926

Re: AHK: Замена "Window Spy"

У меня лупа подглючивает.
1) Иногда в ней промелькивает какое-то левое изображение.
(Ставим увеличение на единицу и на рабочем столе водим мышкой по иконкам находящимися прямо над окном ahk spy.)

2) Если немного поработать лупой, то она мелькает, когда ее закрываешь.

927 (изменено: serzh82saratov, 2017-12-31 12:27:52)

Re: AHK: Замена "Window Spy"

1) В классике да, это в основном при включенных рамках (красная синяя) когда она попадает на окно лупы. Также оказалось что в классике лупа не видит лайеред окна, а встроенная лупа видит. Видимо надо пробовать на gdi.

Ещё интересно как встроенная может показывать изображение которое под её же окном.

2) В классике сильнее заметно, http://forum.script-coding.com/viewtopi … 01#p122601 это из за DCToStatic.

ап:

в классике лупа не видит лайеред окна

Разобрался, не было CAPTUREBLT в StretchBlt.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

928

Re: AHK: Замена "Window Spy"

serzh82saratov пишет:

в основном при включенных рамках (красная синяя) когда она попадает на окно лупы

Когда рамка не попадает на окно лупы, есть проблемы?

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

929

Re: AHK: Замена "Window Spy"

Нет.

930 (изменено: serzh82saratov, 2018-01-06 18:57:08)

Re: AHK: Замена "Window Spy"

Malcev
Привет единственный пользователь. Переделал лупу на Layered Window, мелькать не должно.
Но, также пришлось поправить весь синхрон проги с лупой, и заменить костыли от мельканий, на костыли для привязки Layered Window к окну лупы, потому ожидается много не замеченных мною багов.

https://raw.githubusercontent.com/serzh … AhkSpy.ahk

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

931

Re: AHK: Замена "Window Spy"

Вроде всё в порядке.

932

Re: AHK: Замена "Window Spy"

На экране с большим разрешением и большой плотностью пикселей интерфейс по умолчанию очень мал. Выхожу из ситуации увеличиванием текста, зажимая Ctrl. Но хотелось бы, чтобы данная настройка масштабирования сохранялась до следующего запуска скрипта. Можно ли добавить это положение в следующее обновление?

Win10x64, AHK v1.1.25

933 (изменено: serzh82saratov, 2018-03-18 12:21:18)

Re: AHK: Замена "Window Spy"

Это уже давно есть.

Remember font size - Запоминать размер шрифта

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

934

Re: AHK: Замена "Window Spy"

serzh82saratov, Спасибо! В настройках View Settings выставил все галочки, но размер шрифта и масштаб по-прежнему сбрасываются. v.3.01

Win10x64, AHK v1.1.25

935

Re: AHK: Замена "Window Spy"

Времени сейчас нет чтобы тщательно разбиратся, у меня всё работает.
А что за настройка про масштаб?
Может у вас вообще все настройки не применяются?

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

936

Re: AHK: Замена "Window Spy"

serzh82saratov пишет:

А что за настройка про масштаб?

Я просто имел в виду, что все настройки сохранения отображения включил в выпадающем меню.

Визуально применяются, шрифт становится больше. Но после повторного открытия вновь мелкий.

Win10x64, AHK v1.1.25

937 (изменено: Malcev, 2018-04-25 02:13:46)

Re: AHK: Замена "Window Spy"

На Win10 не показывается Info - Internet Explorer_Server.
Если же заменить эту функцию:

WBGet(hwnd) {
	Static Msg := DllCall("RegisterWindowMessage", "Str", "WM_HTML_GETOBJECT")
		, IID_IHTMLWindow2 := "{332C4427-26CB-11D0-B483-00C04FD90119}"
	SendMessage, Msg, , , , ahk_id %hwnd%
	DllCall("oleacc\ObjectFromLresult", "Ptr", ErrorLevel, "Ptr", 0, "Ptr", 0, PtrP, pdoc)
	Return ComObj(9, ComObjQuery(pdoc, IID_IHTMLWindow2, IID_IHTMLWindow2), 1), ObjRelease(pdoc)
}

на эту:

;[WBGet function for AHK v1.1]
;WBGet function - AutoHotkey Community
;https://autohotkey.com/boards/viewtopic.php?f=6&t=39869

WBGet(hwnd) {               ;// based on ComObjQuery docs
   static msg := DllCall("RegisterWindowMessage", "str", "WM_HTML_GETOBJECT")
        , IID := "{0002DF05-0000-0000-C000-000000000046}"   ;// IID_IWebBrowserApp
;//     , IID := "{332C4427-26CB-11D0-B483-00C04FD90119}"   ;// IID_IHTMLWindow2
   SendMessage, Msg, , , , ahk_id %hwnd%
   if (ErrorLevel != "FAIL") {
      lResult:=ErrorLevel, VarSetCapacity(GUID,16,0)
      if DllCall("ole32\CLSIDFromString", "wstr","{332C4425-26CB-11D0-B483-00C04FD90119}", "ptr",&GUID) >= 0 {
         DllCall("oleacc\ObjectFromLresult", "ptr",lResult, "ptr",&GUID, "ptr",0, "ptr*",pdoc)
         return ComObj(9,ComObjQuery(pdoc,IID,IID),1), ObjRelease(pdoc)
      }
   }
}

то работает.
Или просто сделать так:

WBGet(hwnd) {
	Static Msg := DllCall("RegisterWindowMessage", "Str", "WM_HTML_GETOBJECT")
		, IID_IHTMLWindow2 := "{332C4427-26CB-11D0-B483-00C04FD90119}"
	SendMessage, Msg, , , , ahk_id %hwnd%
    VarSetCapacity(GUID,16,0)
	DllCall("oleacc\ObjectFromLresult", "Ptr", ErrorLevel, "Ptr", &GUID, "Ptr", 0, PtrP, pdoc)
	Return ComObj(9, ComObjQuery(pdoc, IID_IHTMLWindow2, IID_IHTMLWindow2), 1), ObjRelease(pdoc)
}

938

Re: AHK: Замена "Window Spy"

Исправил так:

WBGet(hwnd) {
	Static Msg := DllCall("RegisterWindowMessage", "Str", "WM_HTML_GETOBJECT")
	, IID_IHTMLWindow2 := "{332C4427-26CB-11D0-B483-00C04FD90119}", GUID, _ := VarSetCapacity(GUID,16,0)
	SendMessage, Msg, , , , ahk_id %hwnd%
	DllCall("oleacc\ObjectFromLresult", "Ptr", ErrorLevel, "Ptr", &GUID, "Ptr", 0, PtrP, pdoc)
	Return ComObj(9, ComObjQuery(pdoc, IID_IHTMLWindow2, IID_IHTMLWindow2), 1), ObjRelease(pdoc)
}
По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

939 (изменено: Malcev, 2018-08-15 13:51:24)

Re: AHK: Замена "Window Spy"

Предлагаю в вкладке Control сделать пункт ProcessId, как сделано это в UI Spy, где показывать PID контрола (так как для каждого контрола процессы могут быть разные).
Типа:

ProcessId: "6140 (notepad)"

https://github.com/blackrosezy/gui-inspect-tool

940 (изменено: serzh82saratov, 2018-08-15 18:04:35)

Re: AHK: Замена "Window Spy"

По ссылке много файлов, я не понял что запускать.

Ты имеешь ввиду что контрол может принадлежать другому окну (процессу)? Тогда там есть заголовок "Window" (третий с верху), там окно прописано, ProcessId там нет, но есть хэндл, будет и так понятно что окно другое.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

941

Re: AHK: Замена "Window Spy"

Ну а там уже если окна разные, то и во вкладке Window не грех посмотреть ProcessId.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

942 (изменено: Malcev, 2018-08-15 18:18:39)

Re: AHK: Замена "Window Spy"

В одном окне могут быть контролы принадлежащие разным процессам. Посмотри на примере вкладок IE.
Запускать UISpy.exe или Inspect.exe.

943

Re: AHK: Замена "Window Spy"

Malcev пишет:

Посмотри на примере вкладок IE.

Я что то фундаментально не понимаю. Есть контрол, если он в окне, то он и принадлежит процессу этого окна. Единственный случай который я знаю, это если мы создали контрол в другом процессе, а потом SetParent.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

944

Re: AHK: Замена "Window Spy"

Не знаю как это реализовано - не углублялся.

945

Re: AHK: Замена "Window Spy"

А я не понимаю что требуется.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

946

Re: AHK: Замена "Window Spy"

Показать какому процессу принадлежит контрол.
Для IE это делается через Controlget, Winget.
А вот для Edge так не получается, пока только приходит на ум использовать UI интерфейс.

947

Re: AHK: Замена "Window Spy"

А чем не подходит вариант из 940, 941?
Или ты предлагаешь во вкладке Control и заголовке Window добавить ProcessId.

По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).

948

Re: AHK: Замена "Window Spy"

Скачай Inspect.exe, выбери там Ui Automation и наведи на рамку окна Ie и потом на содержание страницы - процессы (ProcessId) будут разными.
AhkSpy такого не показывает.

949 (изменено: Malcev, 2018-08-17 01:30:50)

Re: AHK: Замена "Window Spy"

serzh82saratov пишет:

Я что то фундаментально не понимаю. Есть контрол, если он в окне, то он и принадлежит процессу этого окна

Тут описывается:
https://docs.microsoft.com/en-us/dotnet … ding-model
А тут конкретно про IE:
https://blogs.msdn.microsoft.com/ie/200 … ed-ie-lcie
Вот так можно получить истинный PID и имя процесса выделенного контрола:

F11::
WindowHwnd := WinExist("A")
ControlGetFocus, FocusedControl, ahk_id %WindowHwnd%
ControlGet, Hwnd, Hwnd,, %FocusedControl%, ahk_id %WindowHwnd%
WinGet, processname, processname, ahk_id %hwnd%
if (processname = "ApplicationFrameHost.exe")
{
   WinGet, list, list
   loop % list
   {
      if (list%A_Index% = WindowHwnd)
      {
         n := A_Index - 1, WindowHwnd := list%n%
         ControlGetFocus, FocusedControl, ahk_id %WindowHwnd%
         ControlGet, Hwnd, Hwnd,, %FocusedControl%, ahk_id %WindowHwnd%
         WinGet, processname, processname, ahk_id %hwnd%
         break
      }
   }
}
WinGet, Pid, Pid, ahk_id %hwnd%
msgbox % processname "`n" pid

Либо через UIA:

detecthiddenwindows on
uia := UIA_Interface()

F11::
GetFocusedElement := uia.GetFocusedElement()
pid := GetFocusedElement.CurrentProcessId
WinGet, Name, ProcessName, ahk_pid %pid%
msgbox % name "`n" pid
return



;~ UI Automation Constants: http://msdn.microsoft.com/en-us/library/windows/desktop/ee671207(v=vs.85).aspx
;~ UI Automation Enumerations: http://msdn.microsoft.com/en-us/library/windows/desktop/ee671210(v=vs.85).aspx
;~ http://www.autohotkey.com/board/topic/94619-ahk-l-screen-reader-a-tool-to-get-text-anywhere/

/* Questions:
	- better way to do __properties?
	- support for Constants?
	- if method returns a SafeArray, should we return a Wrapped SafeArray, Raw SafeArray, or AHK Array
	- on UIA Interface conversion methods, how should the data be returned? wrapped/extracted or raw? should raw data be a ByRef param?
	- do variants need cleared? what about SysAllocString BSTRs?
	- do RECT struts need destroyed?
	- if returning wrapped data & raw is ByRef, will the wrapped data being released destroy the raw data?
	- returning varaint data other than vt=3|8|9|13|0x2000
	- Cached Members?
	- UIA Element existance - dependent on window being visible (non minimized)?
	- function(params, ByRef out="……")
*/

class UIA_Base {
	__New(p="", flag=1) {
		ObjInsert(this,"__Type","IUIAutomation" SubStr(this.__Class,5))
		,ObjInsert(this,"__Value",p)
		,ObjInsert(this,"__Flag",flag)
	}
	__Get(member) {
		if member not in base,__UIA ; base & __UIA should act as normal
		{	if raw:=SubStr(member,0)="*" ; return raw data - user should know what they are doing
				member:=SubStr(member,1,-1)
			if RegExMatch(this.__properties, "im)^" member ",(\d+),(\w+)", m) { ; if the member is in the properties. if not - give error message
				if (m2="VARIANT")	; return VARIANT data - DllCall output param different
					return UIA_Hr(DllCall(this.__Vt(m1), "ptr",this.__Value, "ptr",UIA_Variant(out)))? (raw?out:UIA_VariantData(out)):
				else if (m2="RECT") ; return RECT struct - DllCall output param different
					return UIA_Hr(DllCall(this.__Vt(m1), "ptr",this.__Value, "ptr",&(rect,VarSetCapacity(rect,16))))? (raw?out:UIA_RectToObject(rect)):
				else if UIA_Hr(DllCall(this.__Vt(m1), "ptr",this.__Value, "ptr*",out))
					return raw?out:m2="BSTR"?StrGet(out):RegExMatch(m2,"i)IUIAutomation\K\w+",n)?new UIA_%n%(out):out ; Bool, int, DWORD, HWND, CONTROLTYPEID, OrientationType?
			}
			else throw Exception("Property not supported by the " this.__Class " Class.",-1,member)
		}
	}
	__Set(member) {
		throw Exception("Assigning values not supported by the " this.__Class " Class.",-1,member)
	}
	__Call(member) {
		if !ObjHasKey(UIA_Base,member)&&!ObjHasKey(this,member)
			throw Exception("Method Call not supported by the " this.__Class " Class.",-1,member)
	}
	__Delete() {
		this.__Flag? ObjRelease(this.__Value):
	}
	__Vt(n) {
		return NumGet(NumGet(this.__Value+0,"ptr")+n*A_PtrSize,"ptr")
	}
}	

class UIA_Interface extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671406(v=vs.85).aspx
	static __IID := "{30cbe57d-d9d0-452a-ab13-7ac5ac4825ee}"
		,  __properties := "ControlViewWalker,14,IUIAutomationTreeWalker`r`nContentViewWalker,15,IUIAutomationTreeWalker`r`nRawViewWalker,16,IUIAutomationTreeWalker`r`nRawViewCondition,17,IUIAutomationCondition`r`nControlViewCondition,18,IUIAutomationCondition`r`nContentViewCondition,19,IUIAutomationCondition`r`nProxyFactoryMapping,48,IUIAutomationProxyFactoryMapping`r`nReservedNotSupportedValue,54,IUnknown`r`nReservedMixedAttributeValue,55,IUnknown"
	
	CompareElements(e1,e2) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "ptr",e1.__Value, "ptr",e2.__Value, "int*",out))? out:
	}
	CompareRuntimeIds(r1,r2) {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "ptr",ComObjValue(r1), "ptr",ComObjValue(r2), "int*",out))? out:
	}
	GetRootElement() {
		return UIA_Hr(DllCall(this.__Vt(5), "ptr",this.__Value, "ptr*",out))? new UIA_Element(out):
	}
	ElementFromHandle(hwnd) {
		return UIA_Hr(DllCall(this.__Vt(6), "ptr",this.__Value, "ptr",hwnd, "ptr*",out))? new UIA_Element(out):
	}
	ElementFromPoint(x="", y="") {
		return UIA_Hr(DllCall(this.__Vt(7), "ptr",this.__Value, "int64",x==""||y==""?0*DllCall("GetCursorPos","Int64*",pt)+pt:x&0xFFFFFFFF|y<<32, "ptr*",out))? new UIA_Element(out):
	}	
	GetFocusedElement() {
		return UIA_Hr(DllCall(this.__Vt(8), "ptr",this.__Value, "ptr*",out))? new UIA_Element(out):
	}
	;~ GetRootElementBuildCache 	9
	;~ ElementFromHandleBuildCache 	10
	;~ ElementFromPointBuildCache 	11
	;~ GetFocusedElementBuildCache 	12
	CreateTreeWalker(condition) {
		return UIA_Hr(DllCall(this.__Vt(13), "ptr",this.__Value, "ptr",Condition.__Value, "ptr*",out))? new UIA_TreeWalker(out):
	}
	;~ CreateCacheRequest 	20

	CreateTrueCondition() {
		return UIA_Hr(DllCall(this.__Vt(21), "ptr",this.__Value, "ptr*",out))? new UIA_Condition(out):
	}
	CreateFalseCondition() {
		return UIA_Hr(DllCall(this.__Vt(22), "ptr",this.__Value, "ptr*",out))? new UIA_Condition(out):
	}
	CreatePropertyCondition(propertyId, ByRef var, type="Variant") {
		if (type!="Variant")
			UIA_Variant(var,type,var)
		return UIA_Hr(DllCall(this.__Vt(23), "ptr",this.__Value, "int",propertyId, "ptr",&var, "ptr*",out))? new UIA_PropertyCondition(out):
	}
	CreatePropertyConditionEx(propertyId, ByRef var, type="Variant", flags=0x1) { ; NOT TESTED
	; PropertyConditionFlags_IgnoreCase = 0x1
		if (type!="Variant")
			UIA_Variant(var,type,var)
		return UIA_Hr(DllCall(this.__Vt(24), "ptr",this.__Value, "int",propertyId, "ptr",&var, "uint",flags, "ptr*",out))? new UIA_PropertyCondition(out):
	}
	CreateAndCondition(c1,c2) {
		return UIA_Hr(DllCall(this.__Vt(25), "ptr",this.__Value, "ptr",c1.__Value, "ptr",c2.__Value, "ptr*",out))? new UIA_AndCondition(out):
	}
	CreateAndConditionFromArray(array) { ; ComObj(0x2003)??
	;->in: AHK Array or Wrapped SafeArray
		if ComObjValue(array)&0x2000
			SafeArray:=array
		else {
			SafeArray:=ComObj(0x2003,DllCall("oleaut32\SafeArrayCreateVector", "uint",13, "uint",0, "uint",array.MaxIndex()),1)
			for i,c in array
				SafeArray[A_Index-1]:=c.__Value, ObjAddRef(c.__Value) ; AddRef - SafeArrayDestroy will release UIA_Conditions - they also release themselves
		}
		return UIA_Hr(DllCall(this.__Vt(26), "ptr",this.__Value, "ptr",ComObjValue(SafeArray), "ptr*",out))? new UIA_AndCondition(out):
	}
	CreateAndConditionFromNativeArray(p*) { ; Not Implemented
		return UIA_NotImplemented()
	/*	[in]           IUIAutomationCondition **conditions,
		[in]           int conditionCount,
		[out, retval]  IUIAutomationCondition **newCondition
	*/
		;~ return UIA_Hr(DllCall(this.__Vt(27), "ptr",this.__Value,
	}
	CreateOrCondition(c1,c2) {
		return UIA_Hr(DllCall(this.__Vt(28), "ptr",this.__Value, "ptr",c1.__Value, "ptr",c2.__Value, "ptr*",out))? new UIA_OrCondition(out):
	}
	CreateOrConditionFromArray(array) {
	;->in: AHK Array or Wrapped SafeArray
		if ComObjValue(array)&0x2000
			SafeArray:=array
		else {
			SafeArray:=ComObj(0x2003,DllCall("oleaut32\SafeArrayCreateVector", "uint",13, "uint",0, "uint",array.MaxIndex()),1)
			for i,c in array
				SafeArray[A_Index-1]:=c.__Value, ObjAddRef(c.__Value) ; AddRef - SafeArrayDestroy will release UIA_Conditions - they also release themselves
		}
		return UIA_Hr(DllCall(this.__Vt(29), "ptr",this.__Value, "ptr",ComObjValue(SafeArray), "ptr*",out))? new UIA_AndCondition(out):
	}
	CreateOrConditionFromNativeArray(p*) { ; Not Implemented
		return UIA_NotImplemented()
	/*	[in]           IUIAutomationCondition **conditions,
		[in]           int conditionCount,
		[out, retval]  IUIAutomationCondition **newCondition
	*/
		;~ return UIA_Hr(DllCall(this.__Vt(27), "ptr",this.__Value,
	}
	CreateNotCondition(c) {
		return UIA_Hr(DllCall(this.__Vt(31), "ptr",this.__Value, "ptr",c.__Value, "ptr*",out))? new UIA_NotCondition(out):
	}

	;~ AddAutomationEventHandler 	32
	;~ RemoveAutomationEventHandler 	33
	;~ AddPropertyChangedEventHandlerNativeArray 	34
	AddPropertyChangedEventHandler(element,scope=0x1,cacheRequest=0,handler="",propertyArray="") {
		SafeArray:=ComObjArray(0x3,propertyArray.MaxIndex())
		for i,propertyId in propertyArray
			SafeArray[i-1]:=propertyId
		return UIA_Hr(DllCall(this.__Vt(35), "ptr",this.__Value, "ptr",element.__Value, "int",scope, "ptr",cacheRequest,"ptr",handler.__Value,"ptr",ComObjValue(SafeArray)))
	}
	;~ RemovePropertyChangedEventHandler 	36
	;~ AddStructureChangedEventHandler 	37
	;~ RemoveStructureChangedEventHandler 	38
	AddFocusChangedEventHandler(cacheRequest, handler) {
		return UIA_Hr(DllCall(this.__Vt(39), "ptr",this.__Value, "ptr",cacheRequest, "ptr",handler.__Value))
	}
	;~ RemoveFocusChangedEventHandler 	40
	;~ RemoveAllEventHandlers 	41

	IntNativeArrayToSafeArray(ByRef nArr, n="") {
		return UIA_Hr(DllCall(this.__Vt(42), "ptr",this.__Value, "ptr",&nArr, "int",n?n:VarSetCapacity(nArr)/4, "ptr*",out))? ComObj(0x2003,out,1):
	}
/*	IntSafeArrayToNativeArray(sArr, Byref nArr="", Byref arrayCount="") { ; NOT WORKING
		VarSetCapacity(nArr,(sArr.MaxIndex()+1)*4)
		return UIA_Hr(DllCall(this.__Vt(43), "ptr",this.__Value, "ptr",ComObjValue(sArr), "ptr*",nArr, "int*",arrayCount))? arrayCount:
	}
*/
	RectToVariant(ByRef rect, ByRef out="") {	; in:{left,top,right,bottom} ; out:(left,top,width,height)
		; in:	RECT Struct
		; out:	AHK Wrapped SafeArray & ByRef Variant
		return UIA_Hr(DllCall(this.__Vt(44), "ptr",this.__Value, "ptr",&rect, "ptr",UIA_Variant(out)))? UIA_VariantData(out):
	}
/*	VariantToRect(ByRef var, ByRef out="") { ; NOT WORKING
		; in:	VT_VARIANT (SafeArray)
		; out:	AHK Wrapped RECT Struct & ByRef Struct
		return UIA_Hr(DllCall(this.__Vt(45), "ptr",this.__Value, "ptr",var, "ptr",&(out,VarSetCapacity(out,16))))? UIA_RectToObject(out):
	}
*/
	;~ SafeArrayToRectNativeArray 	46
	;~ CreateProxyFactoryEntry 	47
	GetPropertyProgrammaticName(Id) {
		return UIA_Hr(DllCall(this.__Vt(49), "ptr",this.__Value, "int",Id, "ptr*",out))? StrGet(out):
	}
	GetPatternProgrammaticName(Id) {
		return UIA_Hr(DllCall(this.__Vt(50), "ptr",this.__Value, "int",Id, "ptr*",out))? StrGet(out):
	}
	PollForPotentialSupportedPatterns(e, Byref Ids="", Byref Names="") {
		return UIA_Hr(DllCall(this.__Vt(51), "ptr",this.__Value, "ptr",e.__Value, "ptr*",Ids, "ptr*",Names))? UIA_SafeArraysToObject(Names:=ComObj(0x2008,Names,1),Ids:=ComObj(0x2003,Ids,1)):
	}
	PollForPotentialSupportedProperties(e, Byref Ids="", Byref Names="") {
		return UIA_Hr(DllCall(this.__Vt(52), "ptr",this.__Value, "ptr",e.__Value, "ptr*",Ids, "ptr*",Names))? UIA_SafeArraysToObject(Names:=ComObj(0x2008,Names,1),Ids:=ComObj(0x2003,Ids,1)):
	}
	CheckNotSupported(value) { ; Useless in this Framework???
	/*	Checks a provided VARIANT to see if it contains the Not Supported identifier.
		After retrieving a property for a UI Automation element, call this method to determine whether the element supports the 
		retrieved property. CheckNotSupported is typically called after calling a property retrieving method such as GetCurrentPropertyValue.
	*/
		return UIA_Hr(DllCall(this.__Vt(53), "ptr",this.__Value, "ptr",value, "int*",out))? out:
	}
	ElementFromIAccessible(IAcc, childId=0) {
	/* The method returns E_INVALIDARG - "One or more arguments are not valid" - if the underlying implementation of the
	Microsoft UI Automation element is not a native Microsoft Active Accessibility server; that is, if a client attempts to retrieve
	the IAccessible interface for an element originally supported by a proxy object from Oleacc.dll, or by the UIA-to-MSAA Bridge.
	*/
		return UIA_Hr(DllCall(this.__Vt(56), "ptr",this.__Value, "ptr",ComObjValue(IAcc), "int",childId, "ptr*",out))? new UIA_Element(out):
	}
	;~ ElementFromIAccessibleBuildCache 	57
}

class UIA_Element extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671425(v=vs.85).aspx
	static __IID := "{d22108aa-8ac5-49a5-837b-37bbb3d7591e}"
		,  __properties := "CurrentProcessId,20,int`r`nCurrentControlType,21,CONTROLTYPEID`r`nCurrentLocalizedControlType,22,BSTR`r`nCurrentName,23,BSTR`r`nCurrentAcceleratorKey,24,BSTR`r`nCurrentAccessKey,25,BSTR`r`nCurrentHasKeyboardFocus,26,BOOL`r`nCurrentIsKeyboardFocusable,27,BOOL`r`nCurrentIsEnabled,28,BOOL`r`nCurrentAutomationId,29,BSTR`r`nCurrentClassName,30,BSTR`r`nCurrentHelpText,31,BSTR`r`nCurrentCulture,32,int`r`nCurrentIsControlElement,33,BOOL`r`nCurrentIsContentElement,34,BOOL`r`nCurrentIsPassword,35,BOOL`r`nCurrentNativeWindowHandle,36,UIA_HWND`r`nCurrentItemType,37,BSTR`r`nCurrentIsOffscreen,38,BOOL`r`nCurrentOrientation,39,OrientationType`r`nCurrentFrameworkId,40,BSTR`r`nCurrentIsRequiredForForm,41,BOOL`r`nCurrentItemStatus,42,BSTR`r`nCurrentBoundingRectangle,43,RECT`r`nCurrentLabeledBy,44,IUIAutomationElement`r`nCurrentAriaRole,45,BSTR`r`nCurrentAriaProperties,46,BSTR`r`nCurrentIsDataValidForForm,47,BOOL`r`nCurrentControllerFor,48,IUIAutomationElementArray`r`nCurrentDescribedBy,49,IUIAutomationElementArray`r`nCurrentFlowsTo,50,IUIAutomationElementArray`r`nCurrentProviderDescription,51,BSTR`r`nCachedProcessId,52,int`r`nCachedControlType,53,CONTROLTYPEID`r`nCachedLocalizedControlType,54,BSTR`r`nCachedName,55,BSTR`r`nCachedAcceleratorKey,56,BSTR`r`nCachedAccessKey,57,BSTR`r`nCachedHasKeyboardFocus,58,BOOL`r`nCachedIsKeyboardFocusable,59,BOOL`r`nCachedIsEnabled,60,BOOL`r`nCachedAutomationId,61,BSTR`r`nCachedClassName,62,BSTR`r`nCachedHelpText,63,BSTR`r`nCachedCulture,64,int`r`nCachedIsControlElement,65,BOOL`r`nCachedIsContentElement,66,BOOL`r`nCachedIsPassword,67,BOOL`r`nCachedNativeWindowHandle,68,UIA_HWND`r`nCachedItemType,69,BSTR`r`nCachedIsOffscreen,70,BOOL`r`nCachedOrientation,71,OrientationType`r`nCachedFrameworkId,72,BSTR`r`nCachedIsRequiredForForm,73,BOOL`r`nCachedItemStatus,74,BSTR`r`nCachedBoundingRectangle,75,RECT`r`nCachedLabeledBy,76,IUIAutomationElement`r`nCachedAriaRole,77,BSTR`r`nCachedAriaProperties,78,BSTR`r`nCachedIsDataValidForForm,79,BOOL`r`nCachedControllerFor,80,IUIAutomationElementArray`r`nCachedDescribedBy,81,IUIAutomationElementArray`r`nCachedFlowsTo,82,IUIAutomationElementArray`r`nCachedProviderDescription,83,BSTR"
	
	SetFocus() {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value))
	}
	GetRuntimeId(ByRef stringId="") {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "ptr*",sa))? ComObj(0x2003,sa,1):
	}
	FindFirst(c="", scope=0x2) {
		static tc	; TrueCondition
		if !tc
			tc:=this.__uia.CreateTrueCondition()
		return UIA_Hr(DllCall(this.__Vt(5), "ptr",this.__Value, "uint",scope, "ptr",(c=""?tc:c).__Value, "ptr*",out))? new UIA_Element(out):
	}
	FindAll(c="", scope=0x2) {
		static tc	; TrueCondition
		if !tc
			tc:=this.__uia.CreateTrueCondition()
		return UIA_Hr(DllCall(this.__Vt(6), "ptr",this.__Value, "uint",scope, "ptr",(c=""?tc:c).__Value, "ptr*",out))? UIA_ElementArray(out):
	}
	;~ Find (First/All, Element/Children/Descendants/Parent/Ancestors/Subtree, Conditions)
	;~ FindFirstBuildCache 	7	IUIAutomationElement
	;~ FindAllBuildCache 	8	IUIAutomationElementArray
	;~ BuildUpdatedCache 	9	IUIAutomationElement
	GetCurrentPropertyValue(propertyId, ByRef out="") {
		return UIA_Hr(DllCall(this.__Vt(10), "ptr",this.__Value, "uint",propertyId, "ptr",UIA_Variant(out)))? UIA_VariantData(out):
	}
	GetCurrentPropertyValueEx(propertyId, ignoreDefaultValue=1, ByRef out="") {
	; Passing FALSE in the ignoreDefaultValue parameter is equivalent to calling GetCurrentPropertyValue
		return UIA_Hr(DllCall(this.__Vt(11), "ptr",this.__Value, "uint",propertyId, "uint",ignoreDefaultValue, "ptr",UIA_Variant(out)))? UIA_VariantData(out):
	}
	;~ GetCachedPropertyValue 	12	VARIANT
	;~ GetCachedPropertyValueEx 	13	VARIANT
	GetCurrentPatternAs(pattern="") {
		if IsObject(UIA_%pattern%Pattern)&&(iid:=UIA_%pattern%Pattern.__iid)&&(pId:=UIA_%pattern%Pattern.__PatternID)
			return UIA_Hr(DllCall(this.__Vt(14), "ptr",this.__Value, "int",pId, "ptr",UIA_GUID(riid,iid), "ptr*",out))? new UIA_%pattern%Pattern(out):
		else throw Exception("Pattern not implemented.",-1, "UIA_" pattern "Pattern")
	}
	;~ GetCachedPatternAs 	15	void **ppv
	;~ GetCurrentPattern 	16	Iunknown **patternObject
	;~ GetCachedPattern 	17	Iunknown **patternObject
	;~ GetCachedParent 	18	IUIAutomationElement
	GetCachedChildren() { ; Haven't successfully tested
		return UIA_Hr(DllCall(this.__Vt(19), "ptr",this.__Value, "ptr*",out))&&out? UIA_ElementArray(out):
	}
	;~ GetClickablePoint 	84	POINT, BOOL
}

class UIA_ElementArray extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671426(v=vs.85).aspx
	static __IID := "{14314595-b4bc-4055-95f2-58f2e42c9855}"
		,  __properties := "Length,3,int"
	
	GetElement(i) {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "int",i, "ptr*",out))? new UIA_Element(out):
	}
}

class UIA_TreeWalker extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671470(v=vs.85).aspx
	static __IID := "{4042c624-389c-4afc-a630-9df854a541fc}"
		,  __properties := "Condition,15,IUIAutomationCondition"
	
	GetParentElement(e) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))? new UIA_Element(out):
	}
	GetFirstChildElement(e) {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))&&out? new UIA_Element(out):
	}
	GetLastChildElement(e) {
		return UIA_Hr(DllCall(this.__Vt(5), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))&&out? new UIA_Element(out):
	}
	GetNextSiblingElement(e) {
		return UIA_Hr(DllCall(this.__Vt(6), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))&&out? new UIA_Element(out):
	}
	GetPreviousSiblingElement(e) {
		return UIA_Hr(DllCall(this.__Vt(7), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))&&out? new UIA_Element(out):
	}
	NormalizeElement(e) {
		return UIA_Hr(DllCall(this.__Vt(8), "ptr",this.__Value, "ptr",e.__Value, "ptr*",out))&&out? new UIA_Element(out):
	}
/*	GetParentElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(9), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value.__Value, "ptr*",out))? new UIA_Element(out):
	}
	GetFirstChildElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(10), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value, "ptr*",out))? new UIA_Element(out):
	}
	GetLastChildElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(11), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value, "ptr*",out))? new UIA_Element(out):
	}
	GetNextSiblingElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(12), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value, "ptr*",out))? new UIA_Element(out):
	}
	GetPreviousSiblingElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(13), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value, "ptr*",out))? new UIA_Element(out):
	}
	NormalizeElementBuildCache(e, cacheRequest) {
		return UIA_Hr(DllCall(this.__Vt(14), "ptr",this.__Value, "ptr",e.__Value, "ptr",cacheRequest.__Value, "ptr*",out))? new UIA_Element(out):
	}
*/
}

class UIA_Condition extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671420(v=vs.85).aspx
	static __IID := "{352ffba8-0973-437c-a61f-f64cafd81df9}"
}

class UIA_PropertyCondition extends UIA_Condition {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696121(v=vs.85).aspx
	static __IID := "{99ebf2cb-5578-4267-9ad4-afd6ea77e94b}"
		,  __properties := "PropertyId,3,PROPERTYID`r`nPropertyValue,4,VARIANT`r`nPropertyConditionFlags,5,PropertyConditionFlags"
}
; should returned children have a condition type (property/and/or/bool/not), or be a generic uia_condition object?
class UIA_AndCondition extends UIA_Condition {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671407(v=vs.85).aspx
	static __IID := "{a7d0af36-b912-45fe-9855-091ddc174aec}"
		,  __properties := "ChildCount,3,int"
	
	;~ GetChildrenAsNativeArray	4	IUIAutomationCondition ***childArray
	GetChildren() {
		return UIA_Hr(DllCall(this.__Vt(5), "ptr",this.__Value, "ptr*",out))&&out? ComObj(0x2003,out,1):
	}
}
class UIA_OrCondition extends UIA_Condition {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696108(v=vs.85).aspx
	static __IID := "{8753f032-3db1-47b5-a1fc-6e34a266c712}"
		,  __properties := "ChildCount,3,int"
	
	;~ GetChildrenAsNativeArray	4	IUIAutomationCondition ***childArray
	;~ GetChildren	5	SAFEARRAY
}
class UIA_BoolCondition extends UIA_Condition {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671411(v=vs.85).aspx
	static __IID := "{8753f032-3db1-47b5-a1fc-6e34a266c712}"
		,  __properties := "BooleanValue,3,boolVal"
}
class UIA_NotCondition extends UIA_Condition {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696106(v=vs.85).aspx
	static __IID := "{f528b657-847b-498c-8896-d52b565407a1}"
	
	;~ GetChild	3	IUIAutomationCondition
}

class UIA_IUnknown extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ms680509(v=vs.85).aspx
	static __IID := "{00000000-0000-0000-C000-000000000046}"
}

class UIA_CacheRequest  extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671413(v=vs.85).aspx
	static __IID := "{b32a92b5-bc25-4078-9c08-d7ee95c48e03}"
}


class _UIA_EventHandler {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696044(v=vs.85).aspx
	static __IID := "{146c3c17-f12e-4e22-8c27-f894b9b79c69}"
	
/*	HandleAutomationEvent	3
		[in]  IUIAutomationElement *sender,
		[in]  EVENTID eventId
*/
}
class _UIA_FocusChangedEventHandler {		
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696051(v=vs.85).aspx
	static __IID := "{c270f6b5-5c69-4290-9745-7a7f97169468}"
	
/*	HandleFocusChangedEvent	3
		[in]  IUIAutomationElement *sender
*/
}
class _UIA_PropertyChangedEventHandler {		
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696119(v=vs.85).aspx
	static __IID := "{40cd37d4-c756-4b0c-8c6f-bddfeeb13b50}"
	
/*	HandlePropertyChangedEvent	3
		[in]  IUIAutomationElement *sender,
		[in]  PROPERTYID propertyId,
		[in]  VARIANT newValue
*/
}
class _UIA_StructureChangedEventHandler {		
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696197(v=vs.85).aspx
	static __IID := "{e81d1b4e-11c5-42f8-9754-e7036c79f054}"
	
/*	HandleStructureChangedEvent	3
		[in]  IUIAutomationElement *sender,
		[in]  StructureChangeType changeType,
		[in]  SAFEARRAY *runtimeId[int]
*/
}
class _UIA_TextEditTextChangedEventHandler { ; Windows 8.1 Preview [desktop apps only]
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/dn302202(v=vs.85).aspx
	static __IID := "{92FAA680-E704-4156-931A-E32D5BB38F3F}"
	
	;~ HandleTextEditTextChangedEvent	3
}


;~ 		UIA_Patterns - http://msdn.microsoft.com/en-us/library/windows/desktop/ee684023
class UIA_DockPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee671421
	static	__IID := "{fde5ef97-1464-48f6-90bf-43d0948e86ec}"
		,	__PatternID := 10011
		,	__Properties := "CurrentDockPosition,4,int`r`nCachedDockPosition,5,int"

	SetDockPosition(Pos) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "uint",pos))
	}
/*	DockPosition_Top	= 0,
	DockPosition_Left	= 1,
	DockPosition_Bottom	= 2,
	DockPosition_Right	= 3,
	DockPosition_Fill	= 4,
	DockPosition_None	= 5
*/
}
class UIA_ExpandCollapsePattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696046
	static	__IID := "{619be086-1f4e-4ee4-bafa-210128738730}"
		,	__PatternID := 10005
		,	__Properties := "CachedExpandCollapseState,6,int`r`nCurrentExpandCollapseState,5,int"
	
	Expand() {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value))
	}
	Collapse() {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value))
	}	
/*	ExpandCollapseState_Collapsed	= 0,
	ExpandCollapseState_Expanded	= 1,
	ExpandCollapseState_PartiallyExpanded	= 2,
	ExpandCollapseState_LeafNode	= 3
*/
}
class UIA_GridItemPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696053
	static	__IID := "{78f8ef57-66c3-4e09-bd7c-e79b2004894d}"
		,	__PatternID := 10007
		,	__Properties := "CurrentContainingGrid,3,IUIAutomationElement`r`nCurrentRow,4,int`r`nCurrentColumn,5,int`r`nCurrentRowSpan,6,int`r`nCurrentColumnSpan,7,int`r`nCachedContainingGrid,8,IUIAutomationElement`r`nCachedRow,9,int`r`nCachedColumn,10,int`r`nCachedRowSpan,11,int`r`nCachedColumnSpan,12,int"
}
class UIA_GridPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696064
	static	__IID := "{414c3cdc-856b-4f5b-8538-3131c6302550}"
		,	__PatternID := 10006
		,	__Properties := "CurrentRowCount,4,int`r`nCurrentColumnCount,5,int`r`nCachedRowCount,6,int`r`nCachedColumnCount,7,int"

	GetItem(row,column) { ; Hr!=0 if no result, or blank output?
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "uint",row, "uint",column, "ptr*",out))? new UIA_Element(out):
	}
}
class UIA_InvokePattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696070
	static	__IID := "{fb377fbe-8ea6-46d5-9c73-6499642d3059}"
		,	__PatternID := 10000
	
	Invoke() {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value))
	}
}
class UIA_ItemContainerPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696072
	static	__IID := "{c690fdb2-27a8-423c-812d-429773c9084e}"
		,	__PatternID := 10019

	FindItemByProperty(startAfter, propertyId, ByRef value, type=8) {	; Hr!=0 if no result, or blank output?
		if (type!="Variant")
			UIA_Variant(value,type,value)
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "ptr",startAfter.__Value, "int",propertyId, "ptr",&value, "ptr*",out))? new UIA_Element(out):
	}
}
class UIA_LegacyIAccessiblePattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696074
	static	__IID := "{828055ad-355b-4435-86d5-3b51c14a9b1b}"
		,	__PatternID := 10018
		,	__Properties := "CurrentChildId,6,int`r`nCurrentName,7,BSTR`r`nCurrentValue,8,BSTR`r`nCurrentDescription,9,BSTR`r`nCurrentRole,10,DWORD`r`nCurrentState,11,DWORD`r`nCurrentHelp,12,BSTR`r`nCurrentKeyboardShortcut,13,BSTR`r`nCurrentDefaultAction,15,BSTR`r`nCachedChildId,16,int`r`nCachedName,17,BSTR`r`nCachedValue,18,BSTR`r`nCachedDescription,19,BSTR`r`nCachedRole,20,DWORD`r`nCachedState,21,DWORD`r`nCachedHelp,22,BSTR`r`nCachedKeyboardShortcut,23,BSTR`r`nCachedDefaultAction,25,BSTR"

	Select(flags=3) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "int",flags))
	}
	DoDefaultAction() {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value))
	}
	SetValue(value) {
		return UIA_Hr(DllCall(this.__Vt(5), "ptr",this.__Value, "ptr",&value))
	}
	GetCurrentSelection() { ; Not correct
		;~ if (hr:=DllCall(this.__Vt(14), "ptr",this.__Value, "ptr*",array))=0
			;~ return new UIA_ElementArray(array)
		;~ else
			;~ MsgBox,, Error, %hr%
	}
	;~ GetCachedSelection	24	IUIAutomationElementArray
	GetIAccessible() {
	/*	This method returns NULL if the underlying implementation of the UI Automation element is not a native 
	Microsoft Active Accessibility server; that is, if a client attempts to retrieve the IAccessible interface 
	for an element originally supported by a proxy object from OLEACC.dll, or by the UIA-to-MSAA Bridge.
	*/
		return UIA_Hr(DllCall(this.__Vt(26), "ptr",this.__Value, "ptr*",pacc))&&pacc? ComObj(9,pacc,1):
	}
}
class UIA_MultipleViewPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696099
	static	__IID := "{8d253c91-1dc5-4bb5-b18f-ade16fa495e8}"
		,	__PatternID := 10008
		,	__Properties := "CurrentCurrentView,5,int`r`nCachedCurrentView,7,int"

	GetViewName(view) { ; need to release BSTR?
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "int",view, "ptr*",name))? StrGet(name):
	}
	SetCurrentView(view) {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "int",view))
	}
	GetCurrentSupportedViews() {
		return UIA_Hr(DllCall(this.__Vt(6), "ptr",this.__Value, "ptr*",out))? ComObj(0x2003,out,1):
	}
	GetCachedSupportedViews() {
		return UIA_Hr(DllCall(this.__Vt(8), "ptr",this.__Value, "ptr*",out))? ComObj(0x2003,out,1):
	}
}
class UIA_RangeValuePattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696147
	static	__IID := "{59213f4f-7346-49e5-b120-80555987a148}"
		,	__PatternID := 10003
		,	__Properties := "CurrentValue,4,double`r`nCurrentIsReadOnly,5,BOOL`r`nCurrentMaximum,6,double`r`nCurrentMinimum,7,double`r`nCurrentLargeChange,8,double`r`nCurrentSmallChange,9,double`r`nCachedValue,10,double`r`nCachedIsReadOnly,11,BOOL`r`nCachedMaximum,12,double`r`nCachedMinimum,13,double`r`nCachedLargeChange,14,double`r`nCachedSmallChange,15,double"

	SetValue(val) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "double",val))
	}
}
class UIA_ScrollItemPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696165
	static	__IID := "{b488300f-d015-4f19-9c29-bb595e3645ef}"
		,	__PatternID := 10017

	ScrollIntoView() {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value))
	}
}
class UIA_ScrollPattern extends UIA_Base {
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/ee696167
	static	__IID := "{88f4d42a-e881-459d-a77c-73bbbb7e02dc}"
		,	__PatternID := 10004
		,	__Properties := "CurrentHorizontalScrollPercent,5,double`r`nCurrentVerticalScrollPercent,6,double`r`nCurrentHorizontalViewSize,7,double`r`CurrentHorizontallyScrollable,9,BOOL`r`nCurrentVerticallyScrollable,10,BOOL`r`nCachedHorizontalScrollPercent,11,double`r`nCachedVerticalScrollPercent,12,double`r`nCachedHorizontalViewSize,13,double`r`nCachedVerticalViewSize,14,double`r`nCachedHorizontallyScrollable,15,BOOL`r`nCachedVerticallyScrollable,16,BOOL"
		
	Scroll(horizontal, vertical) {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value, "uint",horizontal, "uint",vertical))
	}
	SetScrollPercent(horizontal, vertical) {
		return UIA_Hr(DllCall(this.__Vt(4), "ptr",this.__Value, "double",horizontal, "double",vertical))
	}
/*	UIA_ScrollPatternNoScroll	=	-1
	ScrollAmount_LargeDecrement	= 0,
	ScrollAmount_SmallDecrement	= 1,
	ScrollAmount_NoAmount	= 2,
	ScrollAmount_LargeIncrement	= 3,
	ScrollAmount_SmallIncrement	= 4
*/
}
;~ class UIA_SelectionItemPattern extends UIA_Base {10010
;~ class UIA_SelectionPattern extends UIA_Base {10001
;~ class UIA_SpreadsheetItemPattern extends UIA_Base {10027
;~ class UIA_SpreadsheetPattern extends UIA_Base {10026
;~ class UIA_StylesPattern extends UIA_Base {10025
;~ class UIA_SynchronizedInputPattern extends UIA_Base {10021
;~ class UIA_TableItemPattern extends UIA_Base {10013
;~ class UIA_TablePattern extends UIA_Base {10012
;~ class UIA_TextChildPattern extends UIA_Base {10029
;~ class UIA_TextEditPattern extends UIA_Base {10032
;~ class UIA_TextPattern extends UIA_Base {10014
;~ class UIA_TextPattern2 extends UIA_Base {10024
;~ class UIA_TogglePattern extends UIA_Base {10015
;~ class UIA_TransformPattern extends UIA_Base {10016
;~ class UIA_TransformPattern2 extends UIA_Base {10028
;~ class UIA_ValuePattern extends UIA_Base {10002
;~ class UIA_VirtualizedItemPattern extends UIA_Base {10020
;~ class UIA_WindowPattern extends UIA_Base {10009
;~ class UIA_AnnotationPattern extends UIA_Base {10023		; Windows 8 [desktop apps only]
;~ class UIA_DragPattern extends UIA_Base {10030			; Windows 8 [desktop apps only]
;~ class UIA_DropTargetPattern extends UIA_Base {10031		; Windows 8 [desktop apps only]
/* class UIA_ObjectModelPattern extends UIA_Base {			; Windows 8 [desktop apps only]
	;~ http://msdn.microsoft.com/en-us/library/windows/desktop/hh437262(v=vs.85).aspx
	static	__IID := "{71c284b3-c14d-4d14-981e-19751b0d756d}"
		,	__PatternID := 10022
	
	GetUnderlyingObjectModel() {
		return UIA_Hr(DllCall(this.__Vt(3), "ptr",this.__Value))
	}
}
*/

;~ class UIA_PatternHandler extends UIA_Base {
;~ class UIA_PatternInstance extends UIA_Base {
;~ class UIA_TextRange extends UIA_Base {
;~ class UIA_TextRange2 extends UIA_Base {
;~ class UIA_TextRangeArray extends UIA_Base {




{  ;~ UIA Functions
	UIA_Interface() {
		try {
			if uia:=ComObjCreate("{ff48dba4-60ef-4201-aa87-54103eef594e}","{30cbe57d-d9d0-452a-ab13-7ac5ac4825ee}")
				return uia:=new UIA_Interface(uia), uia.base.base.__UIA:=uia
			throw "UIAutomation Interface failed to initialize."
		} catch e
			MsgBox, 262160, UIA Startup Error, % IsObject(e)?"IUIAutomation Interface is not registered.":e.Message
	}
	UIA_Hr(hr) {
		;~ http://blogs.msdn.com/b/eldar/archive/2007/04/03/a-lot-of-hresult-codes.aspx
		static err:={0x8000FFFF:"Catastrophic failure.",0x80004001:"Not implemented.",0x8007000E:"Out of memory.",0x80070057:"One or more arguments are not valid.",0x80004002:"Interface not supported.",0x80004003:"Pointer not valid.",0x80070006:"Handle not valid.",0x80004004:"Operation aborted.",0x80004005:"Unspecified error.",0x80070005:"General access denied.",0x800401E5:"The object identified by this moniker could not be found.",0x80040201:"UIA_E_ELEMENTNOTAVAILABLE",0x80040200:"UIA_E_ELEMENTNOTENABLED",0x80131509:"UIA_E_INVALIDOPERATION",0x80040202:"UIA_E_NOCLICKABLEPOINT",0x80040204:"UIA_E_NOTSUPPORTED",0x80040203:"UIA_E_PROXYASSEMBLYNOTLOADED"} ; //not completed
		if hr&&(hr&=0xFFFFFFFF) {
			RegExMatch(Exception("",-2).what,"(\w+).(\w+)",i)
			throw Exception(UIA_Hex(hr) " - " err[hr], -2, i2 "  (" i1 ")")
		}
		return !hr
	}
	UIA_NotImplemented() {
		RegExMatch(Exception("",-2).What,"(\D+)\.(\D+)",m)
		MsgBox, 262192, UIA Message, Class:`t%m1%`nMember:`t%m2%`n`nMethod has not been implemented yet.
	}
	UIA_ElementArray(p, uia="") { ; should AHK Object be 0 or 1 based?
		a:=new UIA_ElementArray(p),out:=[]
		Loop % a.Length
			out[A_Index]:=a.GetElement(A_Index-1)
		return out, out.base:={UIA_ElementArray:a}
	}
	UIA_RectToObject(ByRef r) { ; rect.__Value work with DllCalls?
		static b:={__Class:"object",__Type:"RECT",Struct:Func("UIA_RectStructure")}
		return {l:NumGet(r,0,"Int"),t:NumGet(r,4,"Int"),r:NumGet(r,8,"Int"),b:NumGet(r,12,"Int"),base:b}
	}
	UIA_RectStructure(this, ByRef r) {
		static sides:="ltrb"
		VarSetCapacity(r,16)
		Loop Parse, sides
			NumPut(this[A_LoopField],r,(A_Index-1)*4,"Int")
	}
	UIA_SafeArraysToObject(keys,values) {
	;~	1 dim safearrays w/ same # of elements
		out:={}
		for key in keys
			out[key]:=values[A_Index-1]
		return out
	}
	UIA_Hex(p) {
		setting:=A_FormatInteger
		SetFormat,IntegerFast,H
		out:=p+0 ""
		SetFormat,IntegerFast,%setting%
		return out
	}
	UIA_GUID(ByRef GUID, sGUID) { ;~ Converts a string to a binary GUID and returns its address.
		VarSetCapacity(GUID,16,0)
		return DllCall("ole32\CLSIDFromString", "wstr",sGUID, "ptr",&GUID)>=0?&GUID:""
	}
	UIA_Variant(ByRef var,type=0,val=0) {
		; Does a variant need to be cleared? If it uses SysAllocString? 
		return (VarSetCapacity(var,8+2*A_PtrSize)+NumPut(type,var,0,"short")+NumPut(type=8? DllCall("oleaut32\SysAllocString", "ptr",&val):val,var,8,"ptr"))*0+&var
	}
	UIA_IsVariant(ByRef vt, ByRef type="") {
		size:=VarSetCapacity(vt),type:=NumGet(vt,"UShort")
		return size>=16&&size<=24&&type>=0&&(type<=23||type|0x2000)
	}
	UIA_Type(ByRef item, ByRef info) {
	}
	UIA_VariantData(ByRef p, flag=1) {
		; based on Sean's COM_Enumerate function
		; need to clear varaint? what if you still need it (flag param)?
		return !UIA_IsVariant(p,vt)?"Invalid Variant"
				:vt=3?NumGet(p,8,"int")
				:vt=8?StrGet(NumGet(p,8))
				:vt=9||vt=13||vt&0x2000?ComObj(vt,NumGet(p,8),flag)
				:vt<0x1000&&UIA_VariantChangeType(&p,&p)=0?StrGet(NumGet(p,8)) UIA_VariantClear(&p)
				:NumGet(p,8)
	/*
		VT_EMPTY     =      0  		; No value
		VT_NULL      =      1 		; SQL-style Null
		VT_I2        =      2 		; 16-bit signed int
		VT_I4        =      3 		; 32-bit signed int
		VT_R4        =      4 		; 32-bit floating-point number
		VT_R8        =      5 		; 64-bit floating-point number
		VT_CY        =      6 		; Currency
		VT_DATE      =      7  		; Date
		VT_BSTR      =      8 		; COM string (Unicode string with length prefix)
		VT_DISPATCH  =      9 		; COM object 
		VT_ERROR     =    0xA  10	; Error code (32-bit integer)
		VT_BOOL      =    0xB  11	; Boolean True (-1) or False (0)
		VT_VARIANT   =    0xC  12	; VARIANT (must be combined with VT_ARRAY or VT_BYREF)
		VT_UNKNOWN   =    0xD  13	; IUnknown interface pointer
		VT_DECIMAL   =    0xE  14	; (not supported)
		VT_I1        =   0x10  16	; 8-bit signed int
		VT_UI1       =   0x11  17	; 8-bit unsigned int
		VT_UI2       =   0x12  18	; 16-bit unsigned int
		VT_UI4       =   0x13  19	; 32-bit unsigned int
		VT_I8        =   0x14  20	; 64-bit signed int
		VT_UI8       =   0x15  21	; 64-bit unsigned int
		VT_INT       =   0x16  22	; Signed machine int
		VT_UINT      =   0x17  23	; Unsigned machine int
		VT_RECORD    =   0x24  36	; User-defined type
		VT_ARRAY     = 0x2000  		; SAFEARRAY
		VT_BYREF     = 0x4000  		; Pointer to another type of value
					 = 0x1000  4096
		COM_VariantChangeType(pvarDst, pvarSrc, vt=8) {
			return DllCall("oleaut32\VariantChangeTypeEx", "ptr",pvarDst, "ptr",pvarSrc, "Uint",1024, "Ushort",0, "Ushort",vt)
		}
		COM_VariantClear(pvar) {
			DllCall("oleaut32\VariantClear", "ptr",pvar)
		}
		COM_SysAllocString(str) {
			Return	DllCall("oleaut32\SysAllocString", "Uint", &str)
		}
		COM_SysFreeString(pstr) {
				DllCall("oleaut32\SysFreeString", "Uint", pstr)
		}
		COM_SysString(ByRef wString, sString) {
			VarSetCapacity(wString,4+nLen:=2*StrLen(sString))
			Return	DllCall("kernel32\lstrcpyW","Uint",NumPut(nLen,wString),"Uint",&sString)
		}
	*/
	}
	UIA_VariantChangeType(pvarDst, pvarSrc, vt=8) { ; written by Sean
		return DllCall("oleaut32\VariantChangeTypeEx", "ptr",pvarDst, "ptr",pvarSrc, "Uint",1024, "Ushort",0, "Ushort",vt)
	}
	UIA_VariantClear(pvar) { ; Written by Sean
		DllCall("oleaut32\VariantClear", "ptr",pvar)
	}
}
MsgBox(msg) {
	MsgBox %msg%
}

/*
enum TreeScope
    {	TreeScope_Element	= 0x1,
	TreeScope_Children	= 0x2,
	TreeScope_Descendants	= 0x4,
	TreeScope_Parent	= 0x8,
	TreeScope_Ancestors	= 0x10,
	TreeScope_Subtree	= ( ( TreeScope_Element | TreeScope_Children )  | TreeScope_Descendants ) 
    } ;
DllCall("oleaut32\SafeArrayGetVartype", "ptr*",ComObjValue(SafeArray), "uint*",pvt)
HRESULT SafeArrayGetVartype(
  _In_   SAFEARRAY *psa,
  _Out_  VARTYPE *pvt
);
DllCall("oleaut32\SafeArrayDestroy", "ptr",ComObjValue(SafeArray))
HRESULT SafeArrayDestroy(
  _In_  SAFEARRAY *psa
);

950

Re: AHK: Замена "Window Spy"

Время нет, надо подумать. А что за ApplicationFrameHost.exe?
И как выводить, в заголовок (не вкладку) Window добавить Pid, а ниже добавить ещё заголовок Control window parent с теми же данными.

ahk_class IEFrame ahk_exe iexplore.exe ahk_id 0x104c8 ahk_pid 4245
По вопросам возмездной помощи пишите письма
E-Mail: serzh82saratov@mail.ru
OS: Win7x64, AutoHotkey_L v1.1.29.01 (Unicode 32-bit).