5c24784c8b54247041ffc04103c44489042489442
408443b8424b80000000f8c10ffffff448b442404448b8c24a800000041ffc883e9044489442404898c24c8000000443b842
4a00000000f8dc6feffffe946f4ffff8b442404488b4c246089018b0424488b4c2468890133c0e945f4ffff
)"
if ( A_PtrSize == 8 ) ; x64, after comma
MCode_ImageSearch := SubStr(MCode_ImageSearch,InStr(MCode_ImageSearch,",")+1)
else ; x86, before comma
MCode_ImageSearch := SubStr(MCode_ImageSearch,1,InStr(MCode_ImageSearch,",")-1)
VarSetCapacity(_ImageSearch, LEN := StrLen(MCode_ImageSearch)//2, 0)
Loop, %LEN%
NumPut("0x" . SubStr(MCode_ImageSearch,(2*A_Index)-1,2), _ImageSearch, A_Index-1, "uchar")
MCode_ImageSearch := ""
DllCall("VirtualProtect", Ptr,&_ImageSearch, Ptr,VarSetCapacity(_ImageSearch), "uint",0x40, PtrA,0)
}
; Abort if an initial coordinates is located before a final coordinate
If ( sx2 < sx1 )
return -3001
If ( sy2 < sy1 )
return -3002
; Check the search box. "sx2,sy2" will be the last pixel evaluated
; as possibly matching with the needle's first pixel. So, we must
; avoid going beyond this maximum final coordinate.
If ( sx2 > (hWidth-nWidth+1) )
return -3003
If ( sy2 > (hHeight-nHeight+1) )
return -3004
; Abort if the width or height of the search box is 0
If ( sx2-sx1 == 0 )
return -3005
If ( sy2-sy1 == 0 )
return -3006
; The DllCall parameters are the same for easier C code modification,
; even though they aren't all used on the _ImageSearch version
x := 0, y := 0
, E := DllCall( &_ImageSearch, "int*",x, "int*",y, Ptr,hScan, Ptr,nScan, "int",nWidth, "int",nHeight
, "int",hStride, "int",nStride, "int",sx1, "int",sy1, "int",sx2, "int",sy2, "int",Variation
, "int",sd, "cdecl int")
Return ( E == "" ? -3007 : E )
}
; Gdip standard library v1.45 by tic (Tariq Porter) 07/09/11
; Modifed by Rseding91 using fincs 64 bit compatible Gdip library 5/1/2013
; Supports: Basic, _L ANSi, _L Unicode x86 and _L Unicode x64
;
; Updated 2/20/2014 - fixed Gdip_CreateRegion() and Gdip_GetClipRegion() on AHK Unicode x86
; Updated 5/13/2013 - fixed Gdip_SetBitmapToClipboard() on AHK Unicode x64
;
;#####################################################################################
;#####################################################################################
; STATUS ENUMERATION
; Return values for functions specified to have status enumerated return type
;#####################################################################################
;
; Ok = = 0
; GenericError = 1
; InvalidParameter = 2
; OutOfMemory = 3
; ObjectBusy = 4
; InsufficientBuffer = 5
; NotImplemented = 6
; Win32Error = 7
; WrongState = 8
; Aborted = 9
; FileNotFound = 10
; ValueOverflow = 11
; AccessDenied = 12
; UnknownImageFormat = 13
; FontFamilyNotFound = 14
; FontStyleNotFound = 15
; NotTrueTypeFont = 16
; UnsupportedGdiplusVersion = 17
; GdiplusNotInitialized = 18
; PropertyNotFound = 19
; PropertyNotSupported = 20
; ProfileNotFound = 21
;
;#####################################################################################
;#####################################################################################
; FUNCTIONS
;#####################################################################################
;
; UpdateLayeredWindow(hwnd, hdc, x="", y="", w="", h="", Alpha=255)
; BitBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, Raster="")
; StretchBlt(dDC, dx, dy, dw, dh, sDC, sx, sy, sw, sh, Raster="")
; SetImage(hwnd, hBitmap)
; Gdip_BitmapFromScreen(Screen=0, Raster="")
; CreateRectF(ByRef RectF, x, y, w, h)
; CreateSizeF(ByRef SizeF, w, h)
; CreateDIBSection
;
;#####################################################################################
; Function: UpdateLayeredWindow
; Description: Updates a layered window with the handle to the DC of a gdi bitmap
;
; hwnd Handle of the layered window to update
; hdc Handle to the DC of the GDI bitmap to update the window with
; Layeredx x position to place the window
; Layeredy y position to place the window
; Layeredw Width of the window
; Layeredh Height of the window
; Alpha Default = 255 : The transparency (0-255) to set the window transparency
;
; return If the function succeeds, the return value is nonzero
;
; notes If x or y omitted, then layered window will use its current coordinates
; If w or h omitted then current width and height will be used
UpdateLayeredWindow(hwnd, hdc, x="", y="", w="", h="", Alpha=255)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if ((x != "") && (y != ""))
VarSetCapacity(pt, 8), NumPut(x, pt, 0, "UInt"), NumPut(y, pt, 4, "UInt")
if (w = "") ||(h = "")
WinGetPos,,, w, h, ahk_id %hwnd%
return DllCall("UpdateLayeredWindow"
, Ptr, hwnd
, Ptr, 0
, Ptr, ((x = "") && (y = "")) ? 0 : &pt
, "int64*", w|h<<32
, Ptr, hdc
, "int64*", 0
, "uint", 0
, "UInt*", Alpha<<16|1<<24
, "uint", 2)
}
;#####################################################################################
; Function BitBlt
; Description The BitBlt function performs a bit-block transfer of the color data corresponding to a rectangle
; of pixels from the specified source device context into a destination device context.
;
; dDC handle to destination DC
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of the area to copy
; dh height of the area to copy
; sDC handle to source DC
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; Raster raster operation code
;
; return If the function succeeds, the return value is nonzero
;
; notes If no raster operation is specified, then SRCCOPY is used, which copies the source directly to the destination rectangle
;
; BLACKNESS = 0x00000042
; NOTSRCERASE = 0x001100A6
; NOTSRCCOPY = 0x00330008
; SRCERASE = 0x00440328
; DSTINVERT = 0x00550009
; PATINVERT = 0x005A0049
; SRCINVERT = 0x00660046
; SRCAND = 0x008800C6
; MERGEPAINT = 0x00BB0226
; MERGECOPY = 0x00C000CA
; SRCCOPY = 0x00CC0020
; SRCPAINT = 0x00EE0086
; PATCOPY = 0x00F00021
; PATPAINT = 0x00FB0A09
; WHITENESS = 0x00FF0062
; CAPTUREBLT = 0x40000000
; NOMIRRORBITMAP = 0x80000000
BitBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, Raster="")
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdi32\BitBlt"
, Ptr, dDC
, "int", dx
, "int", dy
, "int", dw
, "int", dh
, Ptr, sDC
, "int", sx
, "int", sy
, "uint", Raster ? Raster : 0x00CC0020)
}
;#####################################################################################
; Function StretchBlt
; Description The StretchBlt function copies a bitmap from a source rectangle into a destination rectangle,
; stretching or compressing the bitmap to fit the dimensions of the destination rectangle, if necessary.
; The system stretches or compresses the bitmap according to the stretching mode currently set in the destination device context.
;
; ddc handle to destination DC
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of destination rectangle
; dh height of destination rectangle
; sdc handle to source DC
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source rectangle
; sh height of source rectangle
; Raster raster operation code
;
; return If the function succeeds, the return value is nonzero
;
; notes If no raster operation is specified, then SRCCOPY is used. It uses the same raster operations as BitBlt
StretchBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, sw, sh, Raster="")
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdi32\StretchBlt"
, Ptr, ddc
, "int", dx
, "int", dy
, "int", dw
, "int", dh
, Ptr, sdc
, "int", sx
, "int", sy
, "int", sw
, "int", sh
, "uint", Raster ? Raster : 0x00CC0020)
}
;#####################################################################################
; Function SetStretchBltMode
; Description The SetStretchBltMode function sets the bitmap stretching mode in the specified device context
;
; hdc handle to the DC
; iStretchMode The stretching mode, describing how the target will be stretched
;
; return If the function succeeds, the return value is the previous stretching mode. If it fails it will return 0
;
; STRETCH_ANDSCANS = 0x01
; STRETCH_ORSCANS = 0x02
; STRETCH_DELETESCANS = 0x03
; STRETCH_HALFTONE = 0x04
SetStretchBltMode(hdc, iStretchMode=4)
{
return DllCall("gdi32\SetStretchBltMode"
, A_PtrSize ? "UPtr" : "UInt", hdc
, "int", iStretchMode)
}
;#####################################################################################
; Function SetImage
; Description Associates a new image with a static control
;
; hwnd handle of the control to update
; hBitmap a gdi bitmap to associate the static control with
;
; return If the function succeeds, the return value is nonzero
SetImage(hwnd, hBitmap)
{
SendMessage, 0x172, 0x0, hBitmap,, ahk_id %hwnd%
E := ErrorLevel
DeleteObject(E)
return E
}
;#####################################################################################
; Function SetSysColorToControl
; Description Sets a solid colour to a control
;
; hwnd handle of the control to update
; SysColor A system colour to set to the control
;
; return If the function succeeds, the return value is zero
;
; notes A control must have the 0xE style set to it so it is recognised as a bitmap
; By default SysColor=15 is used which is COLOR_3DFACE. This is the standard background for a control
;
; COLOR_3DDKSHADOW = 21
; COLOR_3DFACE = 15
; COLOR_3DHIGHLIGHT = 20
; COLOR_3DHILIGHT = 20
; COLOR_3DLIGHT = 22
; COLOR_3DSHADOW = 16
; COLOR_ACTIVEBORDER = 10
; COLOR_ACTIVECAPTION = 2
; COLOR_APPWORKSPACE = 12
; COLOR_BACKGROUND = 1
; COLOR_BTNFACE = 15
; COLOR_BTNHIGHLIGHT = 20
; COLOR_BTNHILIGHT = 20
; COLOR_BTNSHADOW = 16
; COLOR_BTNTEXT = 18
; COLOR_CAPTIONTEXT = 9
; COLOR_DESKTOP = 1
; COLOR_GRADIENTACTIVECAPTION = 27
; COLOR_GRADIENTINACTIVECAPTION = 28
; COLOR_GRAYTEXT = 17
; COLOR_HIGHLIGHT = 13
; COLOR_HIGHLIGHTTEXT = 14
; COLOR_HOTLIGHT = 26
; COLOR_INACTIVEBORDER = 11
; COLOR_INACTIVECAPTION = 3
; COLOR_INACTIVECAPTIONTEXT = 19
; COLOR_INFOBK = 24
; COLOR_INFOTEXT = 23
; COLOR_MENU = 4
; COLOR_MENUHILIGHT = 29
; COLOR_MENUBAR = 30
; COLOR_MENUTEXT = 7
; COLOR_SCROLLBAR = 0
; COLOR_WINDOW = 5
; COLOR_WINDOWFRAME = 6
; COLOR_WINDOWTEXT = 8
SetSysColorToControl(hwnd, SysColor=15)
{
WinGetPos,,, w, h, ahk_id %hwnd%
bc := DllCall("GetSysColor", "Int", SysColor, "UInt")
pBrushClear := Gdip_BrushCreateSolid(0xff000000 | (bc >> 16 | bc & 0xff00 | (bc & 0xff) << 16))
pBitmap := Gdip_CreateBitmap(w, h), G := Gdip_GraphicsFromImage(pBitmap)
Gdip_FillRectangle(G, pBrushClear, 0, 0, w, h)
hBitmap := Gdip_CreateHBITMAPFromBitmap(pBitmap)
SetImage(hwnd, hBitmap)
Gdip_DeleteBrush(pBrushClear)
Gdip_DeleteGraphics(G), Gdip_DisposeImage(pBitmap), DeleteObject(hBitmap)
return 0
}
;#####################################################################################
; Function Gdip_BitmapFromScreen
; Description Gets a gdi+ bitmap from the screen
;
; Screen 0 = All screens
; Any numerical value = Just that screen
; x|y|w|h = Take specific coordinates with a width and height
; Raster raster operation code
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
; -1: one or more of x,y,w,h not passed properly
;
; notes If no raster operation is specified, then SRCCOPY is used to the returned bitmap
Gdip_BitmapFromScreen(Screen=0, Raster="")
{
if (Screen = 0)
{
Sysget, x, 76
Sysget, y, 77
Sysget, w, 78
Sysget, h, 79
}
else if (SubStr(Screen, 1, 5) = "hwnd:")
{
Screen := SubStr(Screen, 6)
if !WinExist( "ahk_id " Screen)
return -2
WinGetPos,,, w, h, ahk_id %Screen%
x := y := 0
hhdc := GetDCEx(Screen, 3)
}
else if (Screen&1 != "")
{
Sysget, M, Monitor, %Screen%
x := MLeft, y := MTop, w := MRight-MLeft, h := MBottom-MTop
}
else
{
StringSplit, S, Screen, |
x := S1, y := S2, w := S3, h := S4
}
if (x = "") || (y = "") || (w = "") || (h = "")
return -1
chdc := CreateCompatibleDC(), hbm := CreateDIBSection(w, h, chdc), obm := SelectObject(chdc, hbm), hhdc := hhdc ? hhdc : GetDC()
BitBlt(chdc, 0, 0, w, h, hhdc, x, y, Raster)
ReleaseDC(hhdc)
pBitmap := Gdip_CreateBitmapFromHBITMAP(hbm)
SelectObject(chdc, obm), DeleteObject(hbm), DeleteDC(hhdc), DeleteDC(chdc)
return pBitmap
}
;#####################################################################################
; Function Gdip_BitmapFromHWND
; Description Uses PrintWindow to get a handle to the specified window and return a bitmap from it
;
; hwnd handle to the window to get a bitmap from
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
;
; notes Window must not be not minimised in order to get a handle to it's client area
Gdip_BitmapFromHWND(hwnd)
{
WinGetPos,,, Width, Height, ahk_id %hwnd%
hbm := CreateDIBSection(Width, Height), hdc := CreateCompatibleDC(), obm := SelectObject(hdc, hbm)
PrintWindow(hwnd, hdc)
pBitmap := Gdip_CreateBitmapFromHBITMAP(hbm)
SelectObject(hdc, obm), DeleteObject(hbm), DeleteDC(hdc)
return pBitmap
}
;#####################################################################################
; Function CreateRectF
; Description Creates a RectF object, containing a the coordinates and dimensions of a rectangle
;
; RectF Name to call the RectF object
; x x-coordinate of the upper left corner of the rectangle
; y y-coordinate of the upper left corner of the rectangle
; w Width of the rectangle
; h Height of the rectangle
;
; return No return value
CreateRectF(ByRef RectF, x, y, w, h)
{
VarSetCapacity(RectF, 16)
NumPut(x, RectF, 0, "float"), NumPut(y, RectF, 4, "float"), NumPut(w, RectF, 8, "float"), NumPut(h, RectF, 12, "float")
}
;#####################################################################################
; Function CreateRect
; Description Creates a Rect object, containing a the coordinates and dimensions of a rectangle
;
; RectF Name to call the RectF object
; x x-coordinate of the upper left corner of the rectangle
; y y-coordinate of the upper left corner of the rectangle
; w Width of the rectangle
; h Height of the rectangle
;
; return No return value
CreateRect(ByRef Rect, x, y, w, h)
{
VarSetCapacity(Rect, 16)
NumPut(x, Rect, 0, "uint"), NumPut(y, Rect, 4, "uint"), NumPut(w, Rect, 8, "uint"), NumPut(h, Rect, 12, "uint")
}
;#####################################################################################
; Function CreateSizeF
; Description Creates a SizeF object, containing an 2 values
;
; SizeF Name to call the SizeF object
; w w-value for the SizeF object
; h h-value for the SizeF object
;
; return No Return value
CreateSizeF(ByRef SizeF, w, h)
{
VarSetCapacity(SizeF, 8)
NumPut(w, SizeF, 0, "float"), NumPut(h, SizeF, 4, "float")
}
;#####################################################################################
; Function CreatePointF
; Description Creates a SizeF object, containing an 2 values
;
; SizeF Name to call the SizeF object
; w w-value for the SizeF object
; h h-value for the SizeF object
;
; return No Return value
CreatePointF(ByRef PointF, x, y)
{
VarSetCapacity(PointF, 8)
NumPut(x, PointF, 0, "float"), NumPut(y, PointF, 4, "float")
}
;#####################################################################################
; Function CreateDIBSection
; Description The CreateDIBSection function creates a DIB (Device Independent Bitmap) that applications can write to directly
;
; w width of the bitmap to create
; h height of the bitmap to create
; hdc a handle to the device context to use the palette from
; bpp bits per pixel (32 = ARGB)
; ppvBits A pointer to a variable that receives a pointer to the location of the DIB bit values
;
; return returns a DIB. A gdi bitmap
;
; notes ppvBits will receive the location of the pixels in the DIB
CreateDIBSection(w, h, hdc="", bpp=32, ByRef ppvBits=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
hdc2 := hdc ? hdc : GetDC()
VarSetCapacity(bi, 40, 0)
NumPut(w, bi, 4, "uint")
, NumPut(h, bi, 8, "uint")
, NumPut(40, bi, 0, "uint")
, NumPut(1, bi, 12, "ushort")
, NumPut(0, bi, 16, "uInt")
, NumPut(bpp, bi, 14, "ushort")
hbm := DllCall("CreateDIBSection"
, Ptr, hdc2
, Ptr, &bi
, "uint", 0
, A_PtrSize ? "UPtr*" : "uint*", ppvBits
, Ptr, 0
, "uint", 0, Ptr)
if !hdc
ReleaseDC(hdc2)
return hbm
}
;#####################################################################################
; Function PrintWindow
; Description The PrintWindow function copies a visual window into the specified device context (DC), typically a printer DC
;
; hwnd A handle to the window that will be copied
; hdc A handle to the device context
; Flags Drawing options
;
; return If the function succeeds, it returns a nonzero value
;
; PW_CLIENTONLY = 1
PrintWindow(hwnd, hdc, Flags=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("PrintWindow", Ptr, hwnd, Ptr, hdc, "uint", Flags)
}
;#####################################################################################
; Function DestroyIcon
; Description Destroys an icon and frees any memory the icon occupied
;
; hIcon Handle to the icon to be destroyed. The icon must not be in use
;
; return If the function succeeds, the return value is nonzero
DestroyIcon(hIcon)
{
return DllCall("DestroyIcon", A_PtrSize ? "UPtr" : "UInt", hIcon)
}
;#####################################################################################
PaintDesktop(hdc)
{
return DllCall("PaintDesktop", A_PtrSize ? "UPtr" : "UInt", hdc)
}
;#####################################################################################
CreateCompatibleBitmap(hdc, w, h)
{
return DllCall("gdi32\CreateCompatibleBitmap", A_PtrSize ? "UPtr" : "UInt", hdc, "int", w, "int", h)
}
;#####################################################################################
; Function CreateCompatibleDC
; Description This function creates a memory device context (DC) compatible with the specified device
;
; hdc Handle to an existing device context
;
; return returns the handle to a device context or 0 on failure
;
; notes If this handle is 0 (by default), the function creates a memory device context compatible with the application's current screen
CreateCompatibleDC(hdc=0)
{
return DllCall("CreateCompatibleDC", A_PtrSize ? "UPtr" : "UInt", hdc)
}
;#####################################################################################
; Function SelectObject
; Description The SelectObject function selects an object into the specified device context (DC). The new object replaces the previous object of the same type
;
; hdc Handle to a DC
; hgdiobj A handle to the object to be selected into the DC
;
; return If the selected object is not a region and the function succeeds, the return value is a handle to the object being replaced
;
; notes The specified object must have been created by using one of the following functions
; Bitmap - CreateBitmap, CreateBitmapIndirect, CreateCompatibleBitmap, CreateDIBitmap, CreateDIBSection (A single bitmap cannot be selected into more than one DC at the same time)
; Brush - CreateBrushIndirect, CreateDIBPatternBrush, CreateDIBPatternBrushPt, CreateHatchBrush, CreatePatternBrush, CreateSolidBrush
; Font - CreateFont, CreateFontIndirect
; Pen - CreatePen, CreatePenIndirect
; Region - CombineRgn, CreateEllipticRgn, CreateEllipticRgnIndirect, CreatePolygonRgn, CreateRectRgn, CreateRectRgnIndirect
;
; notes If the selected object is a region and the function succeeds, the return value is one of the following value
;
; SIMPLEREGION = 2 Region consists of a single rectangle
; COMPLEXREGION = 3 Region consists of more than one rectangle
; NULLREGION = 1 Region is empty
SelectObject(hdc, hgdiobj)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("SelectObject", Ptr, hdc, Ptr, hgdiobj)
}
;#####################################################################################
; Function DeleteObject
; Description This function deletes a logical pen, brush, font, bitmap, region, or palette, freeing all system resources associated with the object
; After the object is deleted, the specified handle is no longer valid
;
; hObject Handle to a logical pen, brush, font, bitmap, region, or palette to delete
;
; return Nonzero indicates success. Zero indicates that the specified handle is not valid or that the handle is currently selected into a device context
DeleteObject(hObject)
{
return DllCall("DeleteObject", A_PtrSize ? "UPtr" : "UInt", hObject)
}
;#####################################################################################
; Function GetDC
; Description This function retrieves a handle to a display device context (DC) for the client area of the specified window.
; The display device context can be used in subsequent graphics display interface (GDI) functions to draw in the client area of the window.
;
; hwnd Handle to the window whose device context is to be retrieved. If this value is NULL, GetDC retrieves the device context for the entire screen
;
; return The handle the device context for the specified window's client area indicates success. NULL indicates failure
GetDC(hwnd=0)
{
return DllCall("GetDC", A_PtrSize ? "UPtr" : "UInt", hwnd)
}
;#####################################################################################
; DCX_CACHE = 0x2
; DCX_CLIPCHILDREN = 0x8
; DCX_CLIPSIBLINGS = 0x10
; DCX_EXCLUDERGN = 0x40
; DCX_EXCLUDEUPDATE = 0x100
; DCX_INTERSECTRGN = 0x80
; DCX_INTERSECTUPDATE = 0x200
; DCX_LOCKWINDOWUPDATE = 0x400
; DCX_NORECOMPUTE = 0x100000
; DCX_NORESETATTRS = 0x4
; DCX_PARENTCLIP = 0x20
; DCX_VALIDATE = 0x200000
; DCX_WINDOW = 0x1
GetDCEx(hwnd, flags=0, hrgnClip=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("GetDCEx", Ptr, hwnd, Ptr, hrgnClip, "int", flags)
}
;#####################################################################################
; Function ReleaseDC
; Description This function releases a device context (DC), freeing it for use by other applications. The effect of ReleaseDC depends on the type of device context
;
; hdc Handle to the device context to be released
; hwnd Handle to the window whose device context is to be released
;
; return 1 = released
; 0 = not released
;
; notes The application must call the ReleaseDC function for each call to the GetWindowDC function and for each call to the GetDC function that retrieves a common device context
; An application cannot use the ReleaseDC function to release a device context that was created by calling the CreateDC function; instead, it must use the DeleteDC function.
ReleaseDC(hdc, hwnd=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("ReleaseDC", Ptr, hwnd, Ptr, hdc)
}
;#####################################################################################
; Function DeleteDC
; Description The DeleteDC function deletes the specified device context (DC)
;
; hdc A handle to the device context
;
; return If the function succeeds, the return value is nonzero
;
; notes An application must not delete a DC whose handle was obtained by calling the GetDC function. Instead, it must call the ReleaseDC function to free the DC
DeleteDC(hdc)
{
return DllCall("DeleteDC", A_PtrSize ? "UPtr" : "UInt", hdc)
}
;#####################################################################################
; Function Gdip_LibraryVersion
; Description Get the current library version
;
; return the library version
;
; notes This is useful for non compiled programs to ensure that a person doesn't run an old version when testing your scripts
Gdip_LibraryVersion()
{
return 1.45
}
;#####################################################################################
; Function Gdip_LibrarySubVersion
; Description Get the current library sub version
;
; return the library sub version
;
; notes This is the sub-version currently maintained by Rseding91
Gdip_LibrarySubVersion()
{
return 1.47
}
;#####################################################################################
; Function: Gdip_BitmapFromBRA
; Description: Gets a pointer to a gdi+ bitmap from a BRA file
;
; BRAFromMemIn The variable for a BRA file read to memory
; File The name of the file, or its number that you would like (This depends on alternate parameter)
; Alternate Changes whether the File parameter is the file name or its number
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
; -1 = The BRA variable is empty
; -2 = The BRA has an incorrect header
; -3 = The BRA has information missing
; -4 = Could not find file inside the BRA
Gdip_BitmapFromBRA(ByRef BRAFromMemIn, File, Alternate=0)
{
Static FName = "ObjRelease"
if !BRAFromMemIn
return -1
Loop, Parse, BRAFromMemIn, `n
{
if (A_Index = 1)
{
StringSplit, Header, A_LoopField, |
if (Header0 != 4 || Header2 != "BRA!")
return -2
}
else if (A_Index = 2)
{
StringSplit, Info, A_LoopField, |
if (Info0 != 3)
return -3
}
else
break
}
if !Alternate
StringReplace, File, File, \, \\, All
RegExMatch(BRAFromMemIn, "mi`n)^" (Alternate ? File "\|.+?\|(\d+)\|(\d+)" : "\d+\|" File "\|(\d+)\|(\d+)") "$", FileInfo)
if !FileInfo
return -4
hData := DllCall("GlobalAlloc", "uint", 2, Ptr, FileInfo2, Ptr)
pData := DllCall("GlobalLock", Ptr, hData, Ptr)
DllCall("RtlMoveMemory", Ptr, pData, Ptr, &BRAFromMemIn+Info2+FileInfo1, Ptr, FileInfo2)
DllCall("GlobalUnlock", Ptr, hData)
DllCall("ole32\CreateStreamOnHGlobal", Ptr, hData, "int", 1, A_PtrSize ? "UPtr*" : "UInt*", pStream)
DllCall("gdiplus\GdipCreateBitmapFromStream", Ptr, pStream, A_PtrSize ? "UPtr*" : "UInt*", pBitmap)
If (A_PtrSize)
%FName%(pStream)
Else
DllCall(NumGet(NumGet(1*pStream)+8), "uint", pStream)
return pBitmap
}
;#####################################################################################
; Function Gdip_DrawRectangle
; Description This function uses a pen to draw the outline of a rectangle into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rectangle
; y y-coordinate of the top left of the rectangle
; w width of the rectanlge
; h height of the rectangle
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawRectangle(pGraphics, pPen, x, y, w, h)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawRectangle", Ptr, pGraphics, Ptr, pPen, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_DrawRoundedRectangle
; Description This function uses a pen to draw the outline of a rounded rectangle into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rounded rectangle
; y y-coordinate of the top left of the rounded rectangle
; w width of the rectanlge
; h height of the rectangle
; r radius of the rounded corners
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawRoundedRectangle(pGraphics, pPen, x, y, w, h, r)
{
Gdip_SetClipRect(pGraphics, x-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x-r, y+h-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y+h-r, 2*r, 2*r, 4)
E := Gdip_DrawRectangle(pGraphics, pPen, x, y, w, h)
Gdip_ResetClip(pGraphics)
Gdip_SetClipRect(pGraphics, x-(2*r), y+r, w+(4*r), h-(2*r), 4)
Gdip_SetClipRect(pGraphics, x+r, y-(2*r), w-(2*r), h+(4*r), 4)
Gdip_DrawEllipse(pGraphics, pPen, x, y, 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x+w-(2*r), y, 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x, y+h-(2*r), 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x+w-(2*r), y+h-(2*r), 2*r, 2*r)
Gdip_ResetClip(pGraphics)
return E
}
;#####################################################################################
; Function Gdip_DrawEllipse
; Description This function uses a pen to draw the outline of an ellipse into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rectangle the ellipse will be drawn into
; y y-coordinate of the top left of the rectangle the ellipse will be drawn into
; w width of the ellipse
; h height of the ellipse
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawEllipse(pGraphics, pPen, x, y, w, h)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawEllipse", Ptr, pGraphics, Ptr, pPen, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_DrawBezier
; Description This function uses a pen to draw the outline of a bezier (a weighted curve) into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x1 x-coordinate of the start of the bezier
; y1 y-coordinate of the start of the bezier
; x2 x-coordinate of the first arc of the bezier
; y2 y-coordinate of the first arc of the bezier
; x3 x-coordinate of the second arc of the bezier
; y3 y-coordinate of the second arc of the bezier
; x4 x-coordinate of the end of the bezier
; y4 y-coordinate of the end of the bezier
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawBezier(pGraphics, pPen, x1, y1, x2, y2, x3, y3, x4, y4)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawBezier"
, Ptr, pgraphics
, Ptr, pPen
, "float", x1
, "float", y1
, "float", x2
, "float", y2
, "float", x3
, "float", y3
, "float", x4
, "float", y4)
}
;#####################################################################################
; Function Gdip_DrawArc
; Description This function uses a pen to draw the outline of an arc into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the start of the arc
; y y-coordinate of the start of the arc
; w width of the arc
; h height of the arc
; StartAngle specifies the angle between the x-axis and the starting point of the arc
; SweepAngle specifies the angle between the starting and ending points of the arc
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawArc(pGraphics, pPen, x, y, w, h, StartAngle, SweepAngle)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawArc"
, Ptr, pGraphics
, Ptr, pPen
, "float", x
, "float", y
, "float", w
, "float", h
, "float", StartAngle
, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_DrawPie
; Description This function uses a pen to draw the outline of a pie into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the start of the pie
; y y-coordinate of the start of the pie
; w width of the pie
; h height of the pie
; StartAngle specifies the angle between the x-axis and the starting point of the pie
; SweepAngle specifies the angle between the starting and ending points of the pie
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawPie(pGraphics, pPen, x, y, w, h, StartAngle, SweepAngle)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawPie", Ptr, pGraphics, Ptr, pPen, "float", x, "float", y, "float", w, "float", h, "float", StartAngle, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_DrawLine
; Description This function uses a pen to draw a line into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x1 x-coordinate of the start of the line
; y1 y-coordinate of the start of the line
; x2 x-coordinate of the end of the line
; y2 y-coordinate of the end of the line
;
; return status enumeration. 0 = success
Gdip_DrawLine(pGraphics, pPen, x1, y1, x2, y2)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipDrawLine"
, Ptr, pGraphics
, Ptr, pPen
, "float", x1
, "float", y1
, "float", x2
, "float", y2)
}
;#####################################################################################
; Function Gdip_DrawLines
; Description This function uses a pen to draw a series of joined lines into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; Points the coordinates of all the points passed as x1,y1|x2,y2|x3,y3.....
;
; return status enumeration. 0 = success
Gdip_DrawLines(pGraphics, pPen, Points)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipDrawLines", Ptr, pGraphics, Ptr, pPen, Ptr, &PointF, "int", Points0)
}
;#####################################################################################
; Function Gdip_FillRectangle
; Description This function uses a brush to fill a rectangle in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the rectangle
; y y-coordinate of the top left of the rectangle
; w width of the rectanlge
; h height of the rectangle
;
; return status enumeration. 0 = success
Gdip_FillRectangle(pGraphics, pBrush, x, y, w, h)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipFillRectangle"
, Ptr, pGraphics
, Ptr, pBrush
, "float", x
, "float", y
, "float", w
, "float", h)
}
;#####################################################################################
; Function Gdip_FillRoundedRectangle
; Description This function uses a brush to fill a rounded rectangle in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the rounded rectangle
; y y-coordinate of the top left of the rounded rectangle
; w width of the rectanlge
; h height of the rectangle
; r radius of the rounded corners
;
; return status enumeration. 0 = success
Gdip_FillRoundedRectangle(pGraphics, pBrush, x, y, w, h, r)
{
Region := Gdip_GetClipRegion(pGraphics)
Gdip_SetClipRect(pGraphics, x-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x-r, y+h-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y+h-r, 2*r, 2*r, 4)
E := Gdip_FillRectangle(pGraphics, pBrush, x, y, w, h)
Gdip_SetClipRegion(pGraphics, Region, 0)
Gdip_SetClipRect(pGraphics, x-(2*r), y+r, w+(4*r), h-(2*r), 4)
Gdip_SetClipRect(pGraphics, x+r, y-(2*r), w-(2*r), h+(4*r), 4)
Gdip_FillEllipse(pGraphics, pBrush, x, y, 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x+w-(2*r), y, 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x, y+h-(2*r), 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x+w-(2*r), y+h-(2*r), 2*r, 2*r)
Gdip_SetClipRegion(pGraphics, Region, 0)
Gdip_DeleteRegion(Region)
return E
}
;#####################################################################################
; Function Gdip_FillPolygon
; Description This function uses a brush to fill a polygon in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Points the coordinates of all the points passed as x1,y1|x2,y2|x3,y3.....
;
; return status enumeration. 0 = success
;
; notes Alternate will fill the polygon as a whole, wheras winding will fill each new "segment"
; Alternate = 0
; Winding = 1
Gdip_FillPolygon(pGraphics, pBrush, Points, FillMode=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipFillPolygon", Ptr, pGraphics, Ptr, pBrush, Ptr, &PointF, "int", Points0, "int", FillMode)
}
;#####################################################################################
; Function Gdip_FillPie
; Description This function uses a brush to fill a pie in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the pie
; y y-coordinate of the top left of the pie
; w width of the pie
; h height of the pie
; StartAngle specifies the angle between the x-axis and the starting point of the pie
; SweepAngle specifies the angle between the starting and ending points of the pie
;
; return status enumeration. 0 = success
Gdip_FillPie(pGraphics, pBrush, x, y, w, h, StartAngle, SweepAngle)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipFillPie"
, Ptr, pGraphics
, Ptr, pBrush
, "float", x
, "float", y
, "float", w
, "float", h
, "float", StartAngle
, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_FillEllipse
; Description This function uses a brush to fill an ellipse in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the ellipse
; y y-coordinate of the top left of the ellipse
; w width of the ellipse
; h height of the ellipse
;
; return status enumeration. 0 = success
Gdip_FillEllipse(pGraphics, pBrush, x, y, w, h)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipFillEllipse", Ptr, pGraphics, Ptr, pBrush, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_FillRegion
; Description This function uses a brush to fill a region in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Region Pointer to a Region
;
; return status enumeration. 0 = success
;
; notes You can create a region Gdip_CreateRegion() and then add to this
Gdip_FillRegion(pGraphics, pBrush, Region)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipFillRegion", Ptr, pGraphics, Ptr, pBrush, Ptr, Region)
}
;#####################################################################################
; Function Gdip_FillPath
; Description This function uses a brush to fill a path in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Region Pointer to a Path
;
; return status enumeration. 0 = success
Gdip_FillPath(pGraphics, pBrush, Path)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipFillPath", Ptr, pGraphics, Ptr, pBrush, Ptr, Path)
}
;#####################################################################################
; Function Gdip_DrawImagePointsRect
; Description This function draws a bitmap into the Graphics of another bitmap and skews it
;
; pGraphics Pointer to the Graphics of a bitmap
; pBitmap Pointer to a bitmap to be drawn
; Points Points passed as x1,y1|x2,y2|x3,y3 (3 points: top left, top right, bottom left) describing the drawing of the bitmap
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source rectangle
; sh height of source rectangle
; Matrix a matrix used to alter image attributes when drawing
;
; return status enumeration. 0 = success
;
; notes if sx,sy,sw,sh are missed then the entire source bitmap will be used
; Matrix can be omitted to just draw with no alteration to ARGB
; Matrix may be passed as a digit from 0 - 1 to change just transparency
; Matrix can be passed as a matrix with any delimiter
Gdip_DrawImagePointsRect(pGraphics, pBitmap, Points, sx="", sy="", sw="", sh="", Matrix=1)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
if (Matrix&1 = "")
ImageAttr := Gdip_SetImageAttributesColorMatrix(Matrix)
else if (Matrix != 1)
ImageAttr := Gdip_SetImageAttributesColorMatrix("1|0|0|0|0|0|1|0|0|0|0|0|1|0|0|0|0|0|" Matrix "|0|0|0|0|0|1")
if (sx = "" && sy = "" && sw = "" && sh = "")
{
sx := 0, sy := 0
sw := Gdip_GetImageWidth(pBitmap)
sh := Gdip_GetImageHeight(pBitmap)
}
E := DllCall("gdiplus\GdipDrawImagePointsRect"
, Ptr, pGraphics
, Ptr, pBitmap
, Ptr, &PointF
, "int", Points0
, "float", sx
, "float", sy
, "float", sw
, "float", sh
, "int", 2
, Ptr, ImageAttr
, Ptr, 0
, Ptr, 0)
if ImageAttr
Gdip_DisposeImageAttributes(ImageAttr)
return E
}
;#####################################################################################
; Function Gdip_DrawImage
; Description This function draws a bitmap into the Graphics of another bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBitmap Pointer to a bitmap to be drawn
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of destination image
; dh height of destination image
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source image
; sh height of source image
; Matrix a matrix used to alter image attributes when drawing
;
; return status enumeration. 0 = success
;
; notes if sx,sy,sw,sh are missed then the entire source bitmap will be used
; Gdip_DrawImage performs faster
; Matrix can be omitted to just draw with no alteration to ARGB
; Matrix may be passed as a digit from 0 - 1 to change just transparency
; Matrix can be passed as a matrix with any delimiter. For example:
; MatrixBright=
; (
; 1.5 |0 |0 |0 |0
; 0 |1.5 |0 |0 |0
; 0 |0 |1.5 |0 |0
; 0 |0 |0 |1 |0
; 0.05 |0.05 |0.05 |0 |1
; )
;
; notes MatrixBright = 1.5|0|0|0|0|0|1.5|0|0|0|0|0|1.5|0|0|0|0|0|1|0|0.05|0.05|0.05|0|1
; MatrixGreyScale = 0.299|0.299|0.299|0|0|0.587|0.587|0.587|0|0|0.114|0.114|0.114|0|0|0|0|0|1|0|0|0|0|0|1
; MatrixNegative = -1|0|0|0|0|0|-1|0|0|0|0|0|-1|0|0|0|0|0|1|0|0|0|0|0|1
Gdip_DrawImage(pGraphics, pBitmap, dx="", dy="", dw="", dh="", sx="", sy="", sw="", sh="", Matrix=1)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if (Matrix&1 = "")
ImageAttr := Gdip_SetImageAttributesColorMatrix(Matrix)
else if (Matrix != 1)
ImageAttr := Gdip_SetImageAttributesColorMatrix("1|0|0|0|0|0|1|0|0|0|0|0|1|0|0|0|0|0|" Matrix "|0|0|0|0|0|1")
if (sx = "" && sy = "" && sw = "" && sh = "")
{
if (dx = "" && dy = "" && dw = "" && dh = "")
{
sx := dx := 0, sy := dy := 0
sw := dw := Gdip_GetImageWidth(pBitmap)
sh := dh := Gdip_GetImageHeight(pBitmap)
}
else
{
sx := sy := 0
sw := Gdip_GetImageWidth(pBitmap)
sh := Gdip_GetImageHeight(pBitmap)
}
}
E := DllCall("gdiplus\GdipDrawImageRectRect"
, Ptr, pGraphics
, Ptr, pBitmap
, "float", dx
, "float", dy
, "float", dw
, "float", dh
, "float", sx
, "float", sy
, "float", sw
, "float", sh
, "int", 2
, Ptr, ImageAttr
, Ptr, 0
, Ptr, 0)
if ImageAttr
Gdip_DisposeImageAttributes(ImageAttr)
return E
}
;#####################################################################################
; Function Gdip_SetImageAttributesColorMatrix
; Description This function creates an image matrix ready for drawing
;
; Matrix a matrix used to alter image attributes when drawing
; passed with any delimeter
;
; return returns an image matrix on sucess or 0 if it fails
;
; notes MatrixBright = 1.5|0|0|0|0|0|1.5|0|0|0|0|0|1.5|0|0|0|0|0|1|0|0.05|0.05|0.05|0|1
; MatrixGreyScale = 0.299|0.299|0.299|0|0|0.587|0.587|0.587|0|0|0.114|0.114|0.114|0|0|0|0|0|1|0|0|0|0|0|1
; MatrixNegative = -1|0|0|0|0|0|-1|0|0|0|0|0|-1|0|0|0|0|0|1|0|0|0|0|0|1
Gdip_SetImageAttributesColorMatrix(Matrix)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
VarSetCapacity(ColourMatrix, 100, 0)
Matrix := RegExReplace(RegExReplace(Matrix, "^[^\d-\.]+([\d\.])", "$1", "", 1), "[^\d-\.]+", "|")
StringSplit, Matrix, Matrix, |
Loop, 25
{
Matrix := (Matrix%A_Index% != "") ? Matrix%A_Index% : Mod(A_Index-1, 6) ? 0 : 1
NumPut(Matrix, ColourMatrix, (A_Index-1)*4, "float")
}
DllCall("gdiplus\GdipCreateImageAttributes", A_PtrSize ? "UPtr*" : "uint*", ImageAttr)
DllCall("gdiplus\GdipSetImageAttributesColorMatrix", Ptr, ImageAttr, "int", 1, "int", 1, Ptr, &ColourMatrix, Ptr, 0, "int", 0)
return ImageAttr
}
;#####################################################################################
; Function Gdip_GraphicsFromImage
; Description This function gets the graphics for a bitmap used for drawing functions
;
; pBitmap Pointer to a bitmap to get the pointer to its graphics
;
; return returns a pointer to the graphics of a bitmap
;
; notes a bitmap can be drawn into the graphics of another bitmap
Gdip_GraphicsFromImage(pBitmap)
{
DllCall("gdiplus\GdipGetImageGraphicsContext", A_PtrSize ? "UPtr" : "UInt", pBitmap, A_PtrSize ? "UPtr*" : "UInt*", pGraphics)
return pGraphics
}
;#####################################################################################
; Function Gdip_GraphicsFromHDC
; Description This function gets the graphics from the handle to a device context
;
; hdc This is the handle to the device context
;
; return returns a pointer to the graphics of a bitmap
;
; notes You can draw a bitmap into the graphics of another bitmap
Gdip_GraphicsFromHDC(hdc)
{
DllCall("gdiplus\GdipCreateFromHDC", A_PtrSize ? "UPtr" : "UInt", hdc, A_PtrSize ? "UPtr*" : "UInt*", pGraphics)
return pGraphics
}
;#####################################################################################
; Function Gdip_GetDC
; Description This function gets the device context of the passed Graphics
;
; hdc This is the handle to the device context
;
; return returns the device context for the graphics of a bitmap
Gdip_GetDC(pGraphics)
{
DllCall("gdiplus\GdipGetDC", A_PtrSize ? "UPtr" : "UInt", pGraphics, A_PtrSize ? "UPtr*" : "UInt*", hdc)
return hdc
}
;#####################################################################################
; Function Gdip_ReleaseDC
; Description This function releases a device context from use for further use
;
; pGraphics Pointer to the graphics of a bitmap
; hdc This is the handle to the device context
;
; return status enumeration. 0 = success
Gdip_ReleaseDC(pGraphics, hdc)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipReleaseDC", Ptr, pGraphics, Ptr, hdc)
}
;#####################################################################################
; Function Gdip_GraphicsClear
; Description Clears the graphics of a bitmap ready for further drawing
;
; pGraphics Pointer to the graphics of a bitmap
; ARGB The colour to clear the graphics to
;
; return status enumeration. 0 = success
;
; notes By default this will make the background invisible
; Using clipping regions you can clear a particular area on the graphics rather than clearing the entire graphics
Gdip_GraphicsClear(pGraphics, ARGB=0x00ffffff)
{
return DllCall("gdiplus\GdipGraphicsClear", A_PtrSize ? "UPtr" : "UInt", pGraphics, "int", ARGB)
}
;#####################################################################################
; Function Gdip_BlurBitmap
; Description Gives a pointer to a blurred bitmap from a pointer to a bitmap
;
; pBitmap Pointer to a bitmap to be blurred
; Blur The Amount to blur a bitmap by from 1 (least blur) to 100 (most blur)
;
; return If the function succeeds, the return value is a pointer to the new blurred bitmap
; -1 = The blur parameter is outside the range 1-100
;
; notes This function will not dispose of the original bitmap
Gdip_BlurBitmap(pBitmap, Blur)
{
if (Blur > 100) || (Blur < 1)
return -1
sWidth := Gdip_GetImageWidth(pBitmap), sHeight := Gdip_GetImageHeight(pBitmap)
dWidth := sWidth//Blur, dHeight := sHeight//Blur
pBitmap1 := Gdip_CreateBitmap(dWidth, dHeight)
G1 := Gdip_GraphicsFromImage(pBitmap1)
Gdip_SetInterpolationMode(G1, 7)
Gdip_DrawImage(G1, pBitmap, 0, 0, dWidth, dHeight, 0, 0, sWidth, sHeight)
Gdip_DeleteGraphics(G1)
pBitmap2 := Gdip_CreateBitmap(sWidth, sHeight)
G2 := Gdip_GraphicsFromImage(pBitmap2)
Gdip_SetInterpolationMode(G2, 7)
Gdip_DrawImage(G2, pBitmap1, 0, 0, sWidth, sHeight, 0, 0, dWidth, dHeight)
Gdip_DeleteGraphics(G2)
Gdip_DisposeImage(pBitmap1)
return pBitmap2
}
;#####################################################################################
; Function: Gdip_SaveBitmapToFile
; Description: Saves a bitmap to a file in any supported format onto disk
;
; pBitmap Pointer to a bitmap
; sOutput The name of the file that the bitmap will be saved to. Supported extensions are: .BMP,.DIB,.RLE,.JPG,.JPEG,.JPE,.JFIF,.GIF,.TIF,.TIFF,.PNG
; Quality If saving as jpg (.JPG,.JPEG,.JPE,.JFIF) then quality can be 1-100 with default at maximum quality
;
; return If the function succeeds, the return value is zero, otherwise:
; -1 = Extension supplied is not a supported file format
; -2 = Could not get a list of encoders on system
; -3 = Could not find matching encoder for specified file format
; -4 = Could not get WideChar name of output file
; -5 = Could not save file to disk
;
; notes This function will use the extension supplied from the sOutput parameter to determine the output format
Gdip_SaveBitmapToFile(pBitmap, sOutput, Quality=75)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
SplitPath, sOutput,,, Extension
if Extension not in BMP,DIB,RLE,JPG,JPEG,JPE,JFIF,GIF,TIF,TIFF,PNG
return -1
Extension := "." Extension
DllCall("gdiplus\GdipGetImageEncodersSize", "uint*", nCount, "uint*", nSize)
VarSetCapacity(ci, nSize)
DllCall("gdiplus\GdipGetImageEncoders", "uint", nCount, "uint", nSize, Ptr, &ci)
if !(nCount && nSize)
return -2
If (A_IsUnicode){
StrGet_Name := "StrGet"
Loop, %nCount%
{
sString := %StrGet_Name%(NumGet(ci, (idx := (48+7*A_PtrSize)*(A_Index-1))+32+3*A_PtrSize), "UTF-16")
if !InStr(sString, "*" Extension)
continue
pCodec := &ci+idx
break
}
} else {
Loop, %nCount%
{
Location := NumGet(ci, 76*(A_Index-1)+44)
nSize := DllCall("WideCharToMultiByte", "uint", 0, "uint", 0, "uint", Location, "int", -1, "uint", 0, "int", 0, "uint", 0, "uint", 0)
VarSetCapacity(sString, nSize)
DllCall("WideCharToMultiByte", "uint", 0, "uint", 0, "uint", Location, "int", -1, "str", sString, "int", nSize, "uint", 0, "uint", 0)
if !InStr(sString, "*" Extension)
continue
pCodec := &ci+76*(A_Index-1)
break
}
}
if !pCodec
return -3
if (Quality != 75)
{
Quality := (Quality < 0) ? 0 : (Quality > 100) ? 100 : Quality
if Extension in .JPG,.JPEG,.JPE,.JFIF
{
DllCall("gdiplus\GdipGetEncoderParameterListSize", Ptr, pBitmap, Ptr, pCodec, "uint*", nSize)
VarSetCapacity(EncoderParameters, nSize, 0)
DllCall("gdiplus\GdipGetEncoderParameterList", Ptr, pBitmap, Ptr, pCodec, "uint", nSize, Ptr, &EncoderParameters)
Loop, % NumGet(EncoderParameters, "UInt") ;%
{
elem := (24+(A_PtrSize ? A_PtrSize : 4))*(A_Index-1) + 4 + (pad := A_PtrSize = 8 ? 4 : 0)
if (NumGet(EncoderParameters, elem+16, "UInt") = 1) && (NumGet(EncoderParameters, elem+20, "UInt") = 6)
{
p := elem+&EncoderParameters-pad-4
NumPut(Quality, NumGet(NumPut(4, NumPut(1, p+0)+20, "UInt")), "UInt")
break
}
}
}
}
if (!A_IsUnicode)
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sOutput, "int", -1, Ptr, 0, "int", 0)
VarSetCapacity(wOutput, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sOutput, "int", -1, Ptr, &wOutput, "int", nSize)
VarSetCapacity(wOutput, -1)
if !VarSetCapacity(wOutput)
return -4
E := DllCall("gdiplus\GdipSaveImageToFile", Ptr, pBitmap, Ptr, &wOutput, Ptr, pCodec, "uint", p ? p : 0)
}
else
E := DllCall("gdiplus\GdipSaveImageToFile", Ptr, pBitmap, Ptr, &sOutput, Ptr, pCodec, "uint", p ? p : 0)
return E ? -5 : 0
}
;#####################################################################################
; Function Gdip_GetPixel
; Description Gets the ARGB of a pixel in a bitmap
;
; pBitmap Pointer to a bitmap
; x x-coordinate of the pixel
; y y-coordinate of the pixel
;
; return Returns the ARGB value of the pixel
Gdip_GetPixel(pBitmap, x, y)
{
DllCall("gdiplus\GdipBitmapGetPixel", A_PtrSize ? "UPtr" : "UInt", pBitmap, "int", x, "int", y, "uint*", ARGB)
return ARGB
}
;#####################################################################################
; Function Gdip_SetPixel
; Description Sets the ARGB of a pixel in a bitmap
;
; pBitmap Pointer to a bitmap
; x x-coordinate of the pixel
; y y-coordinate of the pixel
;
; return status enumeration. 0 = success
Gdip_SetPixel(pBitmap, x, y, ARGB)
{
return DllCall("gdiplus\GdipBitmapSetPixel", A_PtrSize ? "UPtr" : "UInt", pBitmap, "int", x, "int", y, "int", ARGB)
}
;#####################################################################################
; Function Gdip_GetImageWidth
; Description Gives the width of a bitmap
;
; pBitmap Pointer to a bitmap
;
; return Returns the width in pixels of the supplied bitmap
Gdip_GetImageWidth(pBitmap)
{
DllCall("gdiplus\GdipGetImageWidth", A_PtrSize ? "UPtr" : "UInt", pBitmap, "uint*", Width)
return Width
}
;#####################################################################################
; Function Gdip_GetImageHeight
; Description Gives the height of a bitmap
;
; pBitmap Pointer to a bitmap
;
; return Returns the height in pixels of the supplied bitmap
Gdip_GetImageHeight(pBitmap)
{
DllCall("gdiplus\GdipGetImageHeight", A_PtrSize ? "UPtr" : "UInt", pBitmap, "uint*", Height)
return Height
}
;#####################################################################################
; Function Gdip_GetDimensions
; Description Gives the width and height of a bitmap
;
; pBitmap Pointer to a bitmap
; Width ByRef variable. This variable will be set to the width of the bitmap
; Height ByRef variable. This variable will be set to the height of the bitmap
;
; return No return value
; Gdip_GetDimensions(pBitmap, ThisWidth, ThisHeight) will set ThisWidth to the width and ThisHeight to the height
Gdip_GetImageDimensions(pBitmap, ByRef Width, ByRef Height)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
DllCall("gdiplus\GdipGetImageWidth", Ptr, pBitmap, "uint*", Width)
DllCall("gdiplus\GdipGetImageHeight", Ptr, pBitmap, "uint*", Height)
}
;#####################################################################################
Gdip_GetDimensions(pBitmap, ByRef Width, ByRef Height)
{
Gdip_GetImageDimensions(pBitmap, Width, Height)
}
;#####################################################################################
Gdip_GetImagePixelFormat(pBitmap)
{
DllCall("gdiplus\GdipGetImagePixelFormat", A_PtrSize ? "UPtr" : "UInt", pBitmap, A_PtrSize ? "UPtr*" : "UInt*", Format)
return Format
}
;#####################################################################################
; Function Gdip_GetDpiX
; Description Gives the horizontal dots per inch of the graphics of a bitmap
;
; pBitmap Pointer to a bitmap
; Width ByRef variable. This variable will be set to the width of the bitmap
; Height ByRef variable. This variable will be set to the height of the bitmap
;
; return No return value
; Gdip_GetDimensions(pBitmap, ThisWidth, ThisHeight) will set ThisWidth to the width and ThisHeight to the height
Gdip_GetDpiX(pGraphics)
{
DllCall("gdiplus\GdipGetDpiX", A_PtrSize ? "UPtr" : "uint", pGraphics, "float*", dpix)
return Round(dpix)
}
;#####################################################################################
Gdip_GetDpiY(pGraphics)
{
DllCall("gdiplus\GdipGetDpiY", A_PtrSize ? "UPtr" : "uint", pGraphics, "float*", dpiy)
return Round(dpiy)
}
;#####################################################################################
Gdip_GetImageHorizontalResolution(pBitmap)
{
DllCall("gdiplus\GdipGetImageHorizontalResolution", A_PtrSize ? "UPtr" : "uint", pBitmap, "float*", dpix)
return Round(dpix)
}
;#####################################################################################
Gdip_GetImageVerticalResolution(pBitmap)
{
DllCall("gdiplus\GdipGetImageVerticalResolution", A_PtrSize ? "UPtr" : "uint", pBitmap, "float*", dpiy)
return Round(dpiy)
}
;#####################################################################################
Gdip_BitmapSetResolution(pBitmap, dpix, dpiy)
{
return DllCall("gdiplus\GdipBitmapSetResolution", A_PtrSize ? "UPtr" : "uint", pBitmap, "float", dpix, "float", dpiy)
}
;#####################################################################################
Gdip_CreateBitmapFromFile(sFile, IconNumber=1, IconSize="")
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
, PtrA := A_PtrSize ? "UPtr*" : "UInt*"
SplitPath, sFile,,, ext
if ext in exe,dll
{
Sizes := IconSize ? IconSize : 256 "|" 128 "|" 64 "|" 48 "|" 32 "|" 16
BufSize := 16 + (2*(A_PtrSize ? A_PtrSize : 4))
VarSetCapacity(buf, BufSize, 0)
Loop, Parse, Sizes, |
{
DllCall("PrivateExtractIcons", "str", sFile, "int", IconNumber-1, "int", A_LoopField, "int", A_LoopField, PtrA, hIcon, PtrA, 0, "uint", 1, "uint", 0)
if !hIcon
continue
if !DllCall("GetIconInfo", Ptr, hIcon, Ptr, &buf)
{
DestroyIcon(hIcon)
continue
}
hbmMask := NumGet(buf, 12 + ((A_PtrSize ? A_PtrSize : 4) - 4))
hbmColor := NumGet(buf, 12 + ((A_PtrSize ? A_PtrSize : 4) - 4) + (A_PtrSize ? A_PtrSize : 4))
if !(hbmColor && DllCall("GetObject", Ptr, hbmColor, "int", BufSize, Ptr, &buf))
{
DestroyIcon(hIcon)
continue
}
break
}
if !hIcon
return -1
Width := NumGet(buf, 4, "int"), Height := NumGet(buf, 8, "int")
hbm := CreateDIBSection(Width, -Height), hdc := CreateCompatibleDC(), obm := SelectObject(hdc, hbm)
if !DllCall("DrawIconEx", Ptr, hdc, "int", 0, "int", 0, Ptr, hIcon, "uint", Width, "uint", Height, "uint", 0, Ptr, 0, "uint", 3)
{
DestroyIcon(hIcon)
return -2
}
VarSetCapacity(dib, 104)
DllCall("GetObject", Ptr, hbm, "int", A_PtrSize = 8 ? 104 : 84, Ptr, &dib) ; sizeof(DIBSECTION) = 76+2*(A_PtrSize=8?4:0)+2*A_PtrSize
Stride := NumGet(dib, 12, "Int"), Bits := NumGet(dib, 20 + (A_PtrSize = 8 ? 4 : 0)) ; padding
DllCall("gdiplus\GdipCreateBitmapFromScan0", "int", Width, "int", Height, "int", Stride, "int", 0x26200A, Ptr, Bits, PtrA, pBitmapOld)
pBitmap := Gdip_CreateBitmap(Width, Height)
G := Gdip_GraphicsFromImage(pBitmap)
, Gdip_DrawImage(G, pBitmapOld, 0, 0, Width, Height, 0, 0, Width, Height)
SelectObject(hdc, obm), DeleteObject(hbm), DeleteDC(hdc)
Gdip_DeleteGraphics(G), Gdip_DisposeImage(pBitmapOld)
DestroyIcon(hIcon)
}
else
{
if (!A_IsUnicode)
{
VarSetCapacity(wFile, 1024)
DllCall("kernel32\MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sFile, "int", -1, Ptr, &wFile, "int", 512)
DllCall("gdiplus\GdipCreateBitmapFromFile", Ptr, &wFile, PtrA, pBitmap)
}
else
DllCall("gdiplus\GdipCreateBitmapFromFile", Ptr, &sFile, PtrA, pBitmap)
}
return pBitmap
}
;#####################################################################################
Gdip_CreateBitmapFromHBITMAP(hBitmap, Palette=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
DllCall("gdiplus\GdipCreateBitmapFromHBITMAP", Ptr, hBitmap, Ptr, Palette, A_PtrSize ? "UPtr*" : "uint*", pBitmap)
return pBitmap
}
;#####################################################################################
Gdip_CreateHBITMAPFromBitmap(pBitmap, Background=0xffffffff)
{
DllCall("gdiplus\GdipCreateHBITMAPFromBitmap", A_PtrSize ? "UPtr" : "UInt", pBitmap, A_PtrSize ? "UPtr*" : "uint*", hbm, "int", Background)
return hbm
}
;#####################################################################################
Gdip_CreateBitmapFromHICON(hIcon)
{
DllCall("gdiplus\GdipCreateBitmapFromHICON", A_PtrSize ? "UPtr" : "UInt", hIcon, A_PtrSize ? "UPtr*" : "uint*", pBitmap)
return pBitmap
}
;#####################################################################################
Gdip_CreateHICONFromBitmap(pBitmap)
{
DllCall("gdiplus\GdipCreateHICONFromBitmap", A_PtrSize ? "UPtr" : "UInt", pBitmap, A_PtrSize ? "UPtr*" : "uint*", hIcon)
return hIcon
}
;#####################################################################################
Gdip_CreateBitmap(Width, Height, Format=0x26200A)
{
DllCall("gdiplus\GdipCreateBitmapFromScan0", "int", Width, "int", Height, "int", 0, "int", Format, A_PtrSize ? "UPtr" : "UInt", 0, A_PtrSize ? "UPtr*" : "uint*", pBitmap)
Return pBitmap
}
;#####################################################################################
Gdip_CreateBitmapFromClipboard()
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if !DllCall("OpenClipboard", Ptr, 0)
return -1
if !DllCall("IsClipboardFormatAvailable", "uint", 8)
return -2
if !hBitmap := DllCall("GetClipboardData", "uint", 2, Ptr)
return -3
if !pBitmap := Gdip_CreateBitmapFromHBITMAP(hBitmap)
return -4
if !DllCall("CloseClipboard")
return -5
DeleteObject(hBitmap)
return pBitmap
}
;#####################################################################################
Gdip_SetBitmapToClipboard(pBitmap)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
off1 := A_PtrSize = 8 ? 52 : 44, off2 := A_PtrSize = 8 ? 32 : 24
hBitmap := Gdip_CreateHBITMAPFromBitmap(pBitmap)
DllCall("GetObject", Ptr, hBitmap, "int", VarSetCapacity(oi, A_PtrSize = 8 ? 104 : 84, 0), Ptr, &oi)
hdib := DllCall("GlobalAlloc", "uint", 2, Ptr, 40+NumGet(oi, off1, "UInt"), Ptr)
pdib := DllCall("GlobalLock", Ptr, hdib, Ptr)
DllCall("RtlMoveMemory", Ptr, pdib, Ptr, &oi+off2, Ptr, 40)
DllCall("RtlMoveMemory", Ptr, pdib+40, Ptr, NumGet(oi, off2 - (A_PtrSize ? A_PtrSize : 4), Ptr), Ptr, NumGet(oi, off1, "UInt"))
DllCall("GlobalUnlock", Ptr, hdib)
DllCall("DeleteObject", Ptr, hBitmap)
DllCall("OpenClipboard", Ptr, 0)
DllCall("EmptyClipboard")
DllCall("SetClipboardData", "uint", 8, Ptr, hdib)
DllCall("CloseClipboard")
}
;#####################################################################################
Gdip_CloneBitmapArea(pBitmap, x, y, w, h, Format=0x26200A)
{
DllCall("gdiplus\GdipCloneBitmapArea"
, "float", x
, "float", y
, "float", w
, "float", h
, "int", Format
, A_PtrSize ? "UPtr" : "UInt", pBitmap
, A_PtrSize ? "UPtr*" : "UInt*", pBitmapDest)
return pBitmapDest
}
;#####################################################################################
; Create resources
;#####################################################################################
Gdip_CreatePen(ARGB, w)
{
DllCall("gdiplus\GdipCreatePen1", "UInt", ARGB, "float", w, "int", 2, A_PtrSize ? "UPtr*" : "UInt*", pPen)
return pPen
}
;#####################################################################################
Gdip_CreatePenFromBrush(pBrush, w)
{
DllCall("gdiplus\GdipCreatePen2", A_PtrSize ? "UPtr" : "UInt", pBrush, "float", w, "int", 2, A_PtrSize ? "UPtr*" : "UInt*", pPen)
return pPen
}
;#####################################################################################
Gdip_BrushCreateSolid(ARGB=0xff000000)
{
DllCall("gdiplus\GdipCreateSolidFill", "UInt", ARGB, A_PtrSize ? "UPtr*" : "UInt*", pBrush)
return pBrush
}
;#####################################################################################
; HatchStyleHorizontal = 0
; HatchStyleVertical = 1
; HatchStyleForwardDiagonal = 2
; HatchStyleBackwardDiagonal = 3
; HatchStyleCross = 4
; HatchStyleDiagonalCross = 5
; HatchStyle05Percent = 6
; HatchStyle10Percent = 7
; HatchStyle20Percent = 8
; HatchStyle25Percent = 9
; HatchStyle30Percent = 10
; HatchStyle40Percent = 11
; HatchStyle50Percent = 12
; HatchStyle60Percent = 13
; HatchStyle70Percent = 14
; HatchStyle75Percent = 15
; HatchStyle80Percent = 16
; HatchStyle90Percent = 17
; HatchStyleLightDownwardDiagonal = 18
; HatchStyleLightUpwardDiagonal = 19
; HatchStyleDarkDownwardDiagonal = 20
; HatchStyleDarkUpwardDiagonal = 21
; HatchStyleWideDownwardDiagonal = 22
; HatchStyleWideUpwardDiagonal = 23
; HatchStyleLightVertical = 24
; HatchStyleLightHorizontal = 25
; HatchStyleNarrowVertical = 26
; HatchStyleNarrowHorizontal = 27
; HatchStyleDarkVertical = 28
; HatchStyleDarkHorizontal = 29
; HatchStyleDashedDownwardDiagonal = 30
; HatchStyleDashedUpwardDiagonal = 31
; HatchStyleDashedHorizontal = 32
; HatchStyleDashedVertical = 33
; HatchStyleSmallConfetti = 34
; HatchStyleLargeConfetti = 35
; HatchStyleZigZag = 36
; HatchStyleWave = 37
; HatchStyleDiagonalBrick = 38
; HatchStyleHorizontalBrick = 39
; HatchStyleWeave = 40
; HatchStylePlaid = 41
; HatchStyleDivot = 42
; HatchStyleDottedGrid = 43
; HatchStyleDottedDiamond = 44
; HatchStyleShingle = 45
; HatchStyleTrellis = 46
; HatchStyleSphere = 47
; HatchStyleSmallGrid = 48
; HatchStyleSmallCheckerBoard = 49
; HatchStyleLargeCheckerBoard = 50
; HatchStyleOutlinedDiamond = 51
; HatchStyleSolidDiamond = 52
; HatchStyleTotal = 53
Gdip_BrushCreateHatch(ARGBfront, ARGBback, HatchStyle=0)
{
DllCall("gdiplus\GdipCreateHatchBrush", "int", HatchStyle, "UInt", ARGBfront, "UInt", ARGBback, A_PtrSize ? "UPtr*" : "UInt*", pBrush)
return pBrush
}
;#####################################################################################
Gdip_CreateTextureBrush(pBitmap, WrapMode=1, x=0, y=0, w="", h="")
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
, PtrA := A_PtrSize ? "UPtr*" : "UInt*"
if !(w && h)
DllCall("gdiplus\GdipCreateTexture", Ptr, pBitmap, "int", WrapMode, PtrA, pBrush)
else
DllCall("gdiplus\GdipCreateTexture2", Ptr, pBitmap, "int", WrapMode, "float", x, "float", y, "float", w, "float", h, PtrA, pBrush)
return pBrush
}
;#####################################################################################
; WrapModeTile = 0
; WrapModeTileFlipX = 1
; WrapModeTileFlipY = 2
; WrapModeTileFlipXY = 3
; WrapModeClamp = 4
Gdip_CreateLineBrush(x1, y1, x2, y2, ARGB1, ARGB2, WrapMode=1)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
CreatePointF(PointF1, x1, y1), CreatePointF(PointF2, x2, y2)
DllCall("gdiplus\GdipCreateLineBrush", Ptr, &PointF1, Ptr, &PointF2, "Uint", ARGB1, "Uint", ARGB2, "int", WrapMode, A_PtrSize ? "UPtr*" : "UInt*", LGpBrush)
return LGpBrush
}
;#####################################################################################
; LinearGradientModeHorizontal = 0
; LinearGradientModeVertical = 1
; LinearGradientModeForwardDiagonal = 2
; LinearGradientModeBackwardDiagonal = 3
Gdip_CreateLineBrushFromRect(x, y, w, h, ARGB1, ARGB2, LinearGradientMode=1, WrapMode=1)
{
CreateRectF(RectF, x, y, w, h)
DllCall("gdiplus\GdipCreateLineBrushFromRect", A_PtrSize ? "UPtr" : "UInt", &RectF, "int", ARGB1, "int", ARGB2, "int", LinearGradientMode, "int", WrapMode, A_PtrSize ? "UPtr*" : "UInt*", LGpBrush)
return LGpBrush
}
;#####################################################################################
Gdip_CloneBrush(pBrush)
{
DllCall("gdiplus\GdipCloneBrush", A_PtrSize ? "UPtr" : "UInt", pBrush, A_PtrSize ? "UPtr*" : "UInt*", pBrushClone)
return pBrushClone
}
;#####################################################################################
; Delete resources
;#####################################################################################
Gdip_DeletePen(pPen)
{
return DllCall("gdiplus\GdipDeletePen", A_PtrSize ? "UPtr" : "UInt", pPen)
}
;#####################################################################################
Gdip_DeleteBrush(pBrush)
{
return DllCall("gdiplus\GdipDeleteBrush", A_PtrSize ? "UPtr" : "UInt", pBrush)
}
;#####################################################################################
Gdip_DisposeImage(pBitmap)
{
return DllCall("gdiplus\GdipDisposeImage", A_PtrSize ? "UPtr" : "UInt", pBitmap)
}
;#####################################################################################
Gdip_DeleteGraphics(pGraphics)
{
return DllCall("gdiplus\GdipDeleteGraphics", A_PtrSize ? "UPtr" : "UInt", pGraphics)
}
;#####################################################################################
Gdip_DisposeImageAttributes(ImageAttr)
{
return DllCall("gdiplus\GdipDisposeImageAttributes", A_PtrSize ? "UPtr" : "UInt", ImageAttr)
}
;#####################################################################################
Gdip_DeleteFont(hFont)
{
return DllCall("gdiplus\GdipDeleteFont", A_PtrSize ? "UPtr" : "UInt", hFont)
}
;#####################################################################################
Gdip_DeleteStringFormat(hFormat)
{
return DllCall("gdiplus\GdipDeleteStringFormat", A_PtrSize ? "UPtr" : "UInt", hFormat)
}
;#####################################################################################
Gdip_DeleteFontFamily(hFamily)
{
return DllCall("gdiplus\GdipDeleteFontFamily", A_PtrSize ? "UPtr" : "UInt", hFamily)
}
;#####################################################################################
Gdip_DeleteMatrix(Matrix)
{
return DllCall("gdiplus\GdipDeleteMatrix", A_PtrSize ? "UPtr" : "UInt", Matrix)
}
;#####################################################################################
; Text functions
;#####################################################################################
Gdip_TextToGraphics(pGraphics, Text, Options, Font="Arial", Width="", Height="", Measure=0)
{
IWidth := Width, IHeight:= Height
RegExMatch(Options, "i)X([\-\d\.]+)(p*)", xpos)
RegExMatch(Options, "i)Y([\-\d\.]+)(p*)", ypos)
RegExMatch(Options, "i)W([\-\d\.]+)(p*)", Width)
RegExMatch(Options, "i)H([\-\d\.]+)(p*)", Height)
RegExMatch(Options, "i)C(?!(entre|enter))([a-f\d]+)", Colour)
RegExMatch(Options, "i)Top|Up|Bottom|Down|vCentre|vCenter", vPos)
RegExMatch(Options, "i)NoWrap", NoWrap)
RegExMatch(Options, "i)R(\d)", Rendering)
RegExMatch(Options, "i)S(\d+)(p*)", Size)
if !Gdip_DeleteBrush(Gdip_CloneBrush(Colour2))
PassBrush := 1, pBrush := Colour2
if !(IWidth && IHeight) && (xpos2 || ypos2 || Width2 || Height2 || Size2)
return -1
Style := 0, Styles := "Regular|Bold|Italic|BoldItalic|Underline|Strikeout"
Loop, Parse, Styles, |
{
if RegExMatch(Options, "\b" A_loopField)
Style |= (A_LoopField != "StrikeOut") ? (A_Index-1) : 8
}
Align := 0, Alignments := "Near|Left|Centre|Center|Far|Right"
Loop, Parse, Alignments, |
{
if RegExMatch(Options, "\b" A_loopField)
Align |= A_Index//2.1 ; 0|0|1|1|2|2
}
xpos := (xpos1 != "") ? xpos2 ? IWidth*(xpos1/100) : xpos1 : 0
ypos := (ypos1 != "") ? ypos2 ? IHeight*(ypos1/100) : ypos1 : 0
Width := Width1 ? Width2 ? IWidth*(Width1/100) : Width1 : IWidth
Height := Height1 ? Height2 ? IHeight*(Height1/100) : Height1 : IHeight
if !PassBrush
Colour := "0x" (Colour2 ? Colour2 : "ff000000")
Rendering := ((Rendering1 >= 0) && (Rendering1 <= 5)) ? Rendering1 : 4
Size := (Size1 > 0) ? Size2 ? IHeight*(Size1/100) : Size1 : 12
hFamily := Gdip_FontFamilyCreate(Font)
hFont := Gdip_FontCreate(hFamily, Size, Style)
FormatStyle := NoWrap ? 0x4000 | 0x1000 : 0x4000
hFormat := Gdip_StringFormatCreate(FormatStyle)
pBrush := PassBrush ? pBrush : Gdip_BrushCreateSolid(Colour)
if !(hFamily && hFont && hFormat && pBrush && pGraphics)
return !pGraphics ? -2 : !hFamily ? -3 : !hFont ? -4 : !hFormat ? -5 : !pBrush ? -6 : 0
CreateRectF(RC, xpos, ypos, Width, Height)
Gdip_SetStringFormatAlign(hFormat, Align)
Gdip_SetTextRenderingHint(pGraphics, Rendering)
ReturnRC := Gdip_MeasureString(pGraphics, Text, hFont, hFormat, RC)
if vPos
{
StringSplit, ReturnRC, ReturnRC, |
if (vPos = "vCentre") || (vPos = "vCenter")
ypos += (Height-ReturnRC4)//2
else if (vPos = "Top") || (vPos = "Up")
ypos := 0
else if (vPos = "Bottom") || (vPos = "Down")
ypos := Height-ReturnRC4
CreateRectF(RC, xpos, ypos, Width, ReturnRC4)
ReturnRC := Gdip_MeasureString(pGraphics, Text, hFont, hFormat, RC)
}
if !Measure
E := Gdip_DrawString(pGraphics, Text, hFont, hFormat, pBrush, RC)
if !PassBrush
Gdip_DeleteBrush(pBrush)
Gdip_DeleteStringFormat(hFormat)
Gdip_DeleteFont(hFont)
Gdip_DeleteFontFamily(hFamily)
return E ? E : ReturnRC
}
;#####################################################################################
Gdip_DrawString(pGraphics, sString, hFont, hFormat, pBrush, ByRef RectF)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if (!A_IsUnicode)
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sString, "int", -1, Ptr, 0, "int", 0)
VarSetCapacity(wString, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sString, "int", -1, Ptr, &wString, "int", nSize)
}
return DllCall("gdiplus\GdipDrawString"
, Ptr, pGraphics
, Ptr, A_IsUnicode ? &sString : &wString
, "int", -1
, Ptr, hFont
, Ptr, &RectF
, Ptr, hFormat
, Ptr, pBrush)
}
;#####################################################################################
Gdip_MeasureString(pGraphics, sString, hFont, hFormat, ByRef RectF)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
VarSetCapacity(RC, 16)
if !A_IsUnicode
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sString, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wString, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &sString, "int", -1, Ptr, &wString, "int", nSize)
}
DllCall("gdiplus\GdipMeasureString"
, Ptr, pGraphics
, Ptr, A_IsUnicode ? &sString : &wString
, "int", -1
, Ptr, hFont
, Ptr, &RectF
, Ptr, hFormat
, Ptr, &RC
, "uint*", Chars
, "uint*", Lines)
return &RC ? NumGet(RC, 0, "float") "|" NumGet(RC, 4, "float") "|" NumGet(RC, 8, "float") "|" NumGet(RC, 12, "float") "|" Chars "|" Lines : 0
}
; Near = 0
; Center = 1
; Far = 2
Gdip_SetStringFormatAlign(hFormat, Align)
{
return DllCall("gdiplus\GdipSetStringFormatAlign", A_PtrSize ? "UPtr" : "UInt", hFormat, "int", Align)
}
; StringFormatFlagsDirectionRightToLeft = 0x00000001
; StringFormatFlagsDirectionVertical = 0x00000002
; StringFormatFlagsNoFitBlackBox = 0x00000004
; StringFormatFlagsDisplayFormatControl = 0x00000020
; StringFormatFlagsNoFontFallback = 0x00000400
; StringFormatFlagsMeasureTrailingSpaces = 0x00000800
; StringFormatFlagsNoWrap = 0x00001000
; StringFormatFlagsLineLimit = 0x00002000
; StringFormatFlagsNoClip = 0x00004000
Gdip_StringFormatCreate(Format=0, Lang=0)
{
DllCall("gdiplus\GdipCreateStringFormat", "int", Format, "int", Lang, A_PtrSize ? "UPtr*" : "UInt*", hFormat)
return hFormat
}
; Regular = 0
; Bold = 1
; Italic = 2
; BoldItalic = 3
; Underline = 4
; Strikeout = 8
Gdip_FontCreate(hFamily, Size, Style=0)
{
DllCall("gdiplus\GdipCreateFont", A_PtrSize ? "UPtr" : "UInt", hFamily, "float", Size, "int", Style, "int", 0, A_PtrSize ? "UPtr*" : "UInt*", hFont)
return hFont
}
Gdip_FontFamilyCreate(Font)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if (!A_IsUnicode)
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &Font, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wFont, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, Ptr, &Font, "int", -1, Ptr, &wFont, "int", nSize)
}
DllCall("gdiplus\GdipCreateFontFamilyFromName"
, Ptr, A_IsUnicode ? &Font : &wFont
, "uint", 0
, A_PtrSize ? "UPtr*" : "UInt*", hFamily)
return hFamily
}
;#####################################################################################
; Matrix functions
;#####################################################################################
Gdip_CreateAffineMatrix(m11, m12, m21, m22, x, y)
{
DllCall("gdiplus\GdipCreateMatrix2", "float", m11, "float", m12, "float", m21, "float", m22, "float", x, "float", y, A_PtrSize ? "UPtr*" : "UInt*", Matrix)
return Matrix
}
Gdip_CreateMatrix()
{
DllCall("gdiplus\GdipCreateMatrix", A_PtrSize ? "UPtr*" : "UInt*", Matrix)
return Matrix
}
;#####################################################################################
; GraphicsPath functions
;#####################################################################################
; Alternate = 0
; Winding = 1
Gdip_CreatePath(BrushMode=0)
{
DllCall("gdiplus\GdipCreatePath", "int", BrushMode, A_PtrSize ? "UPtr*" : "UInt*", Path)
return Path
}
Gdip_AddPathEllipse(Path, x, y, w, h)
{
return DllCall("gdiplus\GdipAddPathEllipse", A_PtrSize ? "UPtr" : "UInt", Path, "float", x, "float", y, "float", w, "float", h)
}
Gdip_AddPathPolygon(Path, Points)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipAddPathPolygon", Ptr, Path, Ptr, &PointF, "int", Points0)
}
Gdip_DeletePath(Path)
{
return DllCall("gdiplus\GdipDeletePath", A_PtrSize ? "UPtr" : "UInt", Path)
}
;#####################################################################################
; Quality functions
;#####################################################################################
; SystemDefault = 0
; SingleBitPerPixelGridFit = 1
; SingleBitPerPixel = 2
; AntiAliasGridFit = 3
; AntiAlias = 4
Gdip_SetTextRenderingHint(pGraphics, RenderingHint)
{
return DllCall("gdiplus\GdipSetTextRenderingHint", A_PtrSize ? "UPtr" : "UInt", pGraphics, "int", RenderingHint)
}
; Default = 0
; LowQuality = 1
; HighQuality = 2
; Bilinear = 3
; Bicubic = 4
; NearestNeighbor = 5
; HighQualityBilinear = 6
; HighQualityBicubic = 7
Gdip_SetInterpolationMode(pGraphics, InterpolationMode)
{
return DllCall("gdiplus\GdipSetInterpolationMode", A_PtrSize ? "UPtr" : "UInt", pGraphics, "int", InterpolationMode)
}
; Default = 0
; HighSpeed = 1
; HighQuality = 2
; None = 3
; AntiAlias = 4
Gdip_SetSmoothingMode(pGraphics, SmoothingMode)
{
return DllCall("gdiplus\GdipSetSmoothingMode", A_PtrSize ? "UPtr" : "UInt", pGraphics, "int", SmoothingMode)
}
; CompositingModeSourceOver = 0 (blended)
; CompositingModeSourceCopy = 1 (overwrite)
Gdip_SetCompositingMode(pGraphics, CompositingMode=0)
{
return DllCall("gdiplus\GdipSetCompositingMode", A_PtrSize ? "UPtr" : "UInt", pGraphics, "int", CompositingMode)
}
;#####################################################################################
; Extra functions
;#####################################################################################
Gdip_Startup()
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
if !DllCall("GetModuleHandle", "str", "gdiplus", Ptr)
DllCall("LoadLibrary", "str", "gdiplus")
VarSetCapacity(si, A_PtrSize = 8 ? 24 : 16, 0), si := Chr(1)
DllCall("gdiplus\GdiplusStartup", A_PtrSize ? "UPtr*" : "uint*", pToken, Ptr, &si, Ptr, 0)
return pToken
}
Gdip_Shutdown(pToken)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
DllCall("gdiplus\GdiplusShutdown", Ptr, pToken)
if hModule := DllCall("GetModuleHandle", "str", "gdiplus", Ptr)
DllCall("FreeLibrary", Ptr, hModule)
return 0
}
; Prepend = 0; The new operation is applied before the old operation.
; Append = 1; The new operation is applied after the old operation.
Gdip_RotateWorldTransform(pGraphics, Angle, MatrixOrder=0)
{
return DllCall("gdiplus\GdipRotateWorldTransform", A_PtrSize ? "UPtr" : "UInt", pGraphics, "float", Angle, "int", MatrixOrder)
}
Gdip_ScaleWorldTransform(pGraphics, x, y, MatrixOrder=0)
{
return DllCall("gdiplus\GdipScaleWorldTransform", A_PtrSize ? "UPtr" : "UInt", pGraphics, "float", x, "float", y, "int", MatrixOrder)
}
Gdip_TranslateWorldTransform(pGraphics, x, y, MatrixOrder=0)
{
return DllCall("gdiplus\GdipTranslateWorldTransform", A_PtrSize ? "UPtr" : "UInt", pGraphics, "float", x, "float", y, "int", MatrixOrder)
}
Gdip_ResetWorldTransform(pGraphics)
{
return DllCall("gdiplus\GdipResetWorldTransform", A_PtrSize ? "UPtr" : "UInt", pGraphics)
}
Gdip_GetRotatedTranslation(Width, Height, Angle, ByRef xTranslation, ByRef yTranslation)
{
pi := 3.14159, TAngle := Angle*(pi/180)
Bound := (Angle >= 0) ? Mod(Angle, 360) : 360-Mod(-Angle, -360)
if ((Bound >= 0) && (Bound <= 90))
xTranslation := Height*Sin(TAngle), yTranslation := 0
else if ((Bound > 90) && (Bound <= 180))
xTranslation := (Height*Sin(TAngle))-(Width*Cos(TAngle)), yTranslation := -Height*Cos(TAngle)
else if ((Bound > 180) && (Bound <= 270))
xTranslation := -(Width*Cos(TAngle)), yTranslation := -(Height*Cos(TAngle))-(Width*Sin(TAngle))
else if ((Bound > 270) && (Bound <= 360))
xTranslation := 0, yTranslation := -Width*Sin(TAngle)
}
Gdip_GetRotatedDimensions(Width, Height, Angle, ByRef RWidth, ByRef RHeight)
{
pi := 3.14159, TAngle := Angle*(pi/180)
if !(Width && Height)
return -1
RWidth := Ceil(Abs(Width*Cos(TAngle))+Abs(Height*Sin(TAngle)))
RHeight := Ceil(Abs(Width*Sin(TAngle))+Abs(Height*Cos(Tangle)))
}
; RotateNoneFlipNone = 0
; Rotate90FlipNone = 1
; Rotate180FlipNone = 2
; Rotate270FlipNone = 3
; RotateNoneFlipX = 4
; Rotate90FlipX = 5
; Rotate180FlipX = 6
; Rotate270FlipX = 7
; RotateNoneFlipY = Rotate180FlipX
; Rotate90FlipY = Rotate270FlipX
; Rotate180FlipY = RotateNoneFlipX
; Rotate270FlipY = Rotate90FlipX
; RotateNoneFlipXY = Rotate180FlipNone
; Rotate90FlipXY = Rotate270FlipNone
; Rotate180FlipXY = RotateNoneFlipNone
; Rotate270FlipXY = Rotate90FlipNone
Gdip_ImageRotateFlip(pBitmap, RotateFlipType=1)
{
return DllCall("gdiplus\GdipImageRotateFlip", A_PtrSize ? "UPtr" : "UInt", pBitmap, "int", RotateFlipType)
}
; Replace = 0
; Intersect = 1
; Union = 2
; Xor = 3
; Exclude = 4
; Complement = 5
Gdip_SetClipRect(pGraphics, x, y, w, h, CombineMode=0)
{
return DllCall("gdiplus\GdipSetClipRect", A_PtrSize ? "UPtr" : "UInt", pGraphics, "float", x, "float", y, "float", w, "float", h, "int", CombineMode)
}
Gdip_SetClipPath(pGraphics, Path, CombineMode=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipSetClipPath", Ptr, pGraphics, Ptr, Path, "int", CombineMode)
}
Gdip_ResetClip(pGraphics)
{
return DllCall("gdiplus\GdipResetClip", A_PtrSize ? "UPtr" : "UInt", pGraphics)
}
Gdip_GetClipRegion(pGraphics)
{
Region := Gdip_CreateRegion()
DllCall("gdiplus\GdipGetClip", A_PtrSize ? "UPtr" : "UInt", pGraphics, "UInt*", Region)
return Region
}
Gdip_SetClipRegion(pGraphics, Region, CombineMode=0)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("gdiplus\GdipSetClipRegion", Ptr, pGraphics, Ptr, Region, "int", CombineMode)
}
Gdip_CreateRegion()
{
DllCall("gdiplus\GdipCreateRegion", "UInt*", Region)
return Region
}
Gdip_DeleteRegion(Region)
{
return DllCall("gdiplus\GdipDeleteRegion", A_PtrSize ? "UPtr" : "UInt", Region)
}
;#####################################################################################
; BitmapLockBits
;#####################################################################################
Gdip_LockBits(pBitmap, x, y, w, h, ByRef Stride, ByRef Scan0, ByRef BitmapData, LockMode = 3, PixelFormat = 0x26200a)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
CreateRect(Rect, x, y, w, h)
VarSetCapacity(BitmapData, 16+2*(A_PtrSize ? A_PtrSize : 4), 0)
E := DllCall("Gdiplus\GdipBitmapLockBits", Ptr, pBitmap, Ptr, &Rect, "uint", LockMode, "int", PixelFormat, Ptr, &BitmapData)
Stride := NumGet(BitmapData, 8, "Int")
Scan0 := NumGet(BitmapData, 16, Ptr)
return E
}
;#####################################################################################
Gdip_UnlockBits(pBitmap, ByRef BitmapData)
{
Ptr := A_PtrSize ? "UPtr" : "UInt"
return DllCall("Gdiplus\GdipBitmapUnlockBits", Ptr, pBitmap, Ptr, &BitmapData)
}
;#####################################################################################
Gdip_SetLockBitPixel(ARGB, Scan0, x, y, Stride)
{
Numput(ARGB, Scan0+0, (x*4)+(y*Stride), "UInt")
}
;#####################################################################################
Gdip_GetLockBitPixel(Scan0, x, y, Stride)
{
return NumGet(Scan0+0, (x*4)+(y*Stride), "UInt")
}
;#####################################################################################
Gdip_PixelateBitmap(pBitmap, ByRef pBitmapOut, BlockSize)
{
static PixelateBitmap
Ptr := A_PtrSize ? "UPtr" : "UInt"
if (!PixelateBitmap)
{
if A_PtrSize != 8 ; x86 machine code
MCode_PixelateBitmap =
(LTrim Join
558BEC83EC3C8B4514538B5D1C99F7FB56578BC88955EC894DD885C90F8E830200008B451099F7FB8365DC008365E000894DC88955F08945E833FF897DD4
397DE80F8E160100008BCB0FAFCB894DCC33C08945F88945FC89451C8945143BD87E608B45088D50028BC82BCA8BF02BF2418945F48B45E02955F4894DC4
8D0CB80FAFCB03CA895DD08BD1895DE40FB64416030145140FB60201451C8B45C40FB604100145FC8B45F40FB604020145F883C204FF4DE475D6034D18FF
4DD075C98B4DCC8B451499F7F98945148B451C99F7F989451C8B45FC99F7F98945FC8B45F899F7F98945F885DB7E648B450C8D50028BC82BCA83C103894D
C48BC82BCA41894DF48B4DD48945E48B45E02955E48D0C880FAFCB03CA895DD08BD18BF38A45148B7DC48804178A451C8B7DF488028A45FC8804178A45F8
8B7DE488043A83C2044E75DA034D18FF4DD075CE8B4DCC8B7DD447897DD43B7DE80F8CF2FEFFFF837DF0000F842C01000033C08945F88945FC89451C8945
148945E43BD87E65837DF0007E578B4DDC034DE48B75E80FAF4D180FAFF38B45088D500203CA8D0CB18BF08BF88945F48B45F02BF22BFA2955F48945CC0F
B6440E030145140FB60101451C0FB6440F010145FC8B45F40FB604010145F883C104FF4DCC75D8FF45E4395DE47C9B8B4DF00FAFCB85C9740B8B451499F7
F9894514EB048365140033F63BCE740B8B451C99F7F989451CEB0389751C3BCE740B8B45FC99F7F98945FCEB038975FC3BCE740B8B45F899F7F98945F8EB
038975F88975E43BDE7E5A837DF0007E4C8B4DDC034DE48B75E80FAF4D180FAFF38B450C8D500203CA8D0CB18BF08BF82BF22BFA2BC28B55F08955CC8A55
1488540E038A551C88118A55FC88540F018A55F888140183C104FF4DCC75DFFF45E4395DE47CA68B45180145E0015DDCFF4DC80F8594FDFFFF8B451099F7
FB8955F08945E885C00F8E450100008B45EC0FAFC38365DC008945D48B45E88945CC33C08945F88945FC89451C8945148945103945EC7E6085DB7E518B4D
D88B45080FAFCB034D108D50020FAF4D18034DDC8BF08BF88945F403CA2BF22BFA2955F4895DC80FB6440E030145140FB60101451C0FB6440F010145FC8B
45F40FB604080145F883C104FF4DC875D8FF45108B45103B45EC7CA08B4DD485C9740B8B451499F7F9894514EB048365140033F63BCE740B8B451C99F7F9
89451CEB0389751C3BCE740B8B45FC99F7F98945FCEB038975FC3BCE740B8B45F899F7F98945F8EB038975F88975103975EC7E5585DB7E468B4DD88B450C
0FAFCB034D108D50020FAF4D18034DDC8BF08BF803CA2BF22BFA2BC2895DC88A551488540E038A551C88118A55FC88540F018A55F888140183C104FF4DC8
75DFFF45108B45103B45EC7CAB8BC3C1E0020145DCFF4DCC0F85CEFEFFFF8B4DEC33C08945F88945FC89451C8945148945103BC87E6C3945F07E5C8B4DD8
8B75E80FAFCB034D100FAFF30FAF4D188B45088D500203CA8D0CB18BF08BF88945F48B45F02BF22BFA2955F48945C80FB6440E030145140FB60101451C0F
B6440F010145FC8B45F40FB604010145F883C104FF4DC875D833C0FF45108B4DEC394D107C940FAF4DF03BC874068B451499F7F933F68945143BCE740B8B
451C99F7F989451CEB0389751C3BCE740B8B45FC99F7F98945FCEB038975FC3BCE740B8B45F899F7F98945F8EB038975F88975083975EC7E63EB0233F639
75F07E4F8B4DD88B75E80FAFCB034D080FAFF30FAF4D188B450C8D500203CA8D0CB18BF08BF82BF22BFA2BC28B55F08955108A551488540E038A551C8811
8A55FC88540F018A55F888140883C104FF4D1075DFFF45088B45083B45EC7C9F5F5E33C05BC9C21800
)
else ; x64 machine code
MCode_PixelateBitmap =
(LTrim Join
4489442418488954241048894C24085355565741544155415641574883EC28418BC1448B8C24980000004C8BDA99488BD941F7F9448BD0448BFA8954240C
448994248800000085C00F8E9D020000418BC04533E4458BF299448924244C8954241041F7F933C9898C24980000008BEA89542404448BE889442408EB05
4C8B5C24784585ED0F8E1A010000458BF1418BFD48897C2418450FAFF14533D233F633ED4533E44533ED4585C97E5B4C63BC2490000000418D040A410FAF
C148984C8D441802498BD9498BD04D8BD90FB642010FB64AFF4403E80FB60203E90FB64AFE4883C2044403E003F149FFCB75DE4D03C748FFCB75D0488B7C
24188B8C24980000004C8B5C2478418BC59941F7FE448BE8418BC49941F7FE448BE08BC59941F7FE8BE88BC69941F7FE8BF04585C97E4048639C24900000
004103CA4D8BC1410FAFC94863C94A8D541902488BCA498BC144886901448821408869FF408871FE4883C10448FFC875E84803D349FFC875DA8B8C249800
0000488B5C24704C8B5C24784183C20448FFCF48897C24180F850AFFFFFF8B6C2404448B2424448B6C24084C8B74241085ED0F840A01000033FF33DB4533
DB4533D24533C04585C97E53488B74247085ED7E42438D0C04418BC50FAF8C2490000000410FAFC18D04814863C8488D5431028BCD0FB642014403D00FB6
024883C2044403D80FB642FB03D80FB642FA03F848FFC975DE41FFC0453BC17CB28BCD410FAFC985C9740A418BC299F7F98BF0EB0233F685C9740B418BC3
99F7F9448BD8EB034533DB85C9740A8BC399F7F9448BD0EB034533D285C9740A8BC799F7F9448BC0EB034533C033D24585C97E4D4C8B74247885ED7E3841
8D0C14418BC50FAF8C2490000000410FAFC18D04814863C84A8D4431028BCD40887001448818448850FF448840FE4883C00448FFC975E8FFC2413BD17CBD
4C8B7424108B8C2498000000038C2490000000488B5C24704503E149FFCE44892424898C24980000004C897424100F859EFDFFFF448B7C240C448B842480
000000418BC09941F7F98BE8448BEA89942498000000896C240C85C00F8E3B010000448BAC2488000000418BCF448BF5410FAFC9898C248000000033FF33
ED33F64533DB4533D24533C04585FF7E524585C97E40418BC5410FAFC14103C00FAF84249000000003C74898488D541802498BD90FB642014403D00FB602
4883C2044403D80FB642FB03F00FB642FA03E848FFCB75DE488B5C247041FFC0453BC77CAE85C9740B418BC299F7F9448BE0EB034533E485C9740A418BC3
99F7F98BD8EB0233DB85C9740A8BC699F7F9448BD8EB034533DB85C9740A8BC599F7F9448BD0EB034533D24533C04585FF7E4E488B4C24784585C97E3541
8BC5410FAFC14103C00FAF84249000000003C74898488D540802498BC144886201881A44885AFF448852FE4883C20448FFC875E941FFC0453BC77CBE8B8C
2480000000488B5C2470418BC1C1E00203F849FFCE0F85ECFEFFFF448BAC24980000008B6C240C448BA4248800000033FF33DB4533DB4533D24533C04585
FF7E5A488B7424704585ED7E48418BCC8BC5410FAFC94103C80FAF8C2490000000410FAFC18D04814863C8488D543102418BCD0FB642014403D00FB60248
83C2044403D80FB642FB03D80FB642FA03F848FFC975DE41FFC0453BC77CAB418BCF410FAFCD85C9740A418BC299F7F98BF0EB0233F685C9740B418BC399
F7F9448BD8EB034533DB85C9740A8BC399F7F9448BD0EB034533D285C9740A8BC799F7F9448BC0EB034533C033D24585FF7E4E4585ED7E42418BCC8BC541
0FAFC903CA0FAF8C2490000000410FAFC18D04814863C8488B442478488D440102418BCD40887001448818448850FF448840FE4883C00448FFC975E8FFC2
413BD77CB233C04883C428415F415E415D415C5F5E5D5BC3
)
VarSetCapacity(PixelateBitmap, StrLen(MCode_PixelateBitmap)//2)
Loop % StrLen(MCode_PixelateBitmap)//2 ;%
NumPut("0x" SubStr(MCode_PixelateBitmap, (2*A_Index)-1, 2), PixelateBitmap, A_Index-1, "UChar")
DllCall("VirtualProtect", Ptr, &PixelateBitmap, Ptr, VarSetCapacity(PixelateBitmap), "uint", 0x40, A_PtrSize ? "UPtr*" : "UInt*", 0)
}
Gdip_GetImageDimensions(pBitmap, Width, Height)
if (Width != Gdip_GetImageWidth(pBitmapOut) || Height != Gdip_GetImageHeight(pBitmapOut))
return -1
if (BlockSize > Width || BlockSize > Height)
return -2
E1 := Gdip_LockBits(pBitmap, 0, 0, Width, Height, Stride1, Scan01, BitmapData1)
E2 := Gdip_LockBits(pBitmapOut, 0, 0, Width, Height, Stride2, Scan02, BitmapData2)
if (E1 || E2)
return -3
E := DllCall(&PixelateBitmap, Ptr, Scan01, Ptr, Scan02, "int", Width, "int", Height, "int", Stride1, "int", BlockSize)
Gdip_UnlockBits(pBitmap, BitmapData1), Gdip_UnlockBits(pBitmapOut, BitmapData2)
return 0
}
;#####################################################################################
Gdip_ToARGB(A, R, G, B)
{
return (A << 24) | (R << 16) | (G << 8) | B
}
;#####################################################################################
Gdip_FromARGB(ARGB, ByRef A, ByRef R, ByRef G, ByRef B)
{
A := (0xff000000 & ARGB) >> 24
R := (0x00ff0000 & ARGB) >> 16
G := (0x0000ff00 & ARGB) >> 8
B := 0x000000ff & ARGB
}
;#####################################################################################
Gdip_AFromARGB(ARGB)
{
return (0xff000000 & ARGB) >> 24
}
;#####################################################################################
Gdip_RFromARGB(ARGB)
{
return (0x00ff0000 & ARGB) >> 16
}
;#####################################################################################
Gdip_GFromARGB(ARGB)
{
return (0x0000ff00 & ARGB) >> 8
}
;#####################################################################################
Gdip_BFromARGB(ARGB)
{
return 0x000000ff & ARGB
}
;#####################################################################################
StrGetB(Address, Length=-1, Encoding=0)
{
; Flexible parameter handling:
if Length is not integer
Encoding := Length, Length := -1
; Check for obvious errors.
if (Address+0 < 1024)
return
; Ensure 'Encoding' contains a numeric identifier.
if Encoding = UTF-16
Encoding = 1200
else if Encoding = UTF-8
Encoding = 65001
else if SubStr(Encoding,1,2)="CP"
Encoding := SubStr(Encoding,3)
if !Encoding ; "" or 0
{
; No conversion necessary, but we might not want the whole string.
if (Length == -1)
Length := DllCall("lstrlen", "uint", Address)
VarSetCapacity(String, Length)
DllCall("lstrcpyn", "str", String, "uint", Address, "int", Length + 1)
}
else if Encoding = 1200 ; UTF-16
{
char_count := DllCall("WideCharToMultiByte", "uint", 0, "uint", 0x400, "uint", Address, "int", Length, "uint", 0, "uint", 0, "uint", 0, "uint", 0)
VarSetCapacity(String, char_count)
DllCall("WideCharToMultiByte", "uint", 0, "uint", 0x400, "uint", Address, "int", Length, "str", String, "int", char_count, "uint", 0, "uint", 0)
}
else if Encoding is integer
{
; Convert from target encoding to UTF-16 then to the active code page.
char_count := DllCall("MultiByteToWideChar", "uint", Encoding, "uint", 0, "uint", Address, "int", Length, "uint", 0, "int", 0)
VarSetCapacity(String, char_count * 2)
char_count := DllCall("MultiByteToWideChar", "uint", Encoding, "uint", 0, "uint", Address, "int", Length, "uint", &String, "int", char_count * 2)
String := StrGetB(&String, char_count, 1200)
}
return String
}